BOMAC
10119

FC 200x1000
TECHNICAL AND CONSTRUCTION CHARACTERISTICS:
Swing diameter on the bed mm 400
Swing diameter on the slide mm 220
Swing diameter in the gap mm 630
Gap widht mm 240
Bech width mm 380
Distance between center mm 1000
Spindle bore mm 52
Spindle taper ISO 702/III
Spindle speed No. 24/9-1600
Spindle motor power HP 10
Cross stroke mm 320
Carriage stroke mm 145
Metric threads N/mm 48/0.5-24
Inch threads N/tpi 48/72-1/4
Threads diametral N/dp 4/56-1/4
Modular threads N/mm 48/0,5-12
Axis X feeds N/mm-rev. 93/0,028-6,43
Axis Z feeds N/mm-rev. 93/0,012-2,73
Tailstock quill stroke mm 150
Tailstock quill diameter mm 75
Tailstock cone C.M. 5
Tool holder turret, section mm 25x25
Electric cooling pump motor Hp 1
Rapid feeds Hp 0,5
Overall length mm 2632
Overall width mm 975
Overall height mm 1230
Net weight Kg 2050
MACHINE CONFIGURATION:
-Service keys
-Total rear guard
-N.2 rests (steady and follow)
-N.1 rotary tailstock CM 5
-N.2 fixed center points
-Reduction cone
-Cooling system
-Spindle guard self-centering with safety micro
-Operator guard / turret
-Roll-up steel guard lead screw and bar
-Self centering chuck dia. 250 g.s.
-4-jaw independent platform
-Rapid feed on longitudinal and cross
-Mechanical reed clutch
-Emergency brake disc, pneumatic
-Rapid change tool holder turret 4 positions type B
-LED work lighting lamp

NEW MACHINE IN COMPLIANCE WITH CE STANDARDS
COMING SOON