T-TYPE BORING COLGAR
T type
boring - Used
COLGAR
08787
MOD. PROGRAM 213 TR 12
CNC SIEMENS 840D Powerline
TECHNICAL DATA
WORK AREA:
X axis - longitudinal stroke of the table 3,500 mm
Y axis - Vertical stroke of the head 2.000 mm
Axis Z - Cross travel of the mast 2.650 mm
W axis - Cross stroke of the boring spindle 700 mm
AXIS B:
Continuous table rotation
Positioning step for 360.000 pos. 0.001 degrees
B axis with mechanical indexing in positions pos. 4 x 90 degrees
Diameter of the hydrostatic fifth wheel 1200 mm
Table dimensions 1800x2000 mm
Maximum permissible load, uniformly distributed on the table surface 15,000 kg.
RAM:
RAM section 410x505 mm
Projection of the head 500 mm
SPINDLE:
Boring spindle diameter 130 mm
Spindle taper ISO 50
Spindle rotation speed 3000 rpm.
FEED RATE:
Hydrostatic B axis rotation 0.002 ÷ 2 rpm
Force 20,000 Nm
Rapid feeds 20.000 mm / min.
MOTOR POWER:
Spindle motor in continuous service S1 100% 37 kW
Spindle torque 2,200 Nm.
HEAD:
Automatic double spindle head VT2S 2,5 degrees
AUTOMATIC TOOL CHANGE:
Tool change 136 positions
EQUIPPED WITH:
-System for external / internal tool coolant
-Heat exchanger
-Direct type measuring instruments: Heidenhain LB 382 C optical scales
-Refrigerant filtration unit
SIEMENS 840D PowerLine numerical control replaced in 2015
Complete washing of the hydrostatic system in 2012
USED MACHINE
08787
MOD. PROGRAM 213 TR 12
CNC SIEMENS 840D Powerline
TECHNICAL DATA
WORK AREA:
X axis - longitudinal stroke of the table 3,500 mm
Y axis - Vertical stroke of the head 2.000 mm
Axis Z - Cross travel of the mast 2.650 mm
W axis - Cross stroke of the boring spindle 700 mm
AXIS B:
Continuous table rotation
Positioning step for 360.000 pos. 0.001 degrees
B axis with mechanical indexing in positions pos. 4 x 90 degrees
Diameter of the hydrostatic fifth wheel 1200 mm
Table dimensions 1800x2000 mm
Maximum permissible load, uniformly distributed on the table surface 15,000 kg.
RAM:
RAM section 410x505 mm
Projection of the head 500 mm
SPINDLE:
Boring spindle diameter 130 mm
Spindle taper ISO 50
Spindle rotation speed 3000 rpm.
FEED RATE:
Hydrostatic B axis rotation 0.002 ÷ 2 rpm
Force 20,000 Nm
Rapid feeds 20.000 mm / min.
MOTOR POWER:
Spindle motor in continuous service S1 100% 37 kW
Spindle torque 2,200 Nm.
HEAD:
Automatic double spindle head VT2S 2,5 degrees
AUTOMATIC TOOL CHANGE:
Tool change 136 positions
EQUIPPED WITH:
-System for external / internal tool coolant
-Heat exchanger
-Direct type measuring instruments: Heidenhain LB 382 C optical scales
-Refrigerant filtration unit
SIEMENS 840D PowerLine numerical control replaced in 2015
Complete washing of the hydrostatic system in 2012
USED MACHINE
FILL OUT OUR FORM FOR MORE INFORMATION
Potrebbero interessarti
BORING TOS WHQ 13
COLGAR
07741
CNC HEIDENHAIN 416
Axis X mm 3500
Axis Y mm 1250
Axis Z [vertical] mm 2500
Axis W quill mm 800...
07741
CNC HEIDENHAIN 416
Axis X mm 3500
Axis Y mm 1250
Axis Z [vertical] mm 2500
Axis W quill mm 800...

BORING PAMA ACC160/380-AL6

BORING "T TYPE" PAMA CENTER
COLGAR
New04954
- axis X mm.3100
- axis Y mm.2000
- axis Z quill stroke mm.450
- axis W column mm.1550
- table...
New04954
- axis X mm.3100
- axis Y mm.2000
- axis Z quill stroke mm.450
- axis W column mm.1550
- table...

BORING TITAN MOD. AFD 150
COLGAR
New04651
TRAVEL COLUMN
-SPINDLE DIAM MM.150
-SPINDLE CONE ISO 50
-N. SPINDLE TURNS [24 POSITIONS] TURNS/MIN....
New04651
TRAVEL COLUMN
-SPINDLE DIAM MM.150
-SPINDLE CONE ISO 50
-N. SPINDLE TURNS [24 POSITIONS] TURNS/MIN....
BORING SAN ROCCO MEC 4
COLGAR
06744
BI-ROTARY HEAD
VISUALIZED
TABLE:
Rotary table dimensions mm 1200x1500
Longitudinal stroke mm...
06744
BI-ROTARY HEAD
VISUALIZED
TABLE:
Rotary table dimensions mm 1200x1500
Longitudinal stroke mm...
X
Invia tramite e-mail
X
Scarica PDF
Enter your email address to receive a link to download the PDF
Per poter procedere, la prima volta devi inserire i Tuoi dati