AUTOMATIC CENTRE LATHE POREBA MOD. TR2D-93 CNC
Autoteaching
lathe cnc - Used
POREBA
06512
TECHNICAL DATA:
-Height of centre mm 465
-Swing over bed mm 930
-Swing over carriage mm 570
-Turning lenght mm 3000
-Max mass carried:
between centres kg 6.000
with one steady kg 7.600
with 2 steadies kg 9.800
in the chuck kg 1.000
SPINDLE:
-Spindle bore mm 300
-Spindle taper A1-20
-Range of revolution rpm 2-450
-Number of speed range 2
-Main motor power kW 30 (continuous operation)
-Max torque at spindle Nm 5600
CARRIAGE:
-Rapid travel in X,Z axis mm/min 4000
-Longitudinal travel mm 3200
-Cross travel mm 580
-Diam X ball screw mm 40x5
-Diam Z ball screw mm 63x10
TAILSTOCK:
-Quill diameter mm 160
-Quill slide out mm 270
-Internal taper Morse 6
OVERALL SIZE
-Lenght mm 3270 + 3000
-Width mm 2735
-Height mm 2200
-Weight kg 11.300
EQUIPPED WITH:
-CNC FANUC 32i-B
-1-way toolpost HASSE for quick replaceable
-voltage supply 3x400 V, 50 Hz
-X and Z axis travels provided from ball screws
-automatic change of range of headstock
-central lubrication controlled by CNC
-chip conveyor
-cooling system for tools 2,6 bar
-lighting system
-2 slideway carriage
-tailstock including quill diam 160 - morse taper no. 6
-dead centre no.6- 1 piece
-shields of working area
-tailstock travel by means of carriage
-control panel movable along the entire machine lenght
-bolts for levelling and anchoring on foundation
-user manual
-CE certificate of conformity
NEW MACHINE READY DELIVERY
06512
TECHNICAL DATA:
-Height of centre mm 465
-Swing over bed mm 930
-Swing over carriage mm 570
-Turning lenght mm 3000
-Max mass carried:
between centres kg 6.000
with one steady kg 7.600
with 2 steadies kg 9.800
in the chuck kg 1.000
SPINDLE:
-Spindle bore mm 300
-Spindle taper A1-20
-Range of revolution rpm 2-450
-Number of speed range 2
-Main motor power kW 30 (continuous operation)
-Max torque at spindle Nm 5600
CARRIAGE:
-Rapid travel in X,Z axis mm/min 4000
-Longitudinal travel mm 3200
-Cross travel mm 580
-Diam X ball screw mm 40x5
-Diam Z ball screw mm 63x10
TAILSTOCK:
-Quill diameter mm 160
-Quill slide out mm 270
-Internal taper Morse 6
OVERALL SIZE
-Lenght mm 3270 + 3000
-Width mm 2735
-Height mm 2200
-Weight kg 11.300
EQUIPPED WITH:
-CNC FANUC 32i-B
-1-way toolpost HASSE for quick replaceable
-voltage supply 3x400 V, 50 Hz
-X and Z axis travels provided from ball screws
-automatic change of range of headstock
-central lubrication controlled by CNC
-chip conveyor
-cooling system for tools 2,6 bar
-lighting system
-2 slideway carriage
-tailstock including quill diam 160 - morse taper no. 6
-dead centre no.6- 1 piece
-shields of working area
-tailstock travel by means of carriage
-control panel movable along the entire machine lenght
-bolts for levelling and anchoring on foundation
-user manual
-CE certificate of conformity
NEW MACHINE READY DELIVERY
FILL OUT OUR FORM FOR MORE INFORMATION
Potrebbero interessarti
FRONTAL LATHE COLOMBO
POREBA
New02678
CNC FAGOR 8020
DIAMETER PLATEAU 1200 MM
TURNING DIAMETER: MM 1500
COMPLETE WITH:
AUTOMATIC...
New02678
CNC FAGOR 8020
DIAMETER PLATEAU 1200 MM
TURNING DIAMETER: MM 1500
COMPLETE WITH:
AUTOMATIC...
LATHE MENTI MOD. 430/1200
POREBA
09079
LIVE TOOLS
CNC SIMENES 810D
CAPACITY:
Max turning lenght mm 2000
Max swing diameter mm 1250
Max...
09079
LIVE TOOLS
CNC SIMENES 810D
CAPACITY:
Max turning lenght mm 2000
Max swing diameter mm 1250
Max...
LATHE SAFOP LEONARD 50/S-CNC
LATHE GRAZIANO MOD. GT 700 C
POREBA
09537
CNC Fagor
Spindle diameter 400 mm
Length 1.800 mm
Bar passaging 127 mm
Tool holder turret with 12...
09537
CNC Fagor
Spindle diameter 400 mm
Length 1.800 mm
Bar passaging 127 mm
Tool holder turret with 12...
LATHE KIA TURN 21 LMS
POREBA
08070
LIVE TOOLS
CNC MITSUBISHI MELDAS M520AL
WORKING CAPACITY:
-Swing diameter on the bed mm 550
-Max...
08070
LIVE TOOLS
CNC MITSUBISHI MELDAS M520AL
WORKING CAPACITY:
-Swing diameter on the bed mm 550
-Max...
X
Invia tramite e-mail
X
Scarica PDF
Enter your email address to receive a link to download the PDF
Per poter procedere, la prima volta devi inserire i Tuoi dati