LATHE RIMEX 380x5000
Diameter between 600 e 800 mm
lathe conventional - Used
RIMEX
08150
MOD. CU 760
TECHNICAL FEATURES:
- Swing diameter over bed mm 760
- Swing diameter over carriage mm 520
- Distance between centers 5000 mm
- Spindle speed no.15
- Spindle speed range 8-1050 rpm
- Spindle bore mm 130
- Main motor power Kw 11
MACCHINA BASE ED ACCESSORI STANDARD:
-Cast iron bed
-bed guideways width hardened and ground mm 560
-Head with hardened and ground gears
-Machanical brake and clutch
-Spindle nose DIN 55027 n.11
-Type of threading execution: Metric , whitworth, modular, diametral pitch
-Elecrtical cabinet/cables, general switch for door interlock, rele termico main motor cover, emergency brake with push botton and foot pedal, low voltage electric supply 24V
-Carriage with cross and longitudinal rapid feedrates
-Tailstock with quill diam mm.95
-Coolant system with electropump
-Guideway lubrication system with manual pump
-lighting system
-Back plate for chuck mm.400
-Turret GFB type D with 5 toolholders
-Spindle adapter sleeve
-Full lenght rear splash guard, splash guard for chuck and turret guard
-Shaft and leadscrew protection
-Manual books and EC conformity
MACHINE EQUIPED WITH:
-No. 02 steadies
-Chuck diameter mm 315 3+3+3
MACCHINA USATA
08150
MOD. CU 760
TECHNICAL FEATURES:
- Swing diameter over bed mm 760
- Swing diameter over carriage mm 520
- Distance between centers 5000 mm
- Spindle speed no.15
- Spindle speed range 8-1050 rpm
- Spindle bore mm 130
- Main motor power Kw 11
MACCHINA BASE ED ACCESSORI STANDARD:
-Cast iron bed
-bed guideways width hardened and ground mm 560
-Head with hardened and ground gears
-Machanical brake and clutch
-Spindle nose DIN 55027 n.11
-Type of threading execution: Metric , whitworth, modular, diametral pitch
-Elecrtical cabinet/cables, general switch for door interlock, rele termico main motor cover, emergency brake with push botton and foot pedal, low voltage electric supply 24V
-Carriage with cross and longitudinal rapid feedrates
-Tailstock with quill diam mm.95
-Coolant system with electropump
-Guideway lubrication system with manual pump
-lighting system
-Back plate for chuck mm.400
-Turret GFB type D with 5 toolholders
-Spindle adapter sleeve
-Full lenght rear splash guard, splash guard for chuck and turret guard
-Shaft and leadscrew protection
-Manual books and EC conformity
MACHINE EQUIPED WITH:
-No. 02 steadies
-Chuck diameter mm 315 3+3+3
MACCHINA USATA
FILL OUT OUR FORM FOR MORE INFORMATION
Potrebbero interessarti
LATHE ITAMA MOD. 165/10
RIMEX
09510
Turning diameter over the bed mm 330
Turning diameter in the gap mm 476
Height of centers mm...
09510
Turning diameter over the bed mm 330
Turning diameter in the gap mm 476
Height of centers mm...
LATHE GIANA 360x1800
RIMEX
08959
HEIGHT OF CENTER ON BED MM 360
HEIGHT OF CENTER ON CARRIAGE MM 240
HEIGHT OF CENTER ON GAP MM...
08959
HEIGHT OF CENTER ON BED MM 360
HEIGHT OF CENTER ON CARRIAGE MM 240
HEIGHT OF CENTER ON GAP MM...
LATHE SAIC MOD. IT 165 HGB
RIMEX
09521
Height of centers 167 mm
Max turning diameter on the carriage 210 mm
Max turning diameter on the...
09521
Height of centers 167 mm
Max turning diameter on the carriage 210 mm
Max turning diameter on the...
LATHE MERLI CLOVIS 50B
RIMEX
09819
Height of centers over the bench 640 mm
Height of centers over the carriage 460 mm
Swing diameter...
09819
Height of centers over the bench 640 mm
Height of centers over the carriage 460 mm
Swing diameter...
X
Invia tramite e-mail
X
Scarica PDF
Enter your email address to receive a link to download the PDF
Per poter procedere, la prima volta devi inserire i Tuoi dati