BOMAC
10419

AUTRON LUX FC 250x2000
TECHNICAL AND CONSTRUCTION CHARACTERISTICS:
Swing diameter on the bed mm 500
Swing diameter on the slide mm 300
Swing diameter in the gap mm 710
Gap widht mm 240
Bech width mm 405
Distance between center mm 2000
SPINDLE
Spindle bore mm 105
Spindle taper K.L. 8
Spindle speed No./rpm 12/36-1600
Spindle motor power kw 7,5
TAILSTOCK
Quill diameter mm 75
Quill stroke mm 150
Quill cone CM 5
TURRET:
Tool section mm 25x25
Tool number No.4
CARRIAGE
Cross carriage mm 320
Carriage stroke mm 145
FEEDS
Axis X feeds N/mm-rev. 65/0.063-2.52
Axis Z feeds N/mm-rev. 65/0.027-1.07
THREADS
Metric threads N/mm 22/1-14
Inch threads N/tpi 25/28-2
Modular threads N/mm 18/0,5-7
Threads diametral N/dp 24/56-4
VARIOUS
Electric cooling pump motor KW 0,12
Rapid feeds Hp 0,3
Overall length mm 3632
Overall width mm 995
Overall height mm 1270
Net weight Kg 2500
MACHINE CONFIGURATION:
-Service keys
-Total rear guard
-N.2 rests (steady and follow)
-N.2 fixed center points
-Reduction cone
-Cooling system
-Spindle guard self-centering
-Operator guard
-Roll-up steel guard lead screw
-Self centering chuck dia. 230 g.s.
-4-jaw independent platform
-Rapid feed on longitudinal and cross
-Mechanical reed clutch
-Emergency brake pneumatic
-Fixed tool holder turret
-LED work lighting lamp
-Rapid change tool holder turret 4 positions type C
-DRO 3 axis

NEW MACHINE IN COMPLIANCE WITH CE STANDARDS
IN PROMPT DELIVERY