LATHE CNC CAMU MM 10.000
CAMU - AEPI
09377
CNC FAGOR 8055
DOUBLE RAM
Turning Left Ram
ISO 50 right Ram
C-AXIS
Turning diameter mm from 3000 to 10.000
Turning height mm 5000
Cross stroke mm...
09377
CNC FAGOR 8055
DOUBLE RAM
Turning Left Ram
ISO 50 right Ram
C-AXIS
Turning diameter mm from 3000 to 10.000
Turning height mm 5000
Cross stroke mm...
.jpeg)
PRESS LOIRE SAFE 2000 TON
LOIRE SAFE
10139
HYDRAULIC PRESS LOIRE SAFE mod. EDIMC 2000
Adjustable maximum slide force Ton 200 to 2.000
No. 04 Cylinders
Net slide return force Ton 130
Maximum...
10139
HYDRAULIC PRESS LOIRE SAFE mod. EDIMC 2000
Adjustable maximum slide force Ton 200 to 2.000
No. 04 Cylinders
Net slide return force Ton 130
Maximum...
LATHE FAT TUR 1350 MN x 8000
FAT
08638
FLAT BED AUTOMATIC
CAPACITY
Distance between centre mm 8000
Swing over bed mm 1550
Swing over carriage mm 1300
Max. load between centre kg 20.000...
08638
FLAT BED AUTOMATIC
CAPACITY
Distance between centre mm 8000
Swing over bed mm 1550
Swing over carriage mm 1300
Max. load between centre kg 20.000...
.JPG)
DEEP HOLE DRILLING IMSA MF 2000 BB
IMSA
10171
CNC control Heidenhain 530
Drilling depth (V) 2.000 mm
Longitudinal travel (X) 3.250 mm
Vertical travel (Y) 1.500 mm
Transversal (Z) tapping axis 500...
10171
CNC control Heidenhain 530
Drilling depth (V) 2.000 mm
Longitudinal travel (X) 3.250 mm
Vertical travel (Y) 1.500 mm
Transversal (Z) tapping axis 500...
FLOOR TYPE EMCO MECOF MASTERMILL-HPC3
MECOF
10158
Numerical control Heidenhain iTNC 530
X-axis mm 4.000
Z-axis (vertical) mm 3.000
Y-axis (cross) mm 1.600
Rapid traverse mm/min 30.000
Rotary tilting...
10158
Numerical control Heidenhain iTNC 530
X-axis mm 4.000
Z-axis (vertical) mm 3.000
Y-axis (cross) mm 1.600
Rapid traverse mm/min 30.000
Rotary tilting...
FLOOR TYPE MILLING MACHINE FPT VERUS
FPT
10173
CNC Heidenhain TNC 530 + remote handwheel HR510
AXIS TRAVELS:
X-axis 6.000 mm
Y-axis 1.500 mm
Z-axis 2.500 mm
Rapid feedrates 30.000...
10173
CNC Heidenhain TNC 530 + remote handwheel HR510
AXIS TRAVELS:
X-axis 6.000 mm
Y-axis 1.500 mm
Z-axis 2.500 mm
Rapid feedrates 30.000...
.jpeg)
MILLING PORTAL GANTRY WALDRICH COBURG
WALDRICH COBURG
09391
MULTITECH 3500 FT
PORTAL WITH MOVABLE CROSSRAIL
-Numeric Control Siemens Sinumerik 840 D
-Tables (No.2):
Width mm 3000
Lenght front table mm...
09391
MULTITECH 3500 FT
PORTAL WITH MOVABLE CROSSRAIL
-Numeric Control Siemens Sinumerik 840 D
-Tables (No.2):
Width mm 3000
Lenght front table mm...
BURKHARDT + WEBER MOD. MCX 1200
09964
4-AXIS HORIZONTAL MACHINE WITH CONTINUOUS 4 PALLETS
CNC CONTROL: Siemens 840D
X-AXIS TRAVEL: 2.800 mm
Y-AXIS TRAVEL: 2.200 mm
Z-AXIS TRAVEL: 2.100...
4-AXIS HORIZONTAL MACHINE WITH CONTINUOUS 4 PALLETS
CNC CONTROL: Siemens 840D
X-AXIS TRAVEL: 2.800 mm
Y-AXIS TRAVEL: 2.200 mm
Z-AXIS TRAVEL: 2.100...
MILLING JOBS MOD. THOR 100
JOBS
09418
CNC Heidenhain TNC530 HSCI with handwheel HR 410
X-axis stroke mm 4000
Y-axis stroke mm 2500
Z axis stroke mm 1500
X,Y,Z axis max speed m/min...
09418
CNC Heidenhain TNC530 HSCI with handwheel HR 410
X-axis stroke mm 4000
Y-axis stroke mm 2500
Z axis stroke mm 1500
X,Y,Z axis max speed m/min...
.jpeg)
PRESS FAVOLE 1000 TON
FAVOLE
10138
OLEODIDAMIC PRESS FAVOLE mod. DM 1000/250T
Adjustable nominal force 1.000 Ton
Nominal return force 180 Ton
Maximum blank holder reaction force 250...
10138
OLEODIDAMIC PRESS FAVOLE mod. DM 1000/250T
Adjustable nominal force 1.000 Ton
Nominal return force 180 Ton
Maximum blank holder reaction force 250...
LATHE VICTOR MOD. V1000C
VICTOR
09025
VERTICAL WITH LIVE TOOLS
Strokes:
Max swing diameter 1100 mm
Max turning height 825 mm
Max turning diameter 1000 mm
Axis X 500+40 mm
Axis Z 850...
09025
VERTICAL WITH LIVE TOOLS
Strokes:
Max swing diameter 1100 mm
Max turning height 825 mm
Max turning diameter 1000 mm
Axis X 500+40 mm
Axis Z 850...
MILLING MAUT MOD. PM3
MAUT
09200
CNC HEIDENHAIN TNC 530
AXIS STROKES:
Longitudinal stroke X axis 7000 mm
Vertical travel Z axis 1500 mm
Cross travel Y axis 3600 mm
WORK...
09200
CNC HEIDENHAIN TNC 530
AXIS STROKES:
Longitudinal stroke X axis 7000 mm
Vertical travel Z axis 1500 mm
Cross travel Y axis 3600 mm
WORK...
VERTICAL MACHINING CENTER ZPS MCV 2080I
ZPS
10392
VERTICAL MACHINING CENTER ZPS mod. MCV 2080i
Numerical control Heidenhain TNC 640
X-axis 2.100 mm
Y-axis 840 mm
Z-axis 840 mm
Maximum work feeds...
10392
VERTICAL MACHINING CENTER ZPS mod. MCV 2080i
Numerical control Heidenhain TNC 640
X-axis 2.100 mm
Y-axis 840 mm
Z-axis 840 mm
Maximum work feeds...
VERTICAL LATHE RADAR MOD- RAL-20M
RADAR
09902
C AXIS and LIVE TOOLS
CNC FANUC Oi-TD
CAPACITY:
Table diameter mm 2000
Max swing diameter mm 2500
Max turning diameter mm 2400
Distance from RAM to...
09902
C AXIS and LIVE TOOLS
CNC FANUC Oi-TD
CAPACITY:
Table diameter mm 2000
Max swing diameter mm 2500
Max turning diameter mm 2400
Distance from RAM to...
DEEP HOLE DRILLING IMSA MOD. MF 1100BBLL 6P
IMSA
09970
Maximum drilling depth in single cycle - V axis: 1.000 mm
Column, longitudinal movement - X axis: 1.250 mm
Drilling slide, vertical movement - Y...
09970
Maximum drilling depth in single cycle - V axis: 1.000 mm
Column, longitudinal movement - X axis: 1.250 mm
Drilling slide, vertical movement - Y...
VERTICAL MACHINING CENTER ZPS MCV 1680I
ZPS
10391
VERTICAL MACHINING CENTER ZPS mod. MCV 1680i
Numerical control Heidenhain TNC 640
X-axis 1.700 mm
Y-axis 840 mm
Z-axis 840 mm
Maximum work feeds...
10391
VERTICAL MACHINING CENTER ZPS mod. MCV 1680i
Numerical control Heidenhain TNC 640
X-axis 1.700 mm
Y-axis 840 mm
Z-axis 840 mm
Maximum work feeds...
LATHE MORANDO SR26 1300x7000
MORANDO
10124
Center height mm 1.300
Swing over bed mm 2.615
Swing over carriage mm 2.240
Faceplate diameter mm 1.700
Spindle bore diameter mm 100
Bed width mm...
10124
Center height mm 1.300
Swing over bed mm 2.615
Swing over carriage mm 2.240
Faceplate diameter mm 1.700
Spindle bore diameter mm 100
Bed width mm...
.jpeg)
BORING/MILLING TIGER TMT 5RT
TIGER
09724
TMT 5 RT 3000
ROTARY TABLE
CNC SELCA 4045PD
TABLE
Table 1.200 x 1.500 mm
N.7 T-slots 22 mm
Distance between T-slots 160 mm
Maximum weight allowed on...
09724
TMT 5 RT 3000
ROTARY TABLE
CNC SELCA 4045PD
TABLE
Table 1.200 x 1.500 mm
N.7 T-slots 22 mm
Distance between T-slots 160 mm
Maximum weight allowed on...
.JPG)
CNC MILLING FPT RONIN
FPT
10133
FLOOR TYPE MILLING MACHINE FPT mod. RONIN M60
Numerical control SELCA 4045
X-Axis Mm 6.000
Y-Axis Mm 1.250
Z-Axis Mm 2.000
Rapid Feed Rate Mm/Min...
10133
FLOOR TYPE MILLING MACHINE FPT mod. RONIN M60
Numerical control SELCA 4045
X-Axis Mm 6.000
Y-Axis Mm 1.250
Z-Axis Mm 2.000
Rapid Feed Rate Mm/Min...
.JPG)
GRINDING FAVRETTO MOD. ME 600
FAVRETTO
10070
CNC SIEMENS SINUMERIK
WORKING CAPACITY:
Max length 6000 mm
Max width 1100 mm
Max height 700 mm
WHEEL HOLDER HEAD:
Power HP/kW 40/30
Grinding wheel...
10070
CNC SIEMENS SINUMERIK
WORKING CAPACITY:
Max length 6000 mm
Max width 1100 mm
Max height 700 mm
WHEEL HOLDER HEAD:
Power HP/kW 40/30
Grinding wheel...
PRESS GIGANT G2-800/2 EXPORT
GIGANT
09022
Total press power 800 + 350 tons
Pistons: n.2 tons 800
Return power ton 100
Mobile table stroke or piston 1000 mm
Max pressure Bar 250
Pump l/mn...
09022
Total press power 800 + 350 tons
Pistons: n.2 tons 800
Return power ton 100
Mobile table stroke or piston 1000 mm
Max pressure Bar 250
Pump l/mn...
LATHE NILES-SIMMONS MOD. N50 UC
NILES-SIMMONS
09529
MULTITASKING
Siemens 840 CNC
Diameter on the bench 940 mm
Turning diameter over the entire length 900 mm
Distance between centers 5200 mm
AXIS...
09529
MULTITASKING
Siemens 840 CNC
Diameter on the bench 940 mm
Turning diameter over the entire length 900 mm
Distance between centers 5200 mm
AXIS...
.jpeg)
T-TYPE BORING COLGAR
COLGAR
08787
MOD. PROGRAM 213 TR 12
CNC SIEMENS 840D Powerline
TECHNICAL DATA
WORK AREA:
X axis - longitudinal stroke of the table 3,500 mm
Y axis - Vertical...
08787
MOD. PROGRAM 213 TR 12
CNC SIEMENS 840D Powerline
TECHNICAL DATA
WORK AREA:
X axis - longitudinal stroke of the table 3,500 mm
Y axis - Vertical...
VERTICAL STORAGE ICAM
ICAM
10172
ICAM MOD. SILO2
No. Trays 128
Average useful tray loading height 125 mm
Tray pitch positioning 150 mm
Internal tray dimensions W 1953 mm D 802 mm H...
10172
ICAM MOD. SILO2
No. Trays 128
Average useful tray loading height 125 mm
Tray pitch positioning 150 mm
Internal tray dimensions W 1953 mm D 802 mm H...
MILLING FAGIMA MOD. KS3000
FAGIMA
08194
CNC FANUC series 31
Axis X mm 3000
Axis Y mm 1250
Axis Z mm 2000
Rapid feedrates X,Y,Z mm/min 30.000
Spindle speed rpm 30-5000
Spindle power S1/S6 kW...
08194
CNC FANUC series 31
Axis X mm 3000
Axis Y mm 1250
Axis Z mm 2000
Rapid feedrates X,Y,Z mm/min 30.000
Spindle speed rpm 30-5000
Spindle power S1/S6 kW...
VERTICAL MACHINING CENTER ZPS MCV 1260I
ZPS
10390
VERTICAL MACHINING CENTER ZPS mod. MCV 1260i
Numerical control Heidenhain TNC 640
X-axis 1.300 mm
Y-axis 640 mm
Z-axis 800 mm
Maximum work feeds...
10390
VERTICAL MACHINING CENTER ZPS mod. MCV 1260i
Numerical control Heidenhain TNC 640
X-axis 1.300 mm
Y-axis 640 mm
Z-axis 800 mm
Maximum work feeds...
VERTICAL MACHINING CENTER ZPS MCV 1060I
ZPS
10389
VERTICAL MACHINING CENTER ZPS mod. MCV 1060i
Numerical control Heidenhain TNC 640
X-axis 1.050 mm
Y-axis 640 mm
Z-axis 800 mm
Maximum work feeds...
10389
VERTICAL MACHINING CENTER ZPS mod. MCV 1060i
Numerical control Heidenhain TNC 640
X-axis 1.050 mm
Y-axis 640 mm
Z-axis 800 mm
Maximum work feeds...
.jpeg)
TEST MOLDING PRESS TCS 300 TON
TCS
10164
Clamping force 300 ton
Opening force 100 ton
Operating pressure 250 bar
Platen overall dimensions 3,500 x 2,500 mm
Minimum mold size (at max....
10164
Clamping force 300 ton
Opening force 100 ton
Operating pressure 250 bar
Platen overall dimensions 3,500 x 2,500 mm
Minimum mold size (at max....
LATHE TITAN MOD. D33 CNC
TITAN
05993
CNC ECS 2400
N°02 vertical carriage
Platform diameter mm.3000
Max working diameter mm.3160
Min diameter internal working mm.400
Max height working...
05993
CNC ECS 2400
N°02 vertical carriage
Platform diameter mm.3000
Max working diameter mm.3160
Min diameter internal working mm.400
Max height working...
CENTER TOYODA MOD. FH 800 SX
TOYODA
08839
CNC FANUC 31i
WORKING AREA:
Axis X stroke mm 1250
Axis Y stroke mm 1100
Axis Z stroke mm 1050
Distance from spindle nose to table center mm...
08839
CNC FANUC 31i
WORKING AREA:
Axis X stroke mm 1250
Axis Y stroke mm 1100
Axis Z stroke mm 1050
Distance from spindle nose to table center mm...
CNC ROTARY TABLE UMARO
UMARO
05791
MOD. MDR 3030/40/4500
MAX WEIGHT ON CENTER TABLE TON.40
TABLE DIMENSIONS MM.3000x3000
LONGITUDINAL STROKE (AXIS V) MM.4350
RAPID FEED SPEED IN...
05791
MOD. MDR 3030/40/4500
MAX WEIGHT ON CENTER TABLE TON.40
TABLE DIMENSIONS MM.3000x3000
LONGITUDINAL STROKE (AXIS V) MM.4350
RAPID FEED SPEED IN...
FAT TUR CNC LATHE 710X3000
FAT
10397
FAT TUR CNC LATHE mod. 710 X 3.000
Numerical control Siemens Sinumerik One
Distance between centers mm 3.000
Swing over bed mm 710
Swing over cross...
10397
FAT TUR CNC LATHE mod. 710 X 3.000
Numerical control Siemens Sinumerik One
Distance between centers mm 3.000
Swing over bed mm 710
Swing over cross...
.jpeg)
LATHE SAMU-TITAN RST 32 CNC
SAMU-TITAN
09411
VERTICAL
CNC SIMENS SINUMERIK
Max turning diameter mm 3300
Table diameter mm 3000
Max load capacity Kg 18000
Max working height mm 2170
Ram stroke...
09411
VERTICAL
CNC SIMENS SINUMERIK
Max turning diameter mm 3300
Table diameter mm 3000
Max load capacity Kg 18000
Max working height mm 2170
Ram stroke...
.jpeg)
BORING TOS VARNSDORF
TOS VARNSDORF
08747
MOD. WHN 13 CNC
CNC HEIDENHAIN TNC 426
STROKES:
-Axis X stroke mm 3500
-Axis Y stroke mm 2000
-Axis Z stroke mm 1250
-Axis W stroke mm...
08747
MOD. WHN 13 CNC
CNC HEIDENHAIN TNC 426
STROKES:
-Axis X stroke mm 3500
-Axis Y stroke mm 2000
-Axis Z stroke mm 1250
-Axis W stroke mm...
FLOOR TYPE MILLING SORALUCE SP 8000
SORALUCE
09262
CNC SELCA S3045
STROKES:
Longitudinal stroke X axis 6500 mm
Vertical stroke Y axis 2000 mm
Z axis ram stroke 1200 mm
TABLE:
Table length 8000...
09262
CNC SELCA S3045
STROKES:
Longitudinal stroke X axis 6500 mm
Vertical stroke Y axis 2000 mm
Z axis ram stroke 1200 mm
TABLE:
Table length 8000...
MILLING MECOF MOD. CS 1040
MECOF
09531
FLOOR TYPE
CNC D-ELECTRON Z32
Longitudinal stroke axis X mm 8300
Cross stroke axis Y mm 1000
Vertical stroke axis Z mm 1900
Table dimensions mm...
09531
FLOOR TYPE
CNC D-ELECTRON Z32
Longitudinal stroke axis X mm 8300
Cross stroke axis Y mm 1000
Vertical stroke axis Z mm 1900
Table dimensions mm...
.JPG)
SPARK ERODER ONA 2 HEADS TX10 C2
ONA
10166
X-axis travel (total/individual) mm 3.000/2.000
Y-axis travel mm 1.500
Z-axis travel mm 1.000
C-axis travel 360°
Work tank dimensions mm 4.000 x...
10166
X-axis travel (total/individual) mm 3.000/2.000
Y-axis travel mm 1.500
Z-axis travel mm 1.000
C-axis travel 360°
Work tank dimensions mm 4.000 x...
FAT TUR CNC LATHE MN 630X2000
FAT
10396
FAT TUR CNC LATHE mod. 630 X 2.000
Numerical control Siemens Sinumerik One
Distance between centers mm 2.000
Swing over bed mm 630
Swing over cross...
10396
FAT TUR CNC LATHE mod. 630 X 2.000
Numerical control Siemens Sinumerik One
Distance between centers mm 2.000
Swing over bed mm 630
Swing over cross...
BENDING ROLL 4 ROLLS LVD 3050x60
LVD
09376
HYDRAULIC
Working lenght mm 3050
Thickness mm 60
Diameter superior roll mm 660
Diameter inferioror roll mm 660
Diameter lateral rolls mm 525
Lower...
09376
HYDRAULIC
Working lenght mm 3050
Thickness mm 60
Diameter superior roll mm 660
Diameter inferioror roll mm 660
Diameter lateral rolls mm 525
Lower...
BORING PEGARD PRECIRAM 2
PEGARD
08898
CNC SIEMENS 840D
Quill diameter mm 160
Quill taper ISO 50
Quill stroke 700 mm
Spindle motor power kW 70
Rotation speed rpm 1600
RAM stroke mm...
08898
CNC SIEMENS 840D
Quill diameter mm 160
Quill taper ISO 50
Quill stroke 700 mm
Spindle motor power kW 70
Rotation speed rpm 1600
RAM stroke mm...
BORING SAN ROCCO 110 FMC 110/S-MMZ
SAN ROCCO
07749
CNC ECS 4801
Axis X 3100 mm
Axis Y 2000 mm
Axis Z 1600 + 600 mm at the table center
Axis W (spindle stroke) 600 mm
Axis B (Rotary table)...
07749
CNC ECS 4801
Axis X 3100 mm
Axis Y 2000 mm
Axis Z 1600 + 600 mm at the table center
Axis W (spindle stroke) 600 mm
Axis B (Rotary table)...
CENTER QUASER MOD. HX850A/HT
QUASER
09399
CNC FANUC 18i-MB
CAPACITY:
Pallet dimensions mm800x800
Max swing diameter mm 1200
Max work piece height mm 1100
Table load kg 1500
Axis X stroke mm...
09399
CNC FANUC 18i-MB
CAPACITY:
Pallet dimensions mm800x800
Max swing diameter mm 1200
Max work piece height mm 1100
Table load kg 1500
Axis X stroke mm...
GRINDING GIORIA RU/S 4000 CNC
GIORIA
07432
CNC Siemens sinumerik 820T
Max swing diameter mm 595
Max grinding diameter 590 mm
Max grinding length 4000 mm
Max weight admitted between centers Kg...
07432
CNC Siemens sinumerik 820T
Max swing diameter mm 595
Max grinding diameter 590 mm
Max grinding length 4000 mm
Max weight admitted between centers Kg...
MILLING IM PARPAS ML90/6000
PARPAS
08889
Numeric Control DELECTRON AZ102
Longitudinal travel mm 6000
Vertical travel mm 2000
Cross travel mm 1000
Spindle motor Brushless kW 22
Max torque Nm...
08889
Numeric Control DELECTRON AZ102
Longitudinal travel mm 6000
Vertical travel mm 2000
Cross travel mm 1000
Spindle motor Brushless kW 22
Max torque Nm...
SCREW MILLING MACHINE SAPORITI
SAPORITI
07393
MOD. L 560 E S DOPPIA A CNC
WITH DOUBLE HEAD (FOR HIGH PRODUCTION OF SCREW)
7 AXIS
CNC AUTOMATA
Center height mm 510
Center distance mm 5200
Max...
07393
MOD. L 560 E S DOPPIA A CNC
WITH DOUBLE HEAD (FOR HIGH PRODUCTION OF SCREW)
7 AXIS
CNC AUTOMATA
Center height mm 510
Center distance mm 5200
Max...
T-TYPE BORING TOS VARNSDORF
TOS VARNSDORF
09189
MOD. WHN 110 MC
PALLET CHANGE
CNC ECS 2700 D
Longitudinal X axis stroke 2000 mm
Vertical Y axis stroke 1400 mm
W axis stroke 1250 mm
Quill Z axis...
09189
MOD. WHN 110 MC
PALLET CHANGE
CNC ECS 2700 D
Longitudinal X axis stroke 2000 mm
Vertical Y axis stroke 1400 mm
W axis stroke 1250 mm
Quill Z axis...
.jpeg)
MILLING MECOF AGILE 3.3
MECOF
10186
CNC FIDIA C 20/XPOWER
Transverse travel 8,000 mm
Vertical travel 1,850 mm
RAM travel 1,250 mm
ISO 50 spindle taper
Spindle motor power 30 Kw
41-place...
10186
CNC FIDIA C 20/XPOWER
Transverse travel 8,000 mm
Vertical travel 1,850 mm
RAM travel 1,250 mm
ISO 50 spindle taper
Spindle motor power 30 Kw
41-place...
CENTER MAKINO A77
MAKINO
08962
CNC FANUC
GENERAL DATA:
X-axis stroke mm 800
Y-axis stroke mm 750
Distance table top - spindle axis mm 100-850
Z-axis stroke mm 770
Cross distance...
08962
CNC FANUC
GENERAL DATA:
X-axis stroke mm 800
Y-axis stroke mm 750
Distance table top - spindle axis mm 100-850
Z-axis stroke mm 770
Cross distance...
.jpeg)
HORIZONTAL MACHINING CENTER DOOSAN NHP5000
DOOSAN
10093
Numerical control Fanuc 31i-B Plus
X-axis 730 mm
Y-axis 730 mm
Z-axis 880 mm
Rapid feed rate 60 m/min
Work feed rate 30 m/min
Continuous Table...
10093
Numerical control Fanuc 31i-B Plus
X-axis 730 mm
Y-axis 730 mm
Z-axis 880 mm
Rapid feed rate 60 m/min
Work feed rate 30 m/min
Continuous Table...
.jpeg)
MILLING FPT MOD. RAID XL
FPT
09205
WITH FIXED PORTAL
CNC Heidenhain TNC530I S.P.
WORKING AREA:
Longitudinal travel X mm 2000
Cross travel Y mm 1400
Vertical travel Z mm 800
Table...
09205
WITH FIXED PORTAL
CNC Heidenhain TNC530I S.P.
WORKING AREA:
Longitudinal travel X mm 2000
Cross travel Y mm 1400
Vertical travel Z mm 800
Table...
MILLING NOVAR PROTEA 5000
NOVAR
08785
CNC SELCA 3045
TABLE:
Table dimensions mm 5000x1000
T-slots number 7
T-slots width mm 22
T-slots distance mm 150
Table load Kg 10.000
AXIS...
08785
CNC SELCA 3045
TABLE:
Table dimensions mm 5000x1000
T-slots number 7
T-slots width mm 22
T-slots distance mm 150
Table load Kg 10.000
AXIS...
.jpeg)
MOLD TEST PRESS TCS 200 TON
TCS
10163
Clamping force 200 ton
Opening force 85 ton
Sliding table dimensions 3.000 x 2.300 mm
Table stroke 2.320 mm
Max weight on sliding table 60 ton
Max...
10163
Clamping force 200 ton
Opening force 85 ton
Sliding table dimensions 3.000 x 2.300 mm
Table stroke 2.320 mm
Max weight on sliding table 60 ton
Max...
VERTICAL MACHINING CENTRE EUMACH MOD. HSM 1000 L / 10.000RPM
EUMACH
08223
CNC Fanuc 0i-MF
TECHNICAL DETAILS
- x axis 1020 mm
- y axis 610 mm
- z axis 610 mm
- Distance spindle nose to table surface 77-687 mm
- Distance...
08223
CNC Fanuc 0i-MF
TECHNICAL DETAILS
- x axis 1020 mm
- y axis 610 mm
- z axis 610 mm
- Distance spindle nose to table surface 77-687 mm
- Distance...
N.2 VERTICAL LATHE EMAG VSC 400 B
EMAG
09404
CNC SIEMENS 840 C
Max turning diameter mm 420
Max turning height mm 315
Axis X stroke mm 835
Axis Z stroke mm 315
Spindle speed rpm 4000
Spindle...
09404
CNC SIEMENS 840 C
Max turning diameter mm 420
Max turning height mm 315
Axis X stroke mm 835
Axis Z stroke mm 315
Spindle speed rpm 4000
Spindle...
PRESS ROVETTA 400TON
ROVETTA
09942
MECHANICAL DOUBLE COLUMN PRESSES
S2-400-1600 × 1220 / E
Nominal force: kN 4000
Slide stroke: 300 mm
Strokes per min .: N ° 18
Worktop dimensions:...
09942
MECHANICAL DOUBLE COLUMN PRESSES
S2-400-1600 × 1220 / E
Nominal force: kN 4000
Slide stroke: 300 mm
Strokes per min .: N ° 18
Worktop dimensions:...
.JPG)
FIDIA 5 AXIS CENTER KR 214
FIDIA
10182
NUMERICAL CONTROL Fidia C20
X-axis travel 2.700 mm
Y-axis travel 1.100 mm
Z-axis travel 1.400 mm
Max. feed rate on X-Y-Z axes 24 m/min
5-axis head...
10182
NUMERICAL CONTROL Fidia C20
X-axis travel 2.700 mm
Y-axis travel 1.100 mm
Z-axis travel 1.400 mm
Max. feed rate on X-Y-Z axes 24 m/min
5-axis head...
.JPG)
DEEP HOLE DRILLING MACHINE HETO
HETO
09462
2000 POWER
CNC FAGOR 8055 + handwheel Selbox
STROKES:
Axis X stroke mm 2000
Axis Y stroke mm 1200
Axis Z stroke mm 850
Axis W stroke mm...
09462
2000 POWER
CNC FAGOR 8055 + handwheel Selbox
STROKES:
Axis X stroke mm 2000
Axis Y stroke mm 1200
Axis Z stroke mm 850
Axis W stroke mm...
.JPG)
DEEP HOLE DRILLING MACHINE IMSA MOD. MF 1000 BB
IMSA
10161
CNC Selca S4040D
Drilling depth transverse movement axis V 1.000 mm
Column longitudinal movement axis X 1.650 mm
Drilling slide vertical movement...
10161
CNC Selca S4040D
Drilling depth transverse movement axis V 1.000 mm
Column longitudinal movement axis X 1.650 mm
Drilling slide vertical movement...
HORIZONTAL CENTER
LINEA
09193
LINEA SPAZIO 20 METRO
7 PALLET
CNC GE FANUC serie 16-M
STROKES_
Axis X stroke mm 1150
Axis Y stroke mm 850
Axis Z stroke mm 910
SPINDLE:
Spindle...
09193
LINEA SPAZIO 20 METRO
7 PALLET
CNC GE FANUC serie 16-M
STROKES_
Axis X stroke mm 1150
Axis Y stroke mm 850
Axis Z stroke mm 910
SPINDLE:
Spindle...
.JPG)
LATHE IMT MOD. S32 TM2
IMT
08629
CNC FANUC 18iT
AXIS C
LIVE TOOLS
ROTOPALLET
CAPACITY:
Max swing diameter 800 mm
Max turning diameter 650 mm
LATHE SPINDLE:
Max spindle speed 1800...
08629
CNC FANUC 18iT
AXIS C
LIVE TOOLS
ROTOPALLET
CAPACITY:
Max swing diameter 800 mm
Max turning diameter 650 mm
LATHE SPINDLE:
Max spindle speed 1800...
MILLING COLGAR MOD. PROGRAM
COLGAR
08249
CONTROLLO NUMERICO ECS 4801
Axis X longitudinal mm 8000
Axis Y vertical mm 2000
Axis Z cross mm 1000
Spindle speed max rpm 1200
Total installed...
08249
CONTROLLO NUMERICO ECS 4801
Axis X longitudinal mm 8000
Axis Y vertical mm 2000
Axis Z cross mm 1000
Spindle speed max rpm 1200
Total installed...
MILLING SACHMAN MOD. T22
SACHMAN
09664
BED TYPE
CNC SELCA 3045
STROKES:
X axis longitudinal stroke 2500 mm
Y axis transversal stroke 1400 mm
Z axis vertical stroke 1200...
09664
BED TYPE
CNC SELCA 3045
STROKES:
X axis longitudinal stroke 2500 mm
Y axis transversal stroke 1400 mm
Z axis vertical stroke 1200...
MILLUTENSIL PRESS MIL 203
MILLUTENSIL
09666
Useful platen length 2000 mm
Useful platen width 1500 mm
Max passage between columns on length 2130 mm
Max passage between columns on width 1630...
09666
Useful platen length 2000 mm
Useful platen width 1500 mm
Max passage between columns on length 2130 mm
Max passage between columns on width 1630...
SHARPENING/GRINDING MACHINE ZARO 5-AXIS
ZARO
10381
MOD. LINDA POWER 1500
NUMERICAL CONTROL NUM 1050 AXIUM POWER
GENERAL DESCRIPTION:
1.1. CONTROLLED AXES
-X-axis: longitudinal table, travel 1500...
10381
MOD. LINDA POWER 1500
NUMERICAL CONTROL NUM 1050 AXIUM POWER
GENERAL DESCRIPTION:
1.1. CONTROLLED AXES
-X-axis: longitudinal table, travel 1500...
.JPG)
SPARK ERODER ONA QX7
ONA
10167
X-axis travel mm 1.500
Y-axis travel mm 750
Tank dimensions mm 2.300 x 1.300 x 850
Table dimensions mm 1.700 x 1.000
Table load capacity kg...
10167
X-axis travel mm 1.500
Y-axis travel mm 750
Tank dimensions mm 2.300 x 1.300 x 850
Table dimensions mm 1.700 x 1.000
Table load capacity kg...
CENTER OKK HM630
OKK
09302
CNC FANUC 310is-Model A
ROTOPALLET
LINEAR AXES
Axis X stroke mm 1050
Axis Y stroke mm 900
Axis X stroke mm 900
Rapid feed rates XYZ m/min 54...
09302
CNC FANUC 310is-Model A
ROTOPALLET
LINEAR AXES
Axis X stroke mm 1050
Axis Y stroke mm 900
Axis X stroke mm 900
Rapid feed rates XYZ m/min 54...
CNC FAGOR 8055 M
CERUTI
07202
digital readut
• X AXIS (sx-dx tavola)
· Useful stroke: 2300 mm
· Max rapid speed (G00): 1200 mm/min
· Direction +: to the left
· Direction -:...
07202
digital readut
• X AXIS (sx-dx tavola)
· Useful stroke: 2300 mm
· Max rapid speed (G00): 1200 mm/min
· Direction +: to the left
· Direction -:...
DEEP HOLE DRILLING IMSA MOD. MF 1500 B2
IMSA
08412
CNC SELCA 3045 + remote handwheel
ROTARY TABLE
Working surface mm 1200x1500
T-slots (quantity x width ) mm 6 x 22
Max allowable load in rotation Kg...
08412
CNC SELCA 3045 + remote handwheel
ROTARY TABLE
Working surface mm 1200x1500
T-slots (quantity x width ) mm 6 x 22
Max allowable load in rotation Kg...
LASER TRUMPF TCL 3050
TRUMPF
08168
Laser power 6000 W CO/2
Working size mm 3000x1500
Maximum material thicknesses:
-Construction steel (oxygen) 25 mm
-Construction steel (high pressure...
08168
Laser power 6000 W CO/2
Working size mm 3000x1500
Maximum material thicknesses:
-Construction steel (oxygen) 25 mm
-Construction steel (high pressure...
LATHE MAZAK INTEGREX 300II SY
MAZAK
09379
AXIS Y
SPINDLE/SUB-SPINDLE
LIVE TOOLS
CNC Mazatrol Fusion 640 MT
CAPACITY:
Max swing diameter mm 610
Max working diameter mm 610
Max working length...
09379
AXIS Y
SPINDLE/SUB-SPINDLE
LIVE TOOLS
CNC Mazatrol Fusion 640 MT
CAPACITY:
Max swing diameter mm 610
Max working diameter mm 610
Max working length...
LATHE UTITA MOD. T 500/CN
UTITA
05949
CNC FAS Z16
Turning diameter mm.800 over bed, mm.550x6200 over carriage
Lenght mm.6200
Height of center mm.450
Bar passaging mm.80
Spindle taper ASA...
05949
CNC FAS Z16
Turning diameter mm.800 over bed, mm.550x6200 over carriage
Lenght mm.6200
Height of center mm.450
Bar passaging mm.80
Spindle taper ASA...
MILLING TOS KURIM FSQ 100
TOS KURIM
09198
MOD. FSQ 100 OR/A3
CNC HEIDENHAIN TNC 426 M
Table surface 3000x1000 mm
Max workpiece weight Kg 7000
Number of T-slots mm 7x140
Central T-slot width...
09198
MOD. FSQ 100 OR/A3
CNC HEIDENHAIN TNC 426 M
Table surface 3000x1000 mm
Max workpiece weight Kg 7000
Number of T-slots mm 7x140
Central T-slot width...
.jpeg)
PRESS MOSSINI 400 TON
MOSSINI
10140
OLEODINAMIC PRESS MOSSINI mod. PO/2M 400
Working power adjustable Ton from 40 to 400
Return power Ton 40
Pressure cylinders n° 2
Table dimensions...
10140
OLEODINAMIC PRESS MOSSINI mod. PO/2M 400
Working power adjustable Ton from 40 to 400
Return power Ton 40
Pressure cylinders n° 2
Table dimensions...
PRESS OMERA 250 T
OMERA
07581
MECHANICAL DOUBLE COLUMN
OPM2-250
Power 250 T
Working table mm 2200x1200
Strokes/min n. 24
Max stroke mm 300
Adjustable stroke mm 150
Distance...
07581
MECHANICAL DOUBLE COLUMN
OPM2-250
Power 250 T
Working table mm 2200x1200
Strokes/min n. 24
Max stroke mm 300
Adjustable stroke mm 150
Distance...
PRESS WARCOM OPERA 350-40
WARCOM
10279
CNC DELEM DA-69W
8 CONTROLLED AXES
Max working force Ton. 350
Useful bending length 4100 mm
Passage between the uprights 3550 mm
Gap depth 500...
10279
CNC DELEM DA-69W
8 CONTROLLED AXES
Max working force Ton. 350
Useful bending length 4100 mm
Passage between the uprights 3550 mm
Gap depth 500...
VERTICAL LATHE O-MMOD. VT5-20N
O-M
07829
CNC FANUC 18-T
Diameter plateau 4 jaws mm 2000
Max Swing diameter mm 2500
Max turning diameter mm 2300
Max height crossrail-table mm 2050
Max...
07829
CNC FANUC 18-T
Diameter plateau 4 jaws mm 2000
Max Swing diameter mm 2500
Max turning diameter mm 2300
Max height crossrail-table mm 2050
Max...
.JPG)
LATHE MORI SEIKI NL2500SY/700
MORI SEIKI
09398
AXIS Y
COUNTER-SPINDLE
LIVE TOOLS
C-AXIS 0.001°
CNC MORI SEIKI MSX-850 III
CAPACITY:
Swing diameter over bed mm 923,8
Swing diameter over cross...
09398
AXIS Y
COUNTER-SPINDLE
LIVE TOOLS
C-AXIS 0.001°
CNC MORI SEIKI MSX-850 III
CAPACITY:
Swing diameter over bed mm 923,8
Swing diameter over cross...
CNC LATHE BOMAC AUTRONIC 2060NC
BOMAC
10358
255x1500
COMPOSITION AND TECHNICAL FEATURES flat bed lathe:
Heavy structure, extramely care for mechanical parts and electronical features.
HIGH...
10358
255x1500
COMPOSITION AND TECHNICAL FEATURES flat bed lathe:
Heavy structure, extramely care for mechanical parts and electronical features.
HIGH...
CENTER MIKRON UCP 800 DURO
MIKRON
09643
CNC Heidenhain iTNC 530
STROKES
X axis 800 mm
Y axis 650 mm
Z axis 500 mm
TILTING ROTARY TABLE:
Dimensions mm 600x600
Max piece weight 500 kg
Axis...
09643
CNC Heidenhain iTNC 530
STROKES
X axis 800 mm
Y axis 650 mm
Z axis 500 mm
TILTING ROTARY TABLE:
Dimensions mm 600x600
Max piece weight 500 kg
Axis...
DEEP HOLE DRILLING IMSA MOD. MF 800 C
IMSA
07366
CNC SELCA S4040D
ROTARY TABLE:
Working surface diam. mm 600
T-slots (quantityxwidth) mm 4x18
Max load Kg 2000
AXIS STROKES - WORKING...
07366
CNC SELCA S4040D
ROTARY TABLE:
Working surface diam. mm 600
T-slots (quantityxwidth) mm 4x18
Max load Kg 2000
AXIS STROKES - WORKING...
LATHE VIPER MOD. VT-36 BLMC
CNS
09281
CNC HORIZONTAL AXIS
LIVE TOOLS
TAILSTOCK
CNC FANUC 0iTD
WORKING AREA:
Max swing diameter on the bed mm 780
Max swing diameter on cross guides 610...
09281
CNC HORIZONTAL AXIS
LIVE TOOLS
TAILSTOCK
CNC FANUC 0iTD
WORKING AREA:
Max swing diameter on the bed mm 780
Max swing diameter on cross guides 610...
LATHE EST TICINO 420x6000
EST TICINO
07382
Height of center mm 420
Distance between center mm 6000
Swing over bed mm 840
Swing over carriage mm 520
EQUIPPED WITH:
3 jaws chuck diameter mm...
07382
Height of center mm 420
Distance between center mm 6000
Swing over bed mm 840
Swing over carriage mm 520
EQUIPPED WITH:
3 jaws chuck diameter mm...
LATHE SAFOP LEONARD 45
SAFOP
09532
4 GUIDEWAYS
LIVE TOOLS
C AXIS
CNC Siemens Sinumerik
Center height mm 450
Max. swing diameter mm 800
Max. turning diameter mm 600
Center distance mm...
09532
4 GUIDEWAYS
LIVE TOOLS
C AXIS
CNC Siemens Sinumerik
Center height mm 450
Max. swing diameter mm 800
Max. turning diameter mm 600
Center distance mm...
.jpeg)
PRESS MOSSINI 250 TON
MOSSINI
10141
OLEODINAMIC PRESS MOSSINI mod. PO/2M/P 250
Nominal force Ton 250
Slide stroke mm 1.000
Work table dimensions mm 2.500 x 2.000
Max workpiece...
10141
OLEODINAMIC PRESS MOSSINI mod. PO/2M/P 250
Nominal force Ton 250
Slide stroke mm 1.000
Work table dimensions mm 2.500 x 2.000
Max workpiece...
CENTER FAMUP EMCO
FAMUP EMCO
07790
MOD. MAXMILL 500
5 AXIS
CNC Siemens SINUMERIK 840D SL
WORKING RANGE:
Axis X stroke mm 650
Axis Y stroke mm 550
Axs Z stroke mm 500
Axis B +/- 100...
07790
MOD. MAXMILL 500
5 AXIS
CNC Siemens SINUMERIK 840D SL
WORKING RANGE:
Axis X stroke mm 650
Axis Y stroke mm 550
Axs Z stroke mm 500
Axis B +/- 100...
MILLING BOMAC FBL 1000 CNC
BOMAC
10409
BED TYPE
FAGOR 8058 ELITE CNC – 10.4" LCD monitor – SOFT 60 HD Graphics
TECHNICAL SPECIFICATIONS:
STROKES
-Longitudinal X mm 1000
-Cross Y mm...
10409
BED TYPE
FAGOR 8058 ELITE CNC – 10.4" LCD monitor – SOFT 60 HD Graphics
TECHNICAL SPECIFICATIONS:
STROKES
-Longitudinal X mm 1000
-Cross Y mm...
BORING TOS MOD. WHN 13A
TOS VARNSDORF
07541
CNC ECS 2400
Axis X mm 1965
Axis Y mm 2040
Axis Z mm 1230
Axis W mm 572
Spindle diameter mm 130
Table mm 1800 x 1800
Equipped with:
- Manual Head
-...
07541
CNC ECS 2400
Axis X mm 1965
Axis Y mm 2040
Axis Z mm 1230
Axis W mm 572
Spindle diameter mm 130
Table mm 1800 x 1800
Equipped with:
- Manual Head
-...
CENTER SPINNER MOD. MVC 1600-B
SPINNER
09845
Numerical control HEIDENHAIN 620
X-axis travel mm 1.600
Y-axis travel mm 800
Z-axis travel mm 700
Rapid traverse mm/min 18
Table dimensions mm 1.800...
09845
Numerical control HEIDENHAIN 620
X-axis travel mm 1.600
Y-axis travel mm 800
Z-axis travel mm 700
Rapid traverse mm/min 18
Table dimensions mm 1.800...
.jpeg)
LATHE OMG ZANOLETTI
OMG ZANOLETTI
09312
MOD. CNA 325x4000
CNC HEIDENHAIN MANUAL PLUS 620
Height of center mm 325
Lenght mm 4000
Wiidth bed mm 440
Turning diameter on the bed mm 650
Turning...
09312
MOD. CNA 325x4000
CNC HEIDENHAIN MANUAL PLUS 620
Height of center mm 325
Lenght mm 4000
Wiidth bed mm 440
Turning diameter on the bed mm 650
Turning...
LATHE RYAZAN PR 731 500x10000
RYAZAN
09177
Height of centre 500 mm
Distance between centre 10.000 mm
Swing over carriage 670 mm
Spindle rotation 5-500 rpm
Bar passaging 130 mm
Bed width 770...
09177
Height of centre 500 mm
Distance between centre 10.000 mm
Swing over carriage 670 mm
Spindle rotation 5-500 rpm
Bar passaging 130 mm
Bed width 770...
MILLING/DRILLING STEM
STEM
08882
DEEP DRILLING UNIT FOMAS FC2/00, max drilling depth 1500 mm
CNC SELCA 1200
X axis travel 3200 mm
Y axis travel 2100 mm
Milling ram stroke mm...
08882
DEEP DRILLING UNIT FOMAS FC2/00, max drilling depth 1500 mm
CNC SELCA 1200
X axis travel 3200 mm
Y axis travel 2100 mm
Milling ram stroke mm...
VERTICAL LATHE MORANDO KL 14
MORANDO
07391
CNC ICEM 402
Spindle diameter mm 1450
Turning diameter mm 1680
Max turning height mm 1100
Cross stroke mm 1000
RAM stroke mm 1100
Taper ISO...
07391
CNC ICEM 402
Spindle diameter mm 1450
Turning diameter mm 1680
Max turning height mm 1100
Cross stroke mm 1000
RAM stroke mm 1100
Taper ISO...
ERODER WIRE EXCETEK EDM V3280
EXCETEK EDM
08172
WITH CNC
Max piece dimensions mm 3500x3000x350
Max piece weight Kg 10000
X/Y axis strokes mm 3000x1420+1420 (due teste)
Z axis stroke mm 350
Thread...
08172
WITH CNC
Max piece dimensions mm 3500x3000x350
Max piece weight Kg 10000
X/Y axis strokes mm 3000x1420+1420 (due teste)
Z axis stroke mm 350
Thread...
ERODER WIRE SODICK SL 400Q
SODICK
09328
Max workpiece dimensions (wxdxh):
-mm 600x470x240 (flushing)
-mm 600x470x230 (submerged)
Max workpiece weight:
-500 kg (flushing)
-350 kg...
09328
Max workpiece dimensions (wxdxh):
-mm 600x470x240 (flushing)
-mm 600x470x230 (submerged)
Max workpiece weight:
-500 kg (flushing)
-350 kg...
LATHE SHENYANG SMTCL HTC80200
SHENYANG
08840
CNC FANUC Oi-TC + remote handwheel
Max swing diameter over bed mm 1000
Max turning length 2000 mm
Max turning diameter 800 mm
Max swing diameter over...
08840
CNC FANUC Oi-TC + remote handwheel
Max swing diameter over bed mm 1000
Max turning length 2000 mm
Max turning diameter 800 mm
Max swing diameter over...
MILLING PARAPAS MOD. SL75
PARPAS
09866
BED TYPE
CNC HEIDENHAIN 426
4 AXIS
TABLE:
Surface mm 2250x750
N.5 T-slots mm 18
Distance between T-slots mm 125
Max load Kg 4000
WORKING...
09866
BED TYPE
CNC HEIDENHAIN 426
4 AXIS
TABLE:
Surface mm 2250x750
N.5 T-slots mm 18
Distance between T-slots mm 125
Max load Kg 4000
WORKING...
BORING SAN ROCCO FUTURA 13/32MMT
SAN ROCCO
09190
CNC ECS 2301
STROKES:
X axis (longitudinal) stroke 3000 mm
Y axis (vertical) stroke 2500 mm
Z axis (column trasversal) stroke 1500...
09190
CNC ECS 2301
STROKES:
X axis (longitudinal) stroke 3000 mm
Y axis (vertical) stroke 2500 mm
Z axis (column trasversal) stroke 1500...
.JPG)
CENTER DAEWOO ACE MOD.HM800
DAEWOO
08534
CNC FANUC 18i-M
STROKES:
Axis X mm 1250
Axis Y mm 1000
Axis Z mm 1000
PALLET:
Pallet number 2
Pallet dimensions mm 800x800
Max pallet load Kg...
08534
CNC FANUC 18i-M
STROKES:
Axis X mm 1250
Axis Y mm 1000
Axis Z mm 1000
PALLET:
Pallet number 2
Pallet dimensions mm 800x800
Max pallet load Kg...
CENTER FAMUP MMV 200-80
FAMUP
09648
MOVING COLUMN
CNC SELCA 4040 DH
STROKES:
X axis 2000 mm
Y axis 800 mm
Z axis 700 mm
TABLE:
Table size 2400x800
T-slots 7
T-slots width mm...
09648
MOVING COLUMN
CNC SELCA 4040 DH
STROKES:
X axis 2000 mm
Y axis 800 mm
Z axis 700 mm
TABLE:
Table size 2400x800
T-slots 7
T-slots width mm...
CNC ROTARY TABLE OERLIKON
MILLING MANDELLI
MANDELLI
09536
1001 M 14 / U 2500/41KW - 4000
CNC Siemens 840 C
X stroke mm 4000 - longitudinal
Y stroke mm 2500 - vertical
Z stroke mm 2200 - cross
Max workpiece...
09536
1001 M 14 / U 2500/41KW - 4000
CNC Siemens 840 C
X stroke mm 4000 - longitudinal
Y stroke mm 2500 - vertical
Z stroke mm 2200 - cross
Max workpiece...
MILLING SACHMAN 521/FO
SACHMAN
08047
CNC Heidenhain TNC 415
TABLE
Size mm 2700x1000
Max load Kg 7500
AXIS
X axis (longitudinal) mm 2500
Y axis (vertical) mm 1200
Z axis (cross) mm...
08047
CNC Heidenhain TNC 415
TABLE
Size mm 2700x1000
Max load Kg 7500
AXIS
X axis (longitudinal) mm 2500
Y axis (vertical) mm 1200
Z axis (cross) mm...
.jpeg)
CENTER MIKRON UCP600
MIKRON
09247
5-AXIS SIMULTANEOUS
CNC HEIDENHAIN TNC 430 M
X axis travel 530 mm
Y axis travel 450 mm
Z axis travel 450 mm
Spindle speed rpm 12000
Spindle power kW...
09247
5-AXIS SIMULTANEOUS
CNC HEIDENHAIN TNC 430 M
X axis travel 530 mm
Y axis travel 450 mm
Z axis travel 450 mm
Spindle speed rpm 12000
Spindle power kW...
BED TYPE MILLING MACHINE FPT SPAZIO 20
FPT
10175
CNC SELCA 4045
AXIS TRAVEL:
X mm 2000
Y mm 800
Z mm 1250
Rapid feedrate mm/min 20.000
TABLE:
Dimensions mm 2200x750
Max load on table 3500 kg
T...
10175
CNC SELCA 4045
AXIS TRAVEL:
X mm 2000
Y mm 800
Z mm 1250
Rapid feedrate mm/min 20.000
TABLE:
Dimensions mm 2200x750
Max load on table 3500 kg
T...
BENDER PROFILES MACHINE SERTOM
SERTOM
06047
MOD. PP 180/200
LONG SHAFTS
WITH UPPER STIFFNESS GROUP AND
TELESCOPIC GROUPS FOR PROFILES BENDING
Central working roll diameter mm 610
Lateral...
06047
MOD. PP 180/200
LONG SHAFTS
WITH UPPER STIFFNESS GROUP AND
TELESCOPIC GROUPS FOR PROFILES BENDING
Central working roll diameter mm 610
Lateral...
CENTER OKUMA MOD. MX 40 HA
OKUMA
06973
HORIZONTAL, ROTOPALLET
CNC OSP 7000 M
Axis X mm 560
Axis Y mm 610
Axis Z mm 560
Pallet dimensions mm 400x400
Pallet load Kg 400
Min. angle indexing...
06973
HORIZONTAL, ROTOPALLET
CNC OSP 7000 M
Axis X mm 560
Axis Y mm 610
Axis Z mm 560
Pallet dimensions mm 400x400
Pallet load Kg 400
Min. angle indexing...
CNC LATHE TONGTAI TOPPER TGL20
TONGTAI
New05412
2 AXIS
CNC FANUC Oi-TC
WORKING CAPACITY:
Max swing diameter mm.450
Max turning diameter mm.370
Max workpiece weight Kg.20
Axis X mm.260+1050
Axis Z...
New05412
2 AXIS
CNC FANUC Oi-TC
WORKING CAPACITY:
Max swing diameter mm.450
Max turning diameter mm.370
Max workpiece weight Kg.20
Axis X mm.260+1050
Axis Z...
GRINDING MININI MOD. TH 10.30
MININI
New04959
- Dimensioni di lavoro mm 3100 x 1100
- Table mm.3020x605
- axis X mm.3200
- grinding height mm.1000
- grinding width mm.1000 (+ wheel width)
- wheel...
New04959
- Dimensioni di lavoro mm 3100 x 1100
- Table mm.3020x605
- axis X mm.3200
- grinding height mm.1000
- grinding width mm.1000 (+ wheel width)
- wheel...
MIG-MAG WELDING SYSTEM ISAM
MILLER
09746
COMPOSED OF:
-BM 3X3 MANIPULATOR with sliding tracks
-MILLER Deltaweld 602 welding machine
with COOLMATE W3 cooling
Power 450 A
-ISAM PTR OL/50/S...
09746
COMPOSED OF:
-BM 3X3 MANIPULATOR with sliding tracks
-MILLER Deltaweld 602 welding machine
with COOLMATE W3 cooling
Power 450 A
-ISAM PTR OL/50/S...
SHARPENING SCHNEEBERGER
SCHNEEBERGER
08646
MOD. MRG GEMINI
CNC FANUC 160M
AXIS CNC:
Axis X stroke mm 360
Axis Y stroke mm 270
Axis Z stroke mm 270
AXIS X,Y,Z:
Resolution di 0,1 Mikron
AXIS...
08646
MOD. MRG GEMINI
CNC FANUC 160M
AXIS CNC:
Axis X stroke mm 360
Axis Y stroke mm 270
Axis Z stroke mm 270
AXIS X,Y,Z:
Resolution di 0,1 Mikron
AXIS...
SURFACE GRINDER MENGELE PSM 1600SR-J
MENGELE
RTF.VER.O163
ROTARY TABLE MM 16OO
VERTICAL HEAD IN SECTORS MM 6OO
TABLE TRASLATION ON AXIS X MM 15OO
VERTICAL AXIS MM 6OO
POWER KW 60
USED MACHINE
RTF.VER.O163
ROTARY TABLE MM 16OO
VERTICAL HEAD IN SECTORS MM 6OO
TABLE TRASLATION ON AXIS X MM 15OO
VERTICAL AXIS MM 6OO
POWER KW 60
USED MACHINE
.jpeg)
VERTICAL MACHINING CENTRE EUMACH
EUMACH
10234
MOD. HSM 1575
CNC Fanuc 0i-MF
TECHNICAL DETAILS:
-Travel X axis 1500 mm
-Travel Y axis 750 mm
-Travel Z axis 650 mm
-Distance spindle nose to tabl...
10234
MOD. HSM 1575
CNC Fanuc 0i-MF
TECHNICAL DETAILS:
-Travel X axis 1500 mm
-Travel Y axis 750 mm
-Travel Z axis 650 mm
-Distance spindle nose to tabl...
MILLING BOMAC MOD. FU150ST
BOMAC
10433
TECHNICAL FEATURES:
TABLE
Dimensions 500x1000 mm
Vertical table 250x1200 mm
Table T-slots mm 14x63 No. 5
Vertical table T-slots mm 14x63 No. 3
Table...
10433
TECHNICAL FEATURES:
TABLE
Dimensions 500x1000 mm
Vertical table 250x1200 mm
Table T-slots mm 14x63 No. 5
Vertical table T-slots mm 14x63 No. 3
Table...
CENTER DMG DMU 50
DMG
07885
5 AXIS
CNC Heidenhain iTNC-530
STROKES:
Axis X mm 500
Axis Y mm 450
Axis Z mm 400
Axis B degrees -5/+110
Axis C degrees 360
TABLE:
AXIS C
Dimensions...
07885
5 AXIS
CNC Heidenhain iTNC-530
STROKES:
Axis X mm 500
Axis Y mm 450
Axis Z mm 400
Axis B degrees -5/+110
Axis C degrees 360
TABLE:
AXIS C
Dimensions...
CENTER FAGIMA MOD. FA 12-50 BIG
FAGIMA
08344
CNC HEIDENHAIN iTNC 530
TABLE:
TABLE DIMESIONS 600x1500 mm
MAX TABLE LOAD 1400 Kg
TRAVELS:
X-AXIS TRAVEL 1250 mm
Y-AXIS TRAVEL 700 mm
Z-AXIS...
08344
CNC HEIDENHAIN iTNC 530
TABLE:
TABLE DIMESIONS 600x1500 mm
MAX TABLE LOAD 1400 Kg
TRAVELS:
X-AXIS TRAVEL 1250 mm
Y-AXIS TRAVEL 700 mm
Z-AXIS...
CENTER HURON KMILL 10
HURON
09895
CNC HEIDENHAIN TNC620
TABLE:
Table size mm 1250x700
Table load Kg 1500
T-slots number 6
Distance between T-slots mm 100
T-slots width mm 18 H...
09895
CNC HEIDENHAIN TNC620
TABLE:
Table size mm 1250x700
Table load Kg 1500
T-slots number 6
Distance between T-slots mm 100
T-slots width mm 18 H...
CENTER MIKRON MOD. VCP 1350
MIKRON
09640
CNC Heidenhain iTNC 530
TRAVEL:
X 1350 mm
Y 900 mm
Z 750 mm
TABLE:
Table dimensions 1425x860 mm
Max table load 1800kg
SPINDLE:
Spindle speed 0-12000...
09640
CNC Heidenhain iTNC 530
TRAVEL:
X 1350 mm
Y 900 mm
Z 750 mm
TABLE:
Table dimensions 1425x860 mm
Max table load 1800kg
SPINDLE:
Spindle speed 0-12000...
LATHE PBR MOD. TM-30x4000
PBR
09539
Center height mm 300
Distance between centers mm 4.000
Maximum turning diameter over bed mm 620
Maximum turning diameter over cross slide mm 400
Bed...
09539
Center height mm 300
Distance between centers mm 4.000
Maximum turning diameter over bed mm 620
Maximum turning diameter over cross slide mm 400
Bed...
SHOT BLASTING MACHINE OMSG
OMSG
10374
MOD. CWB 850 4T L
Steel mesh belt shot blasting machine, Type CWB 850 T4 L, equipped with:
Automatic turbine speed variation with inverter
-Four...
10374
MOD. CWB 850 4T L
Steel mesh belt shot blasting machine, Type CWB 850 T4 L, equipped with:
Automatic turbine speed variation with inverter
-Four...
DEEP HOLE DRILLING IMSA MOD. MF800B2
IMSA
09526
CNC SELCA 3045
ROTARY TABLE:
Work surface size 1.000x800 mm
Rotation positions 360,000
Max load allowed (rotating piece) 4000 Kg
AXIS TRAVELS - WORK...
09526
CNC SELCA 3045
ROTARY TABLE:
Work surface size 1.000x800 mm
Rotation positions 360,000
Max load allowed (rotating piece) 4000 Kg
AXIS TRAVELS - WORK...
.jpeg)
LATHE RIVOL 700x12000
RIVOL
09718
Height of center mm 700
Turning diameter mm 1400
Turning diameter on the gap mm 1760
Turning diameter on the carriage mm 960
Distance between...
09718
Height of center mm 700
Turning diameter mm 1400
Turning diameter on the gap mm 1760
Turning diameter on the carriage mm 960
Distance between...
CENTER MAS MOD. MCV 1270 POWER
MAS
08877
CNC HEIDENHAIN iTNC 530
TABLE:
Table surface mm 1500x670
T-slots (numberxwidthxspacing) mm 5x18x125
Max table weight Kg 1200
Table height above the...
08877
CNC HEIDENHAIN iTNC 530
TABLE:
Table surface mm 1500x670
T-slots (numberxwidthxspacing) mm 5x18x125
Max table weight Kg 1200
Table height above the...
CENTER QUASER MOD. MK60II-H
QUASER
09009
CNC FANUC 18 MC
STROKES:
Axis X mm 710
Axis Y mm 610
Axis Z mm 610
Distance from table surface to spindle center mm 50-660
TABLE:
Number of pallet...
09009
CNC FANUC 18 MC
STROKES:
Axis X mm 710
Axis Y mm 610
Axis Z mm 610
Distance from table surface to spindle center mm 50-660
TABLE:
Number of pallet...
.jpeg)
CENTER DECKEL MAHO DMC 100 V
DECKEL MAHO
08776
CNC HEIDENHAIN TNC 426
STROKES:
X axis 1000 mm
Y axis 800 mm
Z axis 500 mm
TABLE:
Table surface with T-slot DIN 650-14 mm 1250x800
Max load on the...
08776
CNC HEIDENHAIN TNC 426
STROKES:
X axis 1000 mm
Y axis 800 mm
Z axis 500 mm
TABLE:
Table surface with T-slot DIN 650-14 mm 1250x800
Max load on the...
GRINDING LODI MOD. T130.65 CN
LODI
09830
Max longitudinal table travel 1.500 mm
Min. longitudinal table travel 150 mm
Max cross stroke 650 mm
Grinding length 1.300 mm
Grinding width 650...
09830
Max longitudinal table travel 1.500 mm
Min. longitudinal table travel 150 mm
Max cross stroke 650 mm
Grinding length 1.300 mm
Grinding width 650...
LATHE DENVER 480x5000
DENVER
09737
MOD. HL 960x5000
CAPACITY':
Swing diameter over the bed 960 mm
Swing diameter over cross slide 650 mm
Swing diameter over gap 1390 mm
Distance...
09737
MOD. HL 960x5000
CAPACITY':
Swing diameter over the bed 960 mm
Swing diameter over cross slide 650 mm
Swing diameter over gap 1390 mm
Distance...
LATHE SIBIMEX CU 1000x5000
SIBIMEX
09716
Height of center mm 500
Turning diameter on the bed mm 1090
Turning diameter on the cross carriage mm 690
Turning diameter on the gap mm 1250
Bed...
09716
Height of center mm 500
Turning diameter on the bed mm 1090
Turning diameter on the cross carriage mm 690
Turning diameter on the gap mm 1250
Bed...
.jpeg)
PRESS NAVA MOD. 2MI/250/125/B
NAVA
09443
Max ram force 250 tons
Max blank holder force 125 tons
Max ram stroke 800 mm
Max blank holder stroke 350 mm
Max ram pressure Kg/cm2 220
Max blank...
09443
Max ram force 250 tons
Max blank holder force 125 tons
Max ram stroke 800 mm
Max blank holder stroke 350 mm
Max ram pressure Kg/cm2 220
Max blank...
PRESS TERENZIO T 400 B/S
TERENZIO
07824
4 COLUMNS
Max power KN 4000
Max pressure Bar 200
Piston diameter mm 505
Stroke of moving bench mm 800
N.2 benches
N.1 working spaces
Day light of...
07824
4 COLUMNS
Max power KN 4000
Max pressure Bar 200
Piston diameter mm 505
Stroke of moving bench mm 800
N.2 benches
N.1 working spaces
Day light of...
TEST MOULDING PRESS MILLUTENSIL MIL 143
MILLUTENSIL
10128
Useful length of the table mm 1400
Useful width of the table mm 1200
Max passage between the columns on the length mm 1540
Max passage between the...
10128
Useful length of the table mm 1400
Useful width of the table mm 1200
Max passage between the columns on the length mm 1540
Max passage between the...
MILLING BOMAC GEVS 300AL
BOMAC
10395
TECHNICAL AND CONSTRUCTION FEATURES:
TABLE
Dimensions 1470x370 mm
T-slots (center distance) mm 18x3x80
STROKES
Longitudinal (manual/automatic)...
10395
TECHNICAL AND CONSTRUCTION FEATURES:
TABLE
Dimensions 1470x370 mm
T-slots (center distance) mm 18x3x80
STROKES
Longitudinal (manual/automatic)...
LATHE GILDEMEISTER CTX 420
GILDEMEISTER
09236
Y-AXIS + C-AXIS
LIVE TOOLS
TAILSTOCK
CNC HEIDENHAIN
WORKING AREA:
Max swing diameter over the bed mm 680
Max swing diameter on the carriage mm...
09236
Y-AXIS + C-AXIS
LIVE TOOLS
TAILSTOCK
CNC HEIDENHAIN
WORKING AREA:
Max swing diameter over the bed mm 680
Max swing diameter on the carriage mm...
LATHE BOMAC MOD. AUTRONIC 40P
BOMAC
09905
mm 200x1000
TECHNICAL FEATURES
Max swing diameter on the bed 400 mm
Max swing diameter on the slide 200 mm
Max turning diameter mm 350
Distance...
09905
mm 200x1000
TECHNICAL FEATURES
Max swing diameter on the bed 400 mm
Max swing diameter on the slide 200 mm
Max turning diameter mm 350
Distance...
BORING PAMA ACC 110
PAMA
07721
FLOOR TYPE
CONVENTIONAL
Travel axis X mm 3000 (longitudinal)
Travel axis Y mm 2000 (vertical)
Spindle travel W mm 300 (diameter 280 mm)
Spindle...
07721
FLOOR TYPE
CONVENTIONAL
Travel axis X mm 3000 (longitudinal)
Travel axis Y mm 2000 (vertical)
Spindle travel W mm 300 (diameter 280 mm)
Spindle...
BORING TITAN MOD. AFD 150
TITAN
New04651
TRAVEL COLUMN
-SPINDLE DIAM MM.150
-SPINDLE CONE ISO 50
-N. SPINDLE TURNS (24 POSITIONS) TURNS/MIN. 5-1000
-AXIS LONGITUDINAL MM.940
-AXIS VERTICAL...
New04651
TRAVEL COLUMN
-SPINDLE DIAM MM.150
-SPINDLE CONE ISO 50
-N. SPINDLE TURNS (24 POSITIONS) TURNS/MIN. 5-1000
-AXIS LONGITUDINAL MM.940
-AXIS VERTICAL...
CENTER FAMUP MMV 120-65 LINEAR DRIVE
FAMUP
09646
LINEAR DRIVE
MOVING COLUMN
CNC SELCA 4045 PD
TABLE:
Table size mm 1.600x650
T-slots mm 5x18x125
Max load Kg 1000
TRAVEL:
Longitudinal X axis 1200...
09646
LINEAR DRIVE
MOVING COLUMN
CNC SELCA 4045 PD
TABLE:
Table size mm 1.600x650
T-slots mm 5x18x125
Max load Kg 1000
TRAVEL:
Longitudinal X axis 1200...
.JPG)
EXTERNAL GRINDER RUSSIAN XC3 600x4000
XC3
07433
Distance between center mm 4000
Height of center mm 300
Diameter Wheel mm 800
Width wheel mm 100
Overall size approx mm 12000 x 2900 x 2000 h
With :...
07433
Distance between center mm 4000
Height of center mm 300
Diameter Wheel mm 800
Width wheel mm 100
Overall size approx mm 12000 x 2900 x 2000 h
With :...
FRONTAL LATHE COLOMBO
COLOMBO
New02678
CNC FAGOR 8020
DIAMETER PLATEAU 1200 MM
TURNING DIAMETER: MM 1500
COMPLETE WITH:
AUTOMATIC TURRET
NR.04 TOOLS
USED MACHINE
New02678
CNC FAGOR 8020
DIAMETER PLATEAU 1200 MM
TURNING DIAMETER: MM 1500
COMPLETE WITH:
AUTOMATIC TURRET
NR.04 TOOLS
USED MACHINE
GRINDING LIZZINI MOD.EASY GRIND55
LIZZINI
New02776
EXTERNAL
CNC SIEMENS SINUMERIK 810G
STROKES MM.550x160
COMPLETE WITH:
- AUTOMATIC BALANCE
USED MACHINE
New02776
EXTERNAL
CNC SIEMENS SINUMERIK 810G
STROKES MM.550x160
COMPLETE WITH:
- AUTOMATIC BALANCE
USED MACHINE
HORIZONTAL MACHINE CENTER HECKERT CWK 630
HECKERT
New03432
TECHNICAL CHARACTERISTIC:
10000 RPM
Rapid speed: 24000 mm/min
-No turns/min 10000
Capacity table: 1200 Kg
Acceleration: G. 0,15
Table size: 630 x...
New03432
TECHNICAL CHARACTERISTIC:
10000 RPM
Rapid speed: 24000 mm/min
-No turns/min 10000
Capacity table: 1200 Kg
Acceleration: G. 0,15
Table size: 630 x...
MILLING CORREA MOD. CF-17 D
CORREA
09184
CNC HEIDENHAIN
Axis X stroke mm 2000
Axis Y stroke mm 800
Axis Z stroke mm 800
Table dimensions mm 2000x700
Max spindle speed rpm 3000
Spindle taper...
09184
CNC HEIDENHAIN
Axis X stroke mm 2000
Axis Y stroke mm 800
Axis Z stroke mm 800
Table dimensions mm 2000x700
Max spindle speed rpm 3000
Spindle taper...
MILLING MANDELLI
MANDELLI
09535
REGENT 1001 M 14 / U 4000
Siemens 840 C CNC
X stroke 4000 mm - longitudinal
Y stroke 2500 mm - vertical
Z stroke 2200 mm - cross
Table 1600 x 2000...
09535
REGENT 1001 M 14 / U 4000
Siemens 840 C CNC
X stroke 4000 mm - longitudinal
Y stroke 2500 mm - vertical
Z stroke 2200 mm - cross
Table 1600 x 2000...
MILLING RAMBAUDI RX 1000
RAMBAUDI
08773
CNC SELCA S1200
Table dimensions mm 2500x1000
Axis X stroke mm 2000
Axis Y stroke mm 1200
Axis Z stroke mm 1000
Spinde taper mm ISO 50
Spindle speed...
08773
CNC SELCA S1200
Table dimensions mm 2500x1000
Axis X stroke mm 2000
Axis Y stroke mm 1200
Axis Z stroke mm 1000
Spinde taper mm ISO 50
Spindle speed...
.JPG)
SUBMERGED ARC WELDING
WELDCLAD
09704
WELDCLAD SWL 4000 KG
SUBMERGED ARC WELDING MACHINE WITH TWO HEADS
Nr. 02 independent welding lines
Nr. 02 submerged arc welding systems
Nr. 02...
09704
WELDCLAD SWL 4000 KG
SUBMERGED ARC WELDING MACHINE WITH TWO HEADS
Nr. 02 independent welding lines
Nr. 02 submerged arc welding systems
Nr. 02...
WELDING MANIPULATOR
ISAM
09748
ISAM MOD. PTR OL/200S
ROTARY TABLE DIAM. 2200
WITH HYDRAULIC INCLINATION FROM 0°-105°
CAPACITY 20 TON.
USED MACHINE
09748
ISAM MOD. PTR OL/200S
ROTARY TABLE DIAM. 2200
WITH HYDRAULIC INCLINATION FROM 0°-105°
CAPACITY 20 TON.
USED MACHINE
MILLING BOMAC MOD. EVS300AL
BOMAC
10423
TECHNICAL AND CONSTRUCTION CHARACTERISTICS:
TABLE
Dimensions 1470x370 mm
T-slots (center distance) 18x3x80 mm
STROKES
Longitudinal...
10423
TECHNICAL AND CONSTRUCTION CHARACTERISTICS:
TABLE
Dimensions 1470x370 mm
T-slots (center distance) 18x3x80 mm
STROKES
Longitudinal...
CENTER HECKERT CWK630
HECKERT
New03431
HORIZONTAL MACHINE CENTER
TECHNICAL CHARACTERISTIC:
6000 RPM
Rapid speed: 6000 mm/min
Capacity table: 1200 Kg
Acceleration: G. 0,15
Table size: 630...
New03431
HORIZONTAL MACHINE CENTER
TECHNICAL CHARACTERISTIC:
6000 RPM
Rapid speed: 6000 mm/min
Capacity table: 1200 Kg
Acceleration: G. 0,15
Table size: 630...
LATHE CMT URSUS TCH 800x2000
CMT
09188
CNC ECS 2400
Height center mm 400
Distance between center mm 2000
Swing diameter over the bed mm 815
Swing diameter over the cross slide mm 485
Axis...
09188
CNC ECS 2400
Height center mm 400
Distance between center mm 2000
Swing diameter over the bed mm 815
Swing diameter over the cross slide mm 485
Axis...
LATHE GORNATI 350x5000
GORNATI
07293
mod. LEGOR 350
Height of center 350 mm
Ditance between center 5000 mm
Max turning diameter over carriage mm 420
Max turning diameter on bed mm...
07293
mod. LEGOR 350
Height of center 350 mm
Ditance between center 5000 mm
Max turning diameter over carriage mm 420
Max turning diameter on bed mm...
LATHE MERLI CLOVIS 640x6000
MERLI CLOVIS
09819
Height of centers over the bench 640 mm
Height of centers over the carriage 460 mm
Swing diameter on the bench 1280 mm
Swing diameter on the carriage...
09819
Height of centers over the bench 640 mm
Height of centers over the carriage 460 mm
Swing diameter on the bench 1280 mm
Swing diameter on the carriage...
BED TYPE MILLING MACHINE MECOF CR15 UNICA
MECOF
10176
CNC FIDIA CXR
Axis Travel:
X mm 2500
Y mm 1000
Z mm 1200
rapid feedrate mm/min 15.000
TABLE:
Dimensions mm 2700x900
MAx load on the table 8000...
10176
CNC FIDIA CXR
Axis Travel:
X mm 2500
Y mm 1000
Z mm 1200
rapid feedrate mm/min 15.000
TABLE:
Dimensions mm 2700x900
MAx load on the table 8000...
EXTERNAL GRINDING PREZIOSA
PRESS BRAKE GEKO MOD. CNC-HAP 30300
GECKO
09698
SYNCHRONIZED HYDRAULIC
CNC
Bending length 3050 mm
Force Ton 300
Stroke 245 mm
Tank 150 Lt.
Upper tool weight 40 kg
Lower tool weight 55 kg
Engine...
09698
SYNCHRONIZED HYDRAULIC
CNC
Bending length 3050 mm
Force Ton 300
Stroke 245 mm
Tank 150 Lt.
Upper tool weight 40 kg
Lower tool weight 55 kg
Engine...
LATHE ZMM MOD. CU 500MT x 2000
ZMM
08912
TRADITIONAL
Height of center mm.250
Turning diameter on bed mm.500
Turning diameter on carriage mm. 300
Turning diameter on gap mm.700
Whidth of bed...
08912
TRADITIONAL
Height of center mm.250
Turning diameter on bed mm.500
Turning diameter on carriage mm. 300
Turning diameter on gap mm.700
Whidth of bed...
CENTER SHE HONG MOD. HV-80 SG
SHE HONG
06396
CNC MELDAS 520A
STROKE
Longitudinal stroke (axis X) mm 2060
Cross stroke (axis Y) mm 1016
Vertical stroke (axis Z) mm 820
Distance between spindle...
06396
CNC MELDAS 520A
STROKE
Longitudinal stroke (axis X) mm 2060
Cross stroke (axis Y) mm 1016
Vertical stroke (axis Z) mm 820
Distance between spindle...
DRILLING SASS TRP 3500
SASS
07295
Drilling diameter mm 120
Lenght arm mm 3500
Vertical travel mm 1430
Max angle rotation 360 degree
Spindle diameter mm 135
Spindle stroke mm...
07295
Drilling diameter mm 120
Lenght arm mm 3500
Vertical travel mm 1430
Max angle rotation 360 degree
Spindle diameter mm 135
Spindle stroke mm...
.jpeg)
LATHE OMG ZANOLETTI 250x1500
OMG ZANOLETTI
09851
Height of centers 250 mm
Distance between centers 1500 mm
Turning diameter on the bench 500 mm
Turnable diameter in the gap 700 mm
Turning diameter...
09851
Height of centers 250 mm
Distance between centers 1500 mm
Turning diameter on the bench 500 mm
Turnable diameter in the gap 700 mm
Turning diameter...
MOULDING TEST TCS 100 TON
TCS
08771
Closing force kN 1000
Opening force kN 400
Lower plane size mm 2000x1500
Lower plane translation mm 1500
Max weight on the lower plane kN 200
Upper...
08771
Closing force kN 1000
Opening force kN 400
Lower plane size mm 2000x1500
Lower plane translation mm 1500
Max weight on the lower plane kN 200
Upper...
LATHE ZMM MOD. CU 500MT x 1500
ZMM
08911
TRADITIONAL
Height of center mm.250
Turning diameter on bed mm.500
Turning diameter on carriage mm. 300
Turning diameter on gap mm.700
Whidth of bed...
08911
TRADITIONAL
Height of center mm.250
Turning diameter on bed mm.500
Turning diameter on carriage mm. 300
Turning diameter on gap mm.700
Whidth of bed...
MILLING BOMAC MOD. FU30
BOMAC
10424
TECHNICAL AND CONSTRUCTION CHARACTERISTICS:
TABLE
Dimensions mm 1470x300
“T” slots mm N 3 16
Distance between slots mm 80
Table rotation...
10424
TECHNICAL AND CONSTRUCTION CHARACTERISTICS:
TABLE
Dimensions mm 1470x300
“T” slots mm N 3 16
Distance between slots mm 80
Table rotation...
LATHE CONVENTIONAL MERLI CLOVIS 50
MERLI CLOVIS
New04671
Height of center mm.510
Max diameter swing over bed mm.1020
Max diameter swing over cross carriage mm.620
Max diameter swing over gap...
New04671
Height of center mm.510
Max diameter swing over bed mm.1020
Max diameter swing over cross carriage mm.620
Max diameter swing over gap...
LATHE PBR MOD. TM 450x4000
PBR
10006
Height of centers mm 450
Max turning diameter on the bed mm 930
Max turning diameter on the cross carriage mm 600
Max turning diameter on the recess...
10006
Height of centers mm 450
Max turning diameter on the bed mm 930
Max turning diameter on the cross carriage mm 600
Max turning diameter on the recess...
VERTICAL CENTRE MATSURA Mod. RA 46
MATSUURA
New04388
VERTICAL
-CNC YASNAC-J 300 VIDEO GRAPHIC
-AXIS X MM. 1020
-AXIS Y MM.550
-AXIS Z MM.510
-TABLE SIZE MM.1000X490
-DISTANCE TABLE/ SPINDLE NOSE...
New04388
VERTICAL
-CNC YASNAC-J 300 VIDEO GRAPHIC
-AXIS X MM. 1020
-AXIS Y MM.550
-AXIS Z MM.510
-TABLE SIZE MM.1000X490
-DISTANCE TABLE/ SPINDLE NOSE...
LATHE BOMAC FC 250x2000
BOMAC
10419
AUTRON LUX FC 250x2000
TECHNICAL AND CONSTRUCTION CHARACTERISTICS:
Swing diameter on the bed mm 500
Swing diameter on the slide mm 300
Swing...
10419
AUTRON LUX FC 250x2000
TECHNICAL AND CONSTRUCTION CHARACTERISTICS:
Swing diameter on the bed mm 500
Swing diameter on the slide mm 300
Swing...
CENTER MAZAK VTC200C
MAZAK
08989
CNC MAZATROL 640 M
Table dimensions mm 2000x510
Max table load Kg 1000
Axis X stroke mm 1660
Axis Y stroke mm 510
Axis Z stroke mm 510
Spindle speed...
08989
CNC MAZATROL 640 M
Table dimensions mm 2000x510
Max table load Kg 1000
Axis X stroke mm 1660
Axis Y stroke mm 510
Axis Z stroke mm 510
Spindle speed...
CENTER MIND MACH-T VMC 1400/A
MIND
09846
CNC FANUC 0i-MC
TABLE:
Table dimensiona mm 1700x850
Max load on table Kg 200
STROKES:
Longitudinal X axis stroke 1400 mm
Cross Y axis stroke 850...
09846
CNC FANUC 0i-MC
TABLE:
Table dimensiona mm 1700x850
Max load on table Kg 200
STROKES:
Longitudinal X axis stroke 1400 mm
Cross Y axis stroke 850...
CENTER SIGMA MOD. ZENIT 2P-M
SIGMA
09191
VERTICAL
PALLET CHANGE
CNC FANUC 18i-M
STROKES:
X axis stroke 750 mm
Y axis stroke 420 mm
Z axis stroke 450 mm
Distance spindle axis/column mm...
09191
VERTICAL
PALLET CHANGE
CNC FANUC 18i-M
STROKES:
X axis stroke 750 mm
Y axis stroke 420 mm
Z axis stroke 450 mm
Distance spindle axis/column mm...
CENTRE HECKERT MOD. CWK 400
HECKERT
New04760
HORIZONTAL
CNC SIEMENS SINUMERIK 840C
-AXIS X MM.650
-AXIS Y MM.500
-AXIS Z MM.650
-HEIGHT FLOOR TO WORKING SURFACE MM.1000
-TOOL MAGAZINE N. 60
-MAX...
New04760
HORIZONTAL
CNC SIEMENS SINUMERIK 840C
-AXIS X MM.650
-AXIS Y MM.500
-AXIS Z MM.650
-HEIGHT FLOOR TO WORKING SURFACE MM.1000
-TOOL MAGAZINE N. 60
-MAX...
.jpeg)
CNC LATHE LYMCO BML-510
LYMCO
09719
CNC FANUC Oi-TC
Turning length 1578 mm
Turning diameter 510 mm
Bar passaging 90 mm
Spindle nose ASA A2-8
Spindle speed 2500 rpm
X axis travel 290...
09719
CNC FANUC Oi-TC
Turning length 1578 mm
Turning diameter 510 mm
Bar passaging 90 mm
Spindle nose ASA A2-8
Spindle speed 2500 rpm
X axis travel 290...
GENERATOR CURRENT SPARK
LATHE POTISJE 500x3000
POTISJE
06815
MOD. PA 50 DC
Distance between centers 3000 mm
Height center on the bed 500 mm
Height center on the gap 650 mm
Swing diameter on the bed 1000...
06815
MOD. PA 50 DC
Distance between centers 3000 mm
Height center on the bed 500 mm
Height center on the gap 650 mm
Swing diameter on the bed 1000...
MILLING OMV PARPAS FAS BPF-4-1600
PARPAS
09208
CNC SELCA 1200
Longitudinal stroke mm 1750
Cross stroke mm 750
Vertical stroke mm 650
Dualspindle milling head
Taper DIN 69871-40
Tool change 30...
09208
CNC SELCA 1200
Longitudinal stroke mm 1750
Cross stroke mm 750
Vertical stroke mm 650
Dualspindle milling head
Taper DIN 69871-40
Tool change 30...
MILLING SECMU MOD. C6
SECMU
09201
CNC Z16 DELECTRON
X axis stroke 2000 mm
Y axis stroke 1100 mm
Z axis stroke 700 mm
Table dimensions mm 2200x700
Spindle motor in d.c. kW 16
Spindle...
09201
CNC Z16 DELECTRON
X axis stroke 2000 mm
Y axis stroke 1100 mm
Z axis stroke 700 mm
Table dimensions mm 2200x700
Spindle motor in d.c. kW 16
Spindle...
PRESS RADAELLI 200 TON.
RADAELLI
08594
Max pressure ton 200
Stroke mm 200
Max distance between table and slide mm 800
Table dimensions mm 1400x900
Slide dimensions mm 1200x850
Distance...
08594
Max pressure ton 200
Stroke mm 200
Max distance between table and slide mm 800
Table dimensions mm 1400x900
Slide dimensions mm 1200x850
Distance...
PRESS VICLA MOD. TOR 250/25
VICLA
09512
CNC ESA S 530
Force ton 250
Bending lenght mm 2500
Distance between center mm 2000
Gap mm 400
Cylinders stroke mm 200
Stroke mm 100
Height table mm...
09512
CNC ESA S 530
Force ton 250
Bending lenght mm 2500
Distance between center mm 2000
Gap mm 400
Cylinders stroke mm 200
Stroke mm 100
Height table mm...
VERTICAL LATHE DAEWOO PUMA IV 300
DAEWOO
07810
CNC Fanuc 18i-TB
CAPACITA':
Max swing diameter mm 400
Max turning diameter mm 320
Max turning lenght mm 254
Max laod Kg 100
STROKES:
Axis X stroke...
07810
CNC Fanuc 18i-TB
CAPACITA':
Max swing diameter mm 400
Max turning diameter mm 320
Max turning lenght mm 254
Max laod Kg 100
STROKES:
Axis X stroke...
WIRE ERODER ONA AE-400
ONA
09654
X stroke mm 600
Y stroke 400 mm
Z stroke 400 mm
U - V stroke 80 mm
Max piece dimensions (X,Y,Z) mm 1000x810x400
Max piece weight 3000 kg
Conical...
09654
X stroke mm 600
Y stroke 400 mm
Z stroke 400 mm
U - V stroke 80 mm
Max piece dimensions (X,Y,Z) mm 1000x810x400
Max piece weight 3000 kg
Conical...
LATHE BMP 260x2000
BMP
07658
MOD. 260
Height center mm 260
Distance between center mm 2000
Swing diameter over bed mm 530
Swing diameter over carriage mm 310
Swing diameter over...
07658
MOD. 260
Height center mm 260
Distance between center mm 2000
Swing diameter over bed mm 530
Swing diameter over carriage mm 310
Swing diameter over...
LATHE BOMAC FC 250x1500
BOMAC
10418
AUTRON LUX FC 250x1500
TECHNICAL AND CONSTRUCTION CHARACTERISTICS:
Swing diameter on the bed mm 500
Swing diameter on the slide mm 300
Swing...
10418
AUTRON LUX FC 250x1500
TECHNICAL AND CONSTRUCTION CHARACTERISTICS:
Swing diameter on the bed mm 500
Swing diameter on the slide mm 300
Swing...
LATHE BOMAC FC 200x1000
BOMAC
10119
AUTRON LUX FC 200x1000
TECHNICAL AND CONSTRUCTION CHARACTERISTICS:
Swing diameter on the bed mm 400
Swing diameter on the slide mm 220
Swing diameter...
10119
AUTRON LUX FC 200x1000
TECHNICAL AND CONSTRUCTION CHARACTERISTICS:
Swing diameter on the bed mm 400
Swing diameter on the slide mm 220
Swing diameter...
BENDER PROFILES COLD GLM 160
GML
CLD.VER.OOO3
MOD PA 16
- Wing external mm.100x100x14
Diameter min. mm.800
- Wing internal mm.90x90x9
Diameter min. mm.800
- HE horizontal mm.80x80 ...
CLD.VER.OOO3
MOD PA 16
- Wing external mm.100x100x14
Diameter min. mm.800
- Wing internal mm.90x90x9
Diameter min. mm.800
- HE horizontal mm.80x80 ...
BORING SAN ROCCO MEC 120
SAN ROCCO
06483
CNC HEIDENHAIN 360
-Spindle bore diameter mm 120
-Spindle bore taper ISO 50
-Spindle nose milling diameter mm 203
-Spindle bore stroke mm...
06483
CNC HEIDENHAIN 360
-Spindle bore diameter mm 120
-Spindle bore taper ISO 50
-Spindle nose milling diameter mm 203
-Spindle bore stroke mm...
CNC ROTARY TABLE COLGAR
SHARPENING 3M MOD. CNC 8000
3 M
07287
Sharpening capacity (lenght) mm 300 (35 degrees) / mm 200 (40 degrees)
Sharpening diameter max mm 175
LINEAR AXIS:
X axis mm 380
Y axis mm 200...
07287
Sharpening capacity (lenght) mm 300 (35 degrees) / mm 200 (40 degrees)
Sharpening diameter max mm 175
LINEAR AXIS:
X axis mm 380
Y axis mm 200...
SHEAR FARINA MOD. CFO 316/20
FARINA
09689
HYDRAULIC SHEAR
Useful cutting length mm 3100
Cutting thickness mm 16/20
Recess mm 500
Motorized rear register mm 1,000
ESA Tria 220 register...
09689
HYDRAULIC SHEAR
Useful cutting length mm 3100
Cutting thickness mm 16/20
Recess mm 500
Motorized rear register mm 1,000
ESA Tria 220 register...
TEACH-IN LATHE ECOCA MOD. EL-6120E
ECOCA
New03932
CNC MITSUBISHI MOD. M 520
DISTANCE BETWEEN CENTER MM 2000
HEIGHT OF CENTER MM 305
MAX TURNING DIAMETER OVER BED MM 610
MAX TURNING DIAMETER OVER...
New03932
CNC MITSUBISHI MOD. M 520
DISTANCE BETWEEN CENTER MM 2000
HEIGHT OF CENTER MM 305
MAX TURNING DIAMETER OVER BED MM 610
MAX TURNING DIAMETER OVER...
.jpeg)
VERTICAL MACHINING CENTRE FEELER FV600
FEELER
09249
CNC SIEMENS SINUMERIK 810D
TABLE:
Table size mm 400x800
T slots mm 18x3x100
Table load capacity Kg 300
AXIS:
X axis mm 610
Y axis mm 500
Z axis mm...
09249
CNC SIEMENS SINUMERIK 810D
TABLE:
Table size mm 400x800
T slots mm 18x3x100
Table load capacity Kg 300
AXIS:
X axis mm 610
Y axis mm 500
Z axis mm...
CNC ROTARY TABLE
MECOF
07448
CNC Automatic rotary tables TGTR:
-dimensions mm 2000x2000
-axis V (traslazione) mm 1500
-load ton 20
USED TABLE
07448
CNC Automatic rotary tables TGTR:
-dimensions mm 2000x2000
-axis V (traslazione) mm 1500
-load ton 20
USED TABLE
ERODER ONA HS-600
ONA
09655
Spark
3-axis controlled
AXIS TRAVELS:
X mm 1000
Y mm 600
Z mm 500
Tank size mm 1700x1000x700
Support table mm 1200x700
Maximum load capacity 4,000...
09655
Spark
3-axis controlled
AXIS TRAVELS:
X mm 1000
Y mm 600
Z mm 500
Tank size mm 1700x1000x700
Support table mm 1200x700
Maximum load capacity 4,000...
GANTRY PLANO- MILLER CARNAGHI
CARNAGHI
New01499
Max stroke mm.4500x1200X 800
single milling spindle
No 2 lateral carriage
used machine
New01499
Max stroke mm.4500x1200X 800
single milling spindle
No 2 lateral carriage
used machine
.jpeg)
LATHE MORI SEIKI DL 150 MC
MORI SEIKI
07472
LIVE TOOLS
Controllo numerico MSC-518
Max turning diameter mm 170
Max bar turning diameter mm 46
Max lworking lenght mm 200
Main motor power Kw...
07472
LIVE TOOLS
Controllo numerico MSC-518
Max turning diameter mm 170
Max bar turning diameter mm 46
Max lworking lenght mm 200
Main motor power Kw...
PRESS ROVETTA 2OO TON
ROVETTA
PRS.STA.OO14
STROKE mm.140
STROKE / Min Nr. 120
BED SIZE mm 500 X 530
DISTANCE BETWEEN BED AND SLEDGE HAMMER mm 420
CUSHION BLANK HOLDER
SLIDE STROKE mm.40...
PRS.STA.OO14
STROKE mm.140
STROKE / Min Nr. 120
BED SIZE mm 500 X 530
DISTANCE BETWEEN BED AND SLEDGE HAMMER mm 420
CUSHION BLANK HOLDER
SLIDE STROKE mm.40...
WELDING POSITIONER
LATHE PUMA MOD. 230 MB
DAEWOO
09683
LIVE TOOLS
CNC FANUC 18-T
CAPACITY:
Max. rotating diameter on table mm 550
Max. rotating diameter on carriage mm 390
Max. turning diameter mm...
09683
LIVE TOOLS
CNC FANUC 18-T
CAPACITY:
Max. rotating diameter on table mm 550
Max. rotating diameter on carriage mm 390
Max. turning diameter mm...
MILLING ZEUS MOD. FZ 160
ZEUS
09209
WITH D.R.O.
TABLE:
Surface 1600x360 mm
X axis stroke 1200 mm
Y axis stroke 380 mm
Z axis stroke 510 mm
SPINDLE:
Spindle taper ISO 50
Spindle nose...
09209
WITH D.R.O.
TABLE:
Surface 1600x360 mm
X axis stroke 1200 mm
Y axis stroke 380 mm
Z axis stroke 510 mm
SPINDLE:
Spindle taper ISO 50
Spindle nose...
CENTER LEADWELL V40
LEADWELL
08952
TAVOLA:
Table dimensions mm 1200x500
Max load Kg 500
STROKES:
Axis X mm 1020
Axis Y mm 510
Axis Z mm 510
Distance between spindle nose to table...
08952
TAVOLA:
Table dimensions mm 1200x500
Max load Kg 500
STROKES:
Axis X mm 1020
Axis Y mm 510
Axis Z mm 510
Distance between spindle nose to table...
LATHE MERLI CLOVIS 360x1500
MERLI CLOVIS
09894
Height of centers mm 360
Distance between centers mm 1500
Bar passaging mm 105
Spindle speed rpm 21-1010
Spindle taper CAMLOCK 8
EQUIPPED...
09894
Height of centers mm 360
Distance between centers mm 1500
Bar passaging mm 105
Spindle speed rpm 21-1010
Spindle taper CAMLOCK 8
EQUIPPED...
LATHE PADOVANI LABOR 200x1500
PADOVANI
08827
DIMENSIONS:
Height of centers mm 200
Distance between centers mm 1500
Bed width mm 290
Max turning diameter on the bed mm 400
Max turning diameter on...
08827
DIMENSIONS:
Height of centers mm 200
Distance between centers mm 1500
Bed width mm 290
Max turning diameter on the bed mm 400
Max turning diameter on...
LATHE VERTICAL OMBA MM.1500
OMBA
New04813
-SPINDLE DIAMETER MM.1500
-MAX TURNING DIAMETER MM.1800
-MAX TURNING HEIGHT MM.1000
-RAM STROKE MM.650
-VERTICAL MOVEMENT MM.900
-RAM SECTION MM.175...
New04813
-SPINDLE DIAMETER MM.1500
-MAX TURNING DIAMETER MM.1800
-MAX TURNING HEIGHT MM.1000
-RAM STROKE MM.650
-VERTICAL MOVEMENT MM.900
-RAM SECTION MM.175...
PRESS BRAKE CBC MOD. 100/30-IS
CBC
07337
OLEODINAMIC
6 AXIS
NEW CNC DELEM 69T
Bed lenght mm 3050
Tonnage t. 100
Equipped with:
Mechanical compensation system
USED MACHINE
07337
OLEODINAMIC
6 AXIS
NEW CNC DELEM 69T
Bed lenght mm 3050
Tonnage t. 100
Equipped with:
Mechanical compensation system
USED MACHINE
PUNCHING SHEAR ADRIA MACHINE HKM 85
ADRIATICA INDUSTRIALE
09259
WITH TWO PISTONS
PUNCHING:
Diameter x max thickness mm 33x20
Diameter x thickness mm 57x12
Max diameter mm 110x4
Stroke 80 mm
Shot counter in (20 mm)...
09259
WITH TWO PISTONS
PUNCHING:
Diameter x max thickness mm 33x20
Diameter x thickness mm 57x12
Max diameter mm 110x4
Stroke 80 mm
Shot counter in (20 mm)...
AUTOMATIC LATHE OMG ZANOLETTI
OMG ZANOLETTI
07222
MOD. E250x1000
CNC VIDUE
Height of center mm 250
Turning diameter on the bed mm 500
Turning diameter on the cross carriage mm 250
Turning diameter...
07222
MOD. E250x1000
CNC VIDUE
Height of center mm 250
Turning diameter on the bed mm 500
Turning diameter on the cross carriage mm 250
Turning diameter...
BED MILLING MACHINE NOVAR KBF 800
NOVAR
09945
Bed type
CNC SELCA
Table dimensions mm 300x800
TRAVELS:
X axis mm 2700
Y axis mm 900
Z axis mm 1050
Milling head type H
B axis automatic...
09945
Bed type
CNC SELCA
Table dimensions mm 300x800
TRAVELS:
X axis mm 2700
Y axis mm 900
Z axis mm 1050
Milling head type H
B axis automatic...
CENTER PARPAS P15A
PARPAS
10045
CNC FANUC O-M series
TABLE:
Table dimensions mm 1650x700
T-slots (width x n. x pitch) mm 22x5x150
Max table load Kg 1200
STROKES:
X-axis mm...
10045
CNC FANUC O-M series
TABLE:
Table dimensions mm 1650x700
T-slots (width x n. x pitch) mm 22x5x150
Max table load Kg 1200
STROKES:
X-axis mm...
.jpeg)
DRILLING SASS MOD. TM 80-2500
SASS
08883
Max drilling diameter on steel mm 80
Max drilling diameter on cast iron mm 100
Min. and max arm mm 685-2500
Base-spindle nose min. and max mm...
08883
Max drilling diameter on steel mm 80
Max drilling diameter on cast iron mm 100
Min. and max arm mm 685-2500
Base-spindle nose min. and max mm...
DRILLING SASS MOD.TM 2500
SASS
07450
CAPACITY':
Drilling capacity on steel R = 60 mm 100
Drilling capacity on cast iron 20-22 mm 150
SPINDLE:
Sliding quill diam. mm 110
Cone taper Morse...
07450
CAPACITY':
Drilling capacity on steel R = 60 mm 100
Drilling capacity on cast iron 20-22 mm 150
SPINDLE:
Sliding quill diam. mm 110
Cone taper Morse...
LATHE CMT URSUS TC 600x1500
CMT
09670
CNC FAGOR 8055
Height of centers 300 mm
Distance between centers 1500 mm
Swing diameter on the bed 600 mm
Swing diameter on the slide 365 mm
Z-axis...
09670
CNC FAGOR 8055
Height of centers 300 mm
Distance between centers 1500 mm
Swing diameter on the bed 600 mm
Swing diameter on the slide 365 mm
Z-axis...
MILLING FIL FA 130
FIL
06782
CNC HEIDENHAIN TNC 355
STROKE:
Longitudinal axis X mm 1300
Cross axis Y mm 650
Vertical axis Z mm 750
TABLE:
Working surface mm 1600x750
T-slots mm...
06782
CNC HEIDENHAIN TNC 355
STROKE:
Longitudinal axis X mm 1300
Cross axis Y mm 650
Vertical axis Z mm 750
TABLE:
Working surface mm 1600x750
T-slots mm...
MILLING FIL FA 160
FIL
09932
CNC SELCA 3045
Table dimensions mm 1950x650
Max table load kg 2500
Axis X stroke mm 1600
Axis Y stroke mm 700
Axis Z stroke mm 850
Horizontal...
09932
CNC SELCA 3045
Table dimensions mm 1950x650
Max table load kg 2500
Axis X stroke mm 1600
Axis Y stroke mm 700
Axis Z stroke mm 850
Horizontal...
.jpeg)
MILLING RAMBAUDI MOD. MS3
RAMBAUDI
09523
Table dimensions 1300x300 mm
Longitudinal stroke 950 mm
Cross stroke 300 mm
Vertical stroke 445 mm
Ram stroke mm 550
Horizontal spindle - Taper ISO...
09523
Table dimensions 1300x300 mm
Longitudinal stroke 950 mm
Cross stroke 300 mm
Vertical stroke 445 mm
Ram stroke mm 550
Horizontal spindle - Taper ISO...
MILLING SECMU FAS A2
SECMU
06830
CNC SELCA 1200
Axis X mm 1500
Axis Y mm 800
Axis Z mm 700
Table dimensions mm 1300x700
EQUIPPED WITH:
Birotative head
OPTIONAL:
Tavola girevole mm...
06830
CNC SELCA 1200
Axis X mm 1500
Axis Y mm 800
Axis Z mm 700
Table dimensions mm 1300x700
EQUIPPED WITH:
Birotative head
OPTIONAL:
Tavola girevole mm...
TILTING ROTARY TABLE
CB FERRARI
09743
C.B. FERRARI WITH 2 CONTINUOUS AXIS
COMPLETELY REBUILT MECHANICALLY AND HYDRAULICLY
Surface dimensions mm 1250x750
Height of the table top from the...
09743
C.B. FERRARI WITH 2 CONTINUOUS AXIS
COMPLETELY REBUILT MECHANICALLY AND HYDRAULICLY
Surface dimensions mm 1250x750
Height of the table top from the...
.jpg)
PRESS PRESSIX T50 CNR4
PRESSIX
09939
C-FRAME PRESSES
Nominal force: kN 500
Mass: Kg. 3.500
Shots per minute: N° 90
Max. insertions per minute: N° 41
Min./max. operating air pressure:...
09939
C-FRAME PRESSES
Nominal force: kN 500
Mass: Kg. 3.500
Shots per minute: N° 90
Max. insertions per minute: N° 41
Min./max. operating air pressure:...
AUTO-LATHE CMT URSUS PLUS 300
CMT
08739
CNC VIDEU NC 916
Distance between center mm 2000
Height of center mm 300
Spindle bore mm 105
Spindle taper Type Camlook
EQUIPPED WITH:
Self-centring...
08739
CNC VIDEU NC 916
Distance between center mm 2000
Height of center mm 300
Spindle bore mm 105
Spindle taper Type Camlook
EQUIPPED WITH:
Self-centring...
CAGLIO PRESS C-TYPE 120 TON
CAGLIO
07281
-Maximum pressure Ton 120
-Strokes per minute c.a. 55
-Adjustable ram stroke mm.20-120
-Table size: width x depth mm 900x600
-Ram size: width x depth...
07281
-Maximum pressure Ton 120
-Strokes per minute c.a. 55
-Adjustable ram stroke mm.20-120
-Table size: width x depth mm 900x600
-Ram size: width x depth...
CENTER FAGIMA MOD. MGFV 1000
FAGIMA
07523
CNC Heidenhain 410
STROKES:
Axis X longitudinal mm 1000
Axis Y cross mm 550
Axis Z vertical mm 500
TABLE:
Table dimensions mm...
07523
CNC Heidenhain 410
STROKES:
Axis X longitudinal mm 1000
Axis Y cross mm 550
Axis Z vertical mm 500
TABLE:
Table dimensions mm...
CENTER FAMUP MP 80 E
FAMUP
09661
CNC SELCA S3045PD
TABLE:
Table size mm 1000x520
T-slots n.5
T-slots width mm 18
Distance T-slots mm 100
Max load Kg 600
STROKES:
Longitudinal X axis...
09661
CNC SELCA S3045PD
TABLE:
Table size mm 1000x520
T-slots n.5
T-slots width mm 18
Distance T-slots mm 100
Max load Kg 600
STROKES:
Longitudinal X axis...
PRESS OMCN ART.280/RM
OMCN
09740
HYDRAULIC WITH MOVABLE PISTON
Power Ton 300
Distance between frames mm 1500
Gap mm 910
Piston stroke mm 500
Rapid control unit flow rate at 1' lt....
09740
HYDRAULIC WITH MOVABLE PISTON
Power Ton 300
Distance between frames mm 1500
Gap mm 910
Piston stroke mm 500
Rapid control unit flow rate at 1' lt....
SLOTTING MACHINE GUSLOFF MM. 800
SPARK ERODER CHARMILLES
CHARMILLES
07969
CHARMILLES ROBOFORM 40
CNC EROWA IS 50
Tank dimensions mm 1220x795x465
Table dimension mm 750x500
Workpiece weight kg 1000
Axis travel X mm 500...
07969
CHARMILLES ROBOFORM 40
CNC EROWA IS 50
Tank dimensions mm 1220x795x465
Table dimension mm 750x500
Workpiece weight kg 1000
Axis travel X mm 500...
VERTICAL HONNG MACHINE
06614
Stroke mm 1200
Working diameter mm 60-230
USED MACHINE
Stroke mm 1200
Working diameter mm 60-230
USED MACHINE
VERTICAL MACHINE CENTER SIGMA
SIGMA
08029
MISSION 1-P
CNC FANUC O-M
PALLET CHANGE: N. 2
Pallet surface mm 600x400
Distance spindle nose/pallet mm 150/600
Max load on pallet Kg...
08029
MISSION 1-P
CNC FANUC O-M
PALLET CHANGE: N. 2
Pallet surface mm 600x400
Distance spindle nose/pallet mm 150/600
Max load on pallet Kg...
VERTICAL MACHINE CENTER SIGMA
SIGMA
08033
MISSION 3
CNC Selca 3045
TABLE
Working surface mm 1150x500
Max load Kg 1000
TRAVEL
Axis X mm 1000
Axis Y mm 500
Axis Z mm 550
Distance spindle...
08033
MISSION 3
CNC Selca 3045
TABLE
Working surface mm 1150x500
Max load Kg 1000
TRAVEL
Axis X mm 1000
Axis Y mm 500
Axis Z mm 550
Distance spindle...
.jpeg)
5 AXIS MACHINING CENTER FIDIA K165 WITH EXTRACTION SYSTEM
FIDIA
10184
CNC control FIDIA C1
X-axis 1,000 mm
Y-axis 620 mm
Z-axis 500 mm
Linear axis speed X Y 40 m/min Z 30 m/min
5-axis head 32,000 rpm
B-axis -25° /...
10184
CNC control FIDIA C1
X-axis 1,000 mm
Y-axis 620 mm
Z-axis 500 mm
Linear axis speed X Y 40 m/min Z 30 m/min
5-axis head 32,000 rpm
B-axis -25° /...
.jpeg)
CENTER DECKEL MAHO DMC 63
DECKEL MAHO
08774
CNC HEIDENHAIN TNC 426
STROKES:
X axis 630 mm
Y axis 500 mm
Z axis 500 mm
TABLE:
Table surface with T-slots DIN 650-14 mm 800x500
Max load on the...
08774
CNC HEIDENHAIN TNC 426
STROKES:
X axis 630 mm
Y axis 500 mm
Z axis 500 mm
TABLE:
Table surface with T-slots DIN 650-14 mm 800x500
Max load on the...
CENTER FAMUP MC60
FAMUP
09649
CNC SELCA S4045PD
Dimensions mm 800x375
T-slots 3
T-slots width mm 14
T-slots distance mm 125
Max load Kg 250
STROKES:
Longitudinal X axis mm 600...
09649
CNC SELCA S4045PD
Dimensions mm 800x375
T-slots 3
T-slots width mm 14
T-slots distance mm 125
Max load Kg 250
STROKES:
Longitudinal X axis mm 600...
CENTER POSHTECH MOD. JM450
POSHTEC
09735
CNC FANUC Oi-MC
X axis 450 mm
Y axis 350 mm
Z axis 350 mm
Table dimensions 550x300 mm
Number of tools 10
Spindle taper toolholders BT 30 BT / SK /...
09735
CNC FANUC Oi-MC
X axis 450 mm
Y axis 350 mm
Z axis 350 mm
Table dimensions 550x300 mm
Number of tools 10
Spindle taper toolholders BT 30 BT / SK /...
LATHE GRAZIANO SAG 24NC
GRAZIANO
10448
CNC FAGOR 8055
Height of centers 500 mm
Distance between centers 2000 mm
Bar passage 114 mm
Diameter over carriage 660 mm
Bed width 600...
10448
CNC FAGOR 8055
Height of centers 500 mm
Distance between centers 2000 mm
Bar passage 114 mm
Diameter over carriage 660 mm
Bed width 600...
LATHE LEADWELL MOD. T-8SM
LEADWELL
10187
LIVE TOOLS
COUNTER SPINDLE
CNC FANUC 18i-TB
CAPACITY:
Max swing diameter mm 600
Swing diameter over cross slide mm 550
Max turning diameter mm...
10187
LIVE TOOLS
COUNTER SPINDLE
CNC FANUC 18i-TB
CAPACITY:
Max swing diameter mm 600
Swing diameter over cross slide mm 550
Max turning diameter mm...
LATHE SAFOP LEONARD 40-510
SAFOP
10089
CAPACITA'
height of center mm 600
max turning diameter mm 1.200
Max diameter on carriage mm 840
Distance between center mm 3.000
SPINDLE
spindle bore...
10089
CAPACITA'
height of center mm 600
max turning diameter mm 1.200
Max diameter on carriage mm 840
Distance between center mm 3.000
SPINDLE
spindle bore...
MILLING FAGIMA MMO 160
FAGIMA
10218
CNC ECS
TABLE:
Work surface 1950x650 mm
T-slot distance 120 mm
Number of T-slots 5
Max table load 4500 kg
STROKES:
X-axis longitudinal 1600 mm
Y-axis...
10218
CNC ECS
TABLE:
Work surface 1950x650 mm
T-slot distance 120 mm
Number of T-slots 5
Max table load 4500 kg
STROKES:
X-axis longitudinal 1600 mm
Y-axis...
MOULDING TEST REIS
REIS
09868
Max pressure KN 1000
Removable lower plate mm 1550x1800
Tiltable upper plate mm 1550x1800
Max mould weight N 150,000
Load capacity of rotating plate...
09868
Max pressure KN 1000
Removable lower plate mm 1550x1800
Tiltable upper plate mm 1550x1800
Max mould weight N 150,000
Load capacity of rotating plate...
PIPE EXTRACTOR
EHA
09634
Spindle diameter min 400 mm
Spindle diameter max 800 mm
Extraction length 8,000 mmm
Maximum extraction force for 60 mm diameter spindle: 210 kN (90...
09634
Spindle diameter min 400 mm
Spindle diameter max 800 mm
Extraction length 8,000 mmm
Maximum extraction force for 60 mm diameter spindle: 210 kN (90...
TEMPERING FURNACE SIATEM GENSIC-30
SIATEM
10422
Three-phase power supply plus neutral 400V 50Hz
Auxiliary circuit voltage 24VDC
Useful power 30KW
Rated frequency ±300KHz
Maximum current drawn...
10422
Three-phase power supply plus neutral 400V 50Hz
Auxiliary circuit voltage 24VDC
Useful power 30KW
Rated frequency ±300KHz
Maximum current drawn...
TUBE CUTTER
09608
Siemens control
Tip height 900 mm
Workpiece length max 8,000 mm
Workpiece length min 2,800 mm
Pneumatic chuck diameter 400 mm
No.2 Abrasive blades...
Siemens control
Tip height 900 mm
Workpiece length max 8,000 mm
Workpiece length min 2,800 mm
Pneumatic chuck diameter 400 mm
No.2 Abrasive blades...
DRILLING BOMAC MOD. 3050x16/1
BOMAC
10080
50x1600 mm
ELECTROHYDRAULIC CLAMPING
Max drilling capacity 50 mm
Tapping capacity mm 24
Distance spindle axis/column min/max mm 350-1600
Head travel...
10080
50x1600 mm
ELECTROHYDRAULIC CLAMPING
Max drilling capacity 50 mm
Tapping capacity mm 24
Distance spindle axis/column min/max mm 350-1600
Head travel...
DRILLING BOMAC RD 3050X16/1
BOMAC
09435
50x1600 mm
WITH ELECTROHYDRAULIC CLAMPING
Max drilling capacity 50 mm
Tapping capacity mm 24
Distance spindle axis/column min/max mm 350-1600
Head...
09435
50x1600 mm
WITH ELECTROHYDRAULIC CLAMPING
Max drilling capacity 50 mm
Tapping capacity mm 24
Distance spindle axis/column min/max mm 350-1600
Head...
C-FRAME PRESSES
ROSS
10002
Nominal force: kN 500
Min./max. slide stroke: mm 8÷100
Max. slide adjustment closed height: 70/275
Speed: c/min. 90
Clutch pressure: Bar 5.5
Motor...
10002
Nominal force: kN 500
Min./max. slide stroke: mm 8÷100
Max. slide adjustment closed height: 70/275
Speed: c/min. 90
Clutch pressure: Bar 5.5
Motor...
GRINDING PREZIOSA MM.1500
PREZIOSA
New01616
MOD.220x1500
COMPLETE WITH ACCESSORIES
GRINDING WHEELS MM.750X250
MATR. NR.57/90
USED MACHINE
New01616
MOD.220x1500
COMPLETE WITH ACCESSORIES
GRINDING WHEELS MM.750X250
MATR. NR.57/90
USED MACHINE
GUILLOTINE SHEAR COMALL MOD. C15x3000
COMAL
08836
Cutting lenght mm 3000
Distance between center mm 3050
Gap mm 500
Max cutting thickness mm 15
Backgauge stroke mm 1000
Pump motor power kW...
08836
Cutting lenght mm 3000
Distance between center mm 3050
Gap mm 500
Max cutting thickness mm 15
Backgauge stroke mm 1000
Pump motor power kW...
VERTICAL CENTER ZPS MCFV 100
ZPS
09297
CNC SELCA 3045
Table surface 1270x605 mm
Max table load Kg 900
Axis X 1024 mm
Axis Y 610 mm
Axis Z 635 mm
Spindle speed rpm 8000
Spindle taper ISO...
09297
CNC SELCA 3045
Table surface 1270x605 mm
Max table load Kg 900
Axis X 1024 mm
Axis Y 610 mm
Axis Z 635 mm
Spindle speed rpm 8000
Spindle taper ISO...
MILLING BOMAC MOD. 858II
BOMAC
10420
TABLE AND STROKES:
Table dimensions 1370x305 mm
Manual longitudinal stroke 800 mm
Manual cross stroke 380 mm
Vertical shelf stroke 406 mm
HEAD AND...
10420
TABLE AND STROKES:
Table dimensions 1370x305 mm
Manual longitudinal stroke 800 mm
Manual cross stroke 380 mm
Vertical shelf stroke 406 mm
HEAD AND...
.jpg)
LATHE BOMAC SFC 210x1500
BOMAC
10366
AUTRON LUX SFC 210x1500
TECHNICAL AND CONSTRUCTION CHARACTERISTICS:
Height of center mm 210
Swing diameter on the bed mm 420
Swing diameter in the...
10366
AUTRON LUX SFC 210x1500
TECHNICAL AND CONSTRUCTION CHARACTERISTICS:
Height of center mm 210
Swing diameter on the bed mm 420
Swing diameter in the...
BORING MACHINE SUPER PROGRESS 580
GRINDING LODI MOD. T8050 CN
LODI
09672
Max longitudinal stroke of the table 920 mm
Max cross stroke 500 mm
Grinding length 800 mm
Grinding width 500 mm
Worktop dimensions 800x450...
09672
Max longitudinal stroke of the table 920 mm
Max cross stroke 500 mm
Grinding length 800 mm
Grinding width 500 mm
Worktop dimensions 800x450...
MILLING MOMAC MOD. FU1S
MOMAC
08178
TABLE:
Table dimensions mm 1200x250
T-slots number 3-14 H7
T-slots distance mm 63
STROKES:
Longitudinal automatic mm 900
Cross automatic mm...
08178
TABLE:
Table dimensions mm 1200x250
T-slots number 3-14 H7
T-slots distance mm 63
STROKES:
Longitudinal automatic mm 900
Cross automatic mm...
.jpeg)
BORING CERUTI ABC 75
BORING SAN ROCCO MEC 4
SAN ROCCO
06744
BI-ROTARY HEAD
VISUALIZED
TABLE:
Rotary table dimensions mm 1200x1500
Longitudinal stroke mm 1600
Cross stoke mm 2100
Table load Kg...
06744
BI-ROTARY HEAD
VISUALIZED
TABLE:
Rotary table dimensions mm 1200x1500
Longitudinal stroke mm 1600
Cross stoke mm 2100
Table load Kg...
CENTER FEELER FV1000
FEELER
08607
CNC FANUC OM-D
TRAVELS:
Axis X mm 1000
Axis Y mm 450
Axis Z mm 505
TABLE:
Table dimensions mm 475x1100
Load max Kg 500
SPINDLE:
Spindle speed rpm...
08607
CNC FANUC OM-D
TRAVELS:
Axis X mm 1000
Axis Y mm 450
Axis Z mm 505
TABLE:
Table dimensions mm 475x1100
Load max Kg 500
SPINDLE:
Spindle speed rpm...
CENTER PARPAS MOD. P11A
PARPAS
09867
CNC FANUC 0MC
Axis X stroke 1100 mm
Axis Y stroke 550 mm
Axis Z stroke 600 mm
Spindle taper ISO 40
Spindle speed rpm 8000
Tool change 24...
09867
CNC FANUC 0MC
Axis X stroke 1100 mm
Axis Y stroke 550 mm
Axis Z stroke 600 mm
Spindle taper ISO 40
Spindle speed rpm 8000
Tool change 24...
.jpeg)
COUPLE OF ANGULAR PLATE 1000X3000
10387
Width 1.000 mm
Depth 1.200 mm
Height 3.000 mm
USED EQUIPMENT
Width 1.000 mm
Depth 1.200 mm
Height 3.000 mm
USED EQUIPMENT
.JPG)
DRILL SASS TRMH 3000
SASS
10134
RADIAL DRILL SASS mod. TRL 1600
Max. working diameter 90/110 mm
Max. spindle/column centre distance 3,020 mm
Min. drilling radius 695 mm
Max....
10134
RADIAL DRILL SASS mod. TRL 1600
Max. working diameter 90/110 mm
Max. spindle/column centre distance 3,020 mm
Min. drilling radius 695 mm
Max....
EXTERNAL GRINDING CINCINNATI MT.2
CINCINNATI
RTF.EST.O178
STROKE MM.2000
HEIGHT OF CENTRE MM.300
DIAMETER GRINDING WHEEL MM.600
OVERALL SIZE: MM 5400X2700X H1600
USED MACHINE
RTF.EST.O178
STROKE MM.2000
HEIGHT OF CENTRE MM.300
DIAMETER GRINDING WHEEL MM.600
OVERALL SIZE: MM 5400X2700X H1600
USED MACHINE
GRINDING GANTRY WMW
WMW
New04386
AXIS X MM.7000
PASSAGE BETWEEN FRAMES MM.1650
TABLE MM.1100X5000
STROKE TRAVERSAL MM 1100
LIGHT MM 1200
GRINDING HEAD ORIENTABLE 5,5 HP CORSA 400...
New04386
AXIS X MM.7000
PASSAGE BETWEEN FRAMES MM.1650
TABLE MM.1100X5000
STROKE TRAVERSAL MM 1100
LIGHT MM 1200
GRINDING HEAD ORIENTABLE 5,5 HP CORSA 400...
.jpeg)
GRINDING MACHINE
09360
X axis travel 650 mm
Y axis travel 400 mm
Z axis travel 250 mm
Grinding surface 500x300 mm
Max distance between wheel center and table top mm...
X axis travel 650 mm
Y axis travel 400 mm
Z axis travel 250 mm
Grinding surface 500x300 mm
Max distance between wheel center and table top mm...
GRINDING MININI MOD. TH-PL 8.6
MININI
08639
Wheel dimensions mm 300x50
Axis X stroke mm 800
Axis Y stroke mm 600
Axis Z stroke mm 450
EQUIPPED WITH:
-Diamond dresser
USED MACHINE
08639
Wheel dimensions mm 300x50
Axis X stroke mm 800
Axis Y stroke mm 600
Axis Z stroke mm 450
EQUIPPED WITH:
-Diamond dresser
USED MACHINE
.JPG)
KAESER CSD 125 SFC COMPRESSOR
KAESER
10195
With variable speed control (SFC)
Maximum operating pressure: 8.5 bar
Free Air Delivery (FAD): 2.84 to 12.00 m³/min
Motor power: 75 kW
Compressed...
10195
With variable speed control (SFC)
Maximum operating pressure: 8.5 bar
Free Air Delivery (FAD): 2.84 to 12.00 m³/min
Motor power: 75 kW
Compressed...
LATHE GILDEMEISTER CTX600
GILDEMEISTER
08067
CNC PHILIPS 432
Max swing diameter mm 650
Max turning diameter mm 480
Max turning lenght 1000 mm
Axis X mm 320
Axis Z mm 1097
Spindle bore mm...
08067
CNC PHILIPS 432
Max swing diameter mm 650
Max turning diameter mm 480
Max turning lenght 1000 mm
Axis X mm 320
Axis Z mm 1097
Spindle bore mm...
.jpeg)
LATHE OMG ZANOLETTI CNA 325
OMG ZANOLETTI
09621
CNC FAGOR 8055
Diameter on the carriage 430 mm
Distance between centers 1500
Bar passaging 105 mm
Spindle taper CAMLOCK 8''
EQUIPPED...
09621
CNC FAGOR 8055
Diameter on the carriage 430 mm
Distance between centers 1500
Bar passaging 105 mm
Spindle taper CAMLOCK 8''
EQUIPPED...
MEASURING MACHINE
RUPAC
09885
MOD. INSPECVISTA 3020A
X-axis travel mm 300
Y-axis travel mm 200
Z-axis travel mm 200
Type of swan neck structure
Structure composition...
09885
MOD. INSPECVISTA 3020A
X-axis travel mm 300
Y-axis travel mm 200
Z-axis travel mm 200
Type of swan neck structure
Structure composition...
MEASURING MACHINE MITUTOYO
MITUTOYO
09058
THREE-DIMENSIONAL MOD. EURO C-7106
Dimensions mm 700x600x1000
EQUIPPED WITH:
-RENISHAWPH10T MOTORIZED HEAD
-PC
USED MACHINE
09058
THREE-DIMENSIONAL MOD. EURO C-7106
Dimensions mm 700x600x1000
EQUIPPED WITH:
-RENISHAWPH10T MOTORIZED HEAD
-PC
USED MACHINE
MILLING AUERBACH FBE 1200
AVERBACH
09647
CNC SELCA 3045
TABLE:
Size 1300x600
T-slots 5
Widht T-slots mm 18H8
Distance T-slots mm 100
Laod 2.000 kg
STROKES:
X axis longitudinal 1200 mm
Y...
09647
CNC SELCA 3045
TABLE:
Size 1300x600
T-slots 5
Widht T-slots mm 18H8
Distance T-slots mm 100
Laod 2.000 kg
STROKES:
X axis longitudinal 1200 mm
Y...
MILLING OMV PARPAS FAS-2P
PARPAS
09207
CNC HEIDENHAIN 355Q
Longitudinal mm 920
Cross stroke mm 620
Vertical stroke mm 520
Manual tilting rotary table
Surface table mm
Dualspindle milling...
09207
CNC HEIDENHAIN 355Q
Longitudinal mm 920
Cross stroke mm 620
Vertical stroke mm 520
Manual tilting rotary table
Surface table mm
Dualspindle milling...
MILLING RAMBAUDI RAMMATIC
RAMBAUDI
07798
CNC FIDIA C1
AXIS STROKES
Axis X (longitudinal) mm 2030
Axis Y (cross) mm 800
Axis Z (vertical) mm 915
Quill stroke mm 150
TABLE
Lenght mm...
07798
CNC FIDIA C1
AXIS STROKES
Axis X (longitudinal) mm 2030
Axis Y (cross) mm 800
Axis Z (vertical) mm 915
Quill stroke mm 150
TABLE
Lenght mm...
PUNCHING TRUMPF
TRUMPF
07124
MOD. TRUMATIC 120 ROTATION
Punching capacity 150 kN
Table size mm 1000x1000
Weight machine Kg 4300
Equipped with:
-N.15 punches various...
07124
MOD. TRUMATIC 120 ROTATION
Punching capacity 150 kN
Table size mm 1000x1000
Weight machine Kg 4300
Equipped with:
-N.15 punches various...
SPARK ERODER ONA TECNO H600
ONA
09651
TABLE:
Tank size mm 1700x1000x600
Table dimensions mm 1200x800
Max table load Kg 4000
Max height piece mm 530
CROSS TABLE:
Longitudinal X stroke mm...
09651
TABLE:
Tank size mm 1700x1000x600
Table dimensions mm 1200x800
Max table load Kg 4000
Max height piece mm 530
CROSS TABLE:
Longitudinal X stroke mm...
SURFACE GRINDING MACHINE
DELTA
09968
MODEL Synthesis 1300/600 Auto
Maximum grinding surface: 1.100 x 600 mm
Distance between spindle axis and table surface: 600 mm (800 mm with...
09968
MODEL Synthesis 1300/600 Auto
Maximum grinding surface: 1.100 x 600 mm
Distance between spindle axis and table surface: 600 mm (800 mm with...
.jpg)
LATHE BOMAC SFC 210x1000
BOMAC
10365
AUTRON LUX SFC 210x1000
TECHNICAL AND CONSTRUCTION CHARACTERISTICS:
Height of center mm 210
Swing diameter on the bed mm 420
Swing diameter in the...
10365
AUTRON LUX SFC 210x1000
TECHNICAL AND CONSTRUCTION CHARACTERISTICS:
Height of center mm 210
Swing diameter on the bed mm 420
Swing diameter in the...
DRILLING BOMAC MOD. 3040x10/1
BOMAC
10078
40x1000 mm
WITH ELECTROMECHANICAL
Max drilling capacity 40 mm
Tapping capacity mm 22
Distance spindle axis/column min/max mm 300-1000
Head travel on...
10078
40x1000 mm
WITH ELECTROMECHANICAL
Max drilling capacity 40 mm
Tapping capacity mm 22
Distance spindle axis/column min/max mm 300-1000
Head travel on...
.jpeg)
ANGULAR PLATE 1000x2500
10326
Dimension mm 1.000 x 1.200 x 2.500
N.02 available
USED EQUIPMENT
Dimension mm 1.000 x 1.200 x 2.500
N.02 available
USED EQUIPMENT
CENTER HURCO VMX 30
HURCO
08921
CNC ULTIMAX
TABLE:
Table surface mm 1020x510
T-slots number 5
Widht/Distance T-slots mm 18/100
Load capacity Kg 1360
STROKES:
Axis X mm 760
Axis Y mm...
08921
CNC ULTIMAX
TABLE:
Table surface mm 1020x510
T-slots number 5
Widht/Distance T-slots mm 18/100
Load capacity Kg 1360
STROKES:
Axis X mm 760
Axis Y mm...
CENTER MIND DART
MIND
08814
MOD. VMC 1000 A - TWIN SPPED
CNC FANUC 18 MC
TABLE:
Working surface mm 1220x500
Max load Kg 1500
CORSE:
Axis X longitudinal stroke mm 1100
Axis Y...
08814
MOD. VMC 1000 A - TWIN SPPED
CNC FANUC 18 MC
TABLE:
Working surface mm 1220x500
Max load Kg 1500
CORSE:
Axis X longitudinal stroke mm 1100
Axis Y...
CENTER SAMSUNG MOD. LCV 50 A
SAMSUNG
06979
CNC MITSUBISHI
-Table working surface mm 1000x520
-Table T-slot (widthxIntrevalxn.) 18H8x110x5
-Axis X mm 800
-Axis Y mm 520
-Axis Z mm 500
-Distance...
06979
CNC MITSUBISHI
-Table working surface mm 1000x520
-Table T-slot (widthxIntrevalxn.) 18H8x110x5
-Axis X mm 800
-Axis Y mm 520
-Axis Z mm 500
-Distance...
CENTER ZPS MCFV 100
ZPS
09292
CNC HEIDENHAIN 415
Table surface 1270x605 mm
Table load Kg 900
X axis travel 1020 mm
Y axis travel 610 mm
Z axis travel 635 mm
Spindle speed rpm...
09292
CNC HEIDENHAIN 415
Table surface 1270x605 mm
Table load Kg 900
X axis travel 1020 mm
Y axis travel 610 mm
Z axis travel 635 mm
Spindle speed rpm...
GRINDING SURFACE FAVRETTO MOD. TC 250
FAVRETTO
New04132
MAX GRINDING LENGHT MM.2500
MAX GRINDING LENGHT WITH LARGE WHEEL 75 MM.575
MAX GRINDING HEIGHT MM.450
SIZE ELECTROPERMANENT MAGNETIC TABLE...
New04132
MAX GRINDING LENGHT MM.2500
MAX GRINDING LENGHT WITH LARGE WHEEL 75 MM.575
MAX GRINDING HEIGHT MM.450
SIZE ELECTROPERMANENT MAGNETIC TABLE...
GRINDING ZOCCA 2000/3
ZOCCA
07412
Height of center mm 180
Diameter max grinding mm 360
Distance between centre mm 2000
Head rotation +/-45 degrees
Spindle motor speed 2 ranges:...
07412
Height of center mm 180
Diameter max grinding mm 360
Distance between centre mm 2000
Head rotation +/-45 degrees
Spindle motor speed 2 ranges:...
MEASURING ARM FARO
FARO
09296
EDGE CAM2
7 AXIS
PERFORMANCE SPECIFICATIONS:
Measuring range m 2,7
Volumetric accuracy mm +/- 0,041
Single point repeatability mm 0,029
FaroArm...
09296
EDGE CAM2
7 AXIS
PERFORMANCE SPECIFICATIONS:
Measuring range m 2,7
Volumetric accuracy mm +/- 0,041
Single point repeatability mm 0,029
FaroArm...
SHARPENING NESI GRINDER 400S
NESI
09214
UNIVERSAL
LONGITUDINAL TABLE:
Stroke 400 mm
Work table length 800 mm
Work table width mm 105
Workpiece table rotation 360 degree
GRINDING...
09214
UNIVERSAL
LONGITUDINAL TABLE:
Stroke 400 mm
Work table length 800 mm
Work table width mm 105
Workpiece table rotation 360 degree
GRINDING...
PRESS LEGNANI T80 FNAR
LEGNANI
09936
C-FRAME PRESSES
Nominal force: kN 800
Weight: Kg. 5.000
Nominal number of strokes: 60 min.
Operating air pressure: BAR 5.5÷6
Installed power: 4...
09936
C-FRAME PRESSES
Nominal force: kN 800
Weight: Kg. 5.000
Nominal number of strokes: 60 min.
Operating air pressure: BAR 5.5÷6
Installed power: 4...
CENTER BOMAC CFM 1100
BOMAC
09432
CNC HEIDENHAIN
TABLE:
Dimensions mm 1300x500
Max load Kg 900
T-slots N.5 mm 18x100
STROKES:
Axis X mm 1100
Axis Y mm 550
Axis Z mm 560
Max distance...
09432
CNC HEIDENHAIN
TABLE:
Dimensions mm 1300x500
Max load Kg 900
T-slots N.5 mm 18x100
STROKES:
Axis X mm 1100
Axis Y mm 550
Axis Z mm 560
Max distance...
CENTER DAEWOO MOD. ACE V35
DAEWOO
08890
ROTOPALLET
CNC FANUC OM
STROKES:
Axis X stroke mm 560
Axis Y stroke mm 400
Axis Z stroke mm 460
Distance between spindle nose to table surface mm...
08890
ROTOPALLET
CNC FANUC OM
STROKES:
Axis X stroke mm 560
Axis Y stroke mm 400
Axis Z stroke mm 460
Distance between spindle nose to table surface mm...
CENTER MAXIMART MOD. VMC850
MAXIMART
07122
CNC SIEMENS SINUMERIK
-Table size mm 1000x450
-T-slot mm 18x3
-Axix X travel mm 850
-Axis Y travel mm 500
-Axis Z travel mm 500
-Distance between...
07122
CNC SIEMENS SINUMERIK
-Table size mm 1000x450
-T-slot mm 18x3
-Axix X travel mm 850
-Axis Y travel mm 500
-Axis Z travel mm 500
-Distance between...
LATHE CMT SUPER URSUS 280
CMT
08555
CAPACITY:
Height of centre mm 280
Max diameter over bed mm 560
Max diameter over slide mm 305
Distance between centre mm 1500
AXIS:
Axis Z mm...
08555
CAPACITY:
Height of centre mm 280
Max diameter over bed mm 560
Max diameter over slide mm 305
Distance between centre mm 1500
AXIS:
Axis Z mm...
.JPG)
LATHE GIANA 360x1800
GIANA
08959
HEIGHT OF CENTER ON BED MM 360
HEIGHT OF CENTER ON CARRIAGE MM 240
HEIGHT OF CENTER ON GAP MM 450
DISTANCE BETWEEN CENTER MM 1800
WIDTH BED MM...
08959
HEIGHT OF CENTER ON BED MM 360
HEIGHT OF CENTER ON CARRIAGE MM 240
HEIGHT OF CENTER ON GAP MM 450
DISTANCE BETWEEN CENTER MM 1800
WIDTH BED MM...
LATHE WALDEGG 550x1400
WALDEGG
07813
Height of center mm 550
Carriage stroke mm 850
Distance between center mm 3000
Turning lenght mm 1800
Turning diameter open bed mm 1700
Turning...
07813
Height of center mm 550
Carriage stroke mm 850
Distance between center mm 3000
Turning lenght mm 1800
Turning diameter open bed mm 1700
Turning...
MILLING GEMI MOD. FU 1600
GEMI
09893
Table dimensions mm 1600x410
X-axis stroke mm 1400
Y-axis stroke mm 360
Z-axis stroke mm 500
Spindle taper ISO 50
Spindle rotation speed n.12 - rpm...
09893
Table dimensions mm 1600x410
X-axis stroke mm 1400
Y-axis stroke mm 360
Z-axis stroke mm 500
Spindle taper ISO 50
Spindle rotation speed n.12 - rpm...
PERFORATED CUBE 1300x1520x900
10334
Dimension mm 1.300 x 1.520 x 900
Base 1.500 x 1.500 thickness 90 mm
USED EQUIPMENT
Dimension mm 1.300 x 1.520 x 900
Base 1.500 x 1.500 thickness 90 mm
USED EQUIPMENT
PRESS BRAKE RIBOLDI MOD. H150.40
RIBOLDI
09322
TON. 150
Length 4050 mm
Gap 350 mm
Stroke mm 220
Approach speed mm/s 50
Working speed mm/s 6
Return speed mm/s 45
Motor power kw 11
Approximate...
09322
TON. 150
Length 4050 mm
Gap 350 mm
Stroke mm 220
Approach speed mm/s 50
Working speed mm/s 6
Return speed mm/s 45
Motor power kw 11
Approximate...
.jpeg)
PUNCHING SHEAR MACHINE GEKA
GEKA
09690
MOD. HYDRACOP 165S
HYDRAULIC
INCREASED SPEED
-GEKA CNC positioning table mod. SEMYPAX 1000x400
-New CNC for driving the positioning table
Flat bars...
09690
MOD. HYDRACOP 165S
HYDRAULIC
INCREASED SPEED
-GEKA CNC positioning table mod. SEMYPAX 1000x400
-New CNC for driving the positioning table
Flat bars...
SAW BAND IMET MOD. X-TECH 320
IMET
08437
AUTOMATIC CNC
Round cutting capacity tondo mm 320
Square cutting capacity mm 320
Rectangle cutting capacity mm 320x320
Blade motor power kW 3
Blade...
08437
AUTOMATIC CNC
Round cutting capacity tondo mm 320
Square cutting capacity mm 320
Rectangle cutting capacity mm 320x320
Blade motor power kW 3
Blade...
BENDER PROFILE MACHINE ADRIA MACHINE
ADRIATICA INDUSTRIALE
09258
MOD. APK 61
Shaft diameter mm 60
Roller diameter mm 177
Speed m/min 6,4
Working voltage V 380-415
Frequency Hz 50
Engine kW 4
Machine dimensions...
09258
MOD. APK 61
Shaft diameter mm 60
Roller diameter mm 177
Speed m/min 6,4
Working voltage V 380-415
Frequency Hz 50
Engine kW 4
Machine dimensions...
PRESS GALATO T35 TL/V-SM
GALATO
09935
C-FRAME PRESSES
Nominal force: kN 350
Adjustable stroke: mm 11÷78
Strokes per minute: n°122
Slide adjustment: mm 50
Light at bottom dead centre:...
09935
C-FRAME PRESSES
Nominal force: kN 350
Adjustable stroke: mm 11÷78
Strokes per minute: n°122
Slide adjustment: mm 50
Light at bottom dead centre:...
LATHE CAZENEUVE 260X1100
CAZENUEVE
07630
MOD. 590HBY
Height of center mm 260
Swing diameter over bed mm 583
Swing diameter over carriage mm 300
Distance between center mm 1100
Bed width mm...
07630
MOD. 590HBY
Height of center mm 260
Swing diameter over bed mm 583
Swing diameter over carriage mm 300
Distance between center mm 1100
Bed width mm...
LATHE CNC GRAZIANO MT 400C
GRAZIANO
08065
CNC Heidenhain 532T
WORKING RANGE:
Max swing diameter mm 430
Max turning diameter mm 300
Max diameter over slide mm 265
Distance centre mm...
08065
CNC Heidenhain 532T
WORKING RANGE:
Max swing diameter mm 430
Max turning diameter mm 300
Max diameter over slide mm 265
Distance centre mm...
LATHE GRAZIANO MOD. GT 700 C
GRAZIANO
09537
C AXIS
LIVE TOOLS
CNC Fagor 8055
CAPACITA'
Max diameter over bedmm 720
Max diameter over carriage mm 460
Max turning diameter mm 590
Distance...
09537
C AXIS
LIVE TOOLS
CNC Fagor 8055
CAPACITA'
Max diameter over bedmm 720
Max diameter over carriage mm 460
Max turning diameter mm 590
Distance...
PRESS OLEODYNAMIC OMF 250 TON.
.jpeg)
SAW BAND FORTE MOD.SBA 241/S
FORTE
10054
Round cutting capacity mm 250
Square cutting capacity mm 250x250
Belt dimensions mm 4100x32x1.1
Belt motor power kW 3
Blade rotation speed m/min....
10054
Round cutting capacity mm 250
Square cutting capacity mm 250x250
Belt dimensions mm 4100x32x1.1
Belt motor power kW 3
Blade rotation speed m/min....
.JPG)
SHEAR MORGEN HGA 25 / 6
MORGEN
10137
Cutting length mm 2.500
Cutting thickness mm 6
Max cutting power KN 218
Back gauge travel mm 750
Cutting angle adjustment degrees 1.5
Strokes per...
10137
Cutting length mm 2.500
Cutting thickness mm 6
Max cutting power KN 218
Back gauge travel mm 750
Cutting angle adjustment degrees 1.5
Strokes per...
SURFACE GRINDING CAMUT MINI 12
CAMUT
10135
Longitudinal travel X-axis mm 1.330
Vertical travel Z-axis mm 300
Cross travel Y-axis mm 400
Max grinding length mm 1.200
Max grinding height mm...
10135
Longitudinal travel X-axis mm 1.330
Vertical travel Z-axis mm 300
Cross travel Y-axis mm 400
Max grinding length mm 1.200
Max grinding height mm...
BENDING MACHINE BPR BA35 CNC
BPR
06926
A CNC
Shafts diameter 35 mm
Useful shaft length 60 mm
Driving rollers 3
Max insertion height 95 mm
Working height at the center of the trees 825...
06926
A CNC
Shafts diameter 35 mm
Useful shaft length 60 mm
Driving rollers 3
Max insertion height 95 mm
Working height at the center of the trees 825...
CENTER FADAL VMC 4020HT MOD. 906-1
FADAL
10129
CNC SELCA S3045P
Table dimensions mm 1217x508
Distance floor/table surface mm 787
T-slots 5x17,45x95,25 mm
Max table load Kg 680
Axis X mm 1016
Axis...
10129
CNC SELCA S3045P
Table dimensions mm 1217x508
Distance floor/table surface mm 787
T-slots 5x17,45x95,25 mm
Max table load Kg 680
Axis X mm 1016
Axis...
GRINDING CHEVALIER FSG-1224ADII
CHEVALIER
10196
Table dimensions mm 300x600
Max grinding length mm 610
Max grinding width mm 305
Max distance between table surface and spindle center mm 630
Max...
10196
Table dimensions mm 300x600
Max grinding length mm 610
Max grinding width mm 305
Max distance between table surface and spindle center mm 630
Max...
HEAD ISO 50 IDEXING 2,5°
08888
A axis indexing 144x2.5 degrees
B axis indexing 144x2.5 degrees
USED MATERIAL
A axis indexing 144x2.5 degrees
B axis indexing 144x2.5 degrees
USED MATERIAL
LATHE CONVENTIONAL SAFOP 430x1500
SAFOP
New01503
MOD. PS-430
Height of center mm. 430
Max diameter swing over bed mm. 860
Max diameter swing over cross carriage mm. 720
Max diameter swing over gap...
New01503
MOD. PS-430
Height of center mm. 430
Max diameter swing over bed mm. 860
Max diameter swing over cross carriage mm. 720
Max diameter swing over gap...
MILLING CB FERRARI B13E
CB FERRARI
10046
CNC ELEXA E 500
TABLE:
Table surface mm 1200x400
5 T-slots mm 14
STROKES:
X-axis stroke mm 650
Y-axis stroke mm 320
Z-axis stroke mm...
10046
CNC ELEXA E 500
TABLE:
Table surface mm 1200x400
5 T-slots mm 14
STROKES:
X-axis stroke mm 650
Y-axis stroke mm 320
Z-axis stroke mm...
MOULDING TEST TCS 100 TON
TCS
08772
Closing force kN 1000
Opening force kN 400
Column diameter mm 120
Planes dimension mm 1000x1000
Upper plane rotation 110 degrees
Motor power kW...
08772
Closing force kN 1000
Opening force kN 400
Column diameter mm 120
Planes dimension mm 1000x1000
Upper plane rotation 110 degrees
Motor power kW...
POLLARD VERTICAL HONING MACHINE
PRESS ECCENTRIC C- TYPE COLOMBO AGOSTINO
COLOMBO
PRS.ECG.O245
MOD. AMERIA C40
WITH 6 GUIDES
Max pressue ton 40
Planes mm 880x480
Distance between centers mm 380
Stroke mm 125
Regulation vertical mm 65...
PRS.ECG.O245
MOD. AMERIA C40
WITH 6 GUIDES
Max pressue ton 40
Planes mm 880x480
Distance between centers mm 380
Stroke mm 125
Regulation vertical mm 65...
RADIAL DRILLING stankoimport TIPO 2A576
STANKO
New02636
HOLE DIAMETER MM.80
TRAVEL MM.2000
SPINDLE TURNING 1200
HYDRAULIC BLOCKING
USED MACHINE
New02636
HOLE DIAMETER MM.80
TRAVEL MM.2000
SPINDLE TURNING 1200
HYDRAULIC BLOCKING
USED MACHINE
TRIMMING BEADING MACHINE PB ENGINEERING RIP 400
PB ENGINEERING
10393
ELECTRIC MOTOR
Three-phase motor 380V/50Hz
Power 5.9-3.7 kW
Revolutions 1400-900 rpm
SPEED GEAR CHANGE
Manual mechanical gear
3 speed ratios (1:1,...
10393
ELECTRIC MOTOR
Three-phase motor 380V/50Hz
Power 5.9-3.7 kW
Revolutions 1400-900 rpm
SPEED GEAR CHANGE
Manual mechanical gear
3 speed ratios (1:1,...
.JPG)
BRA LOADER IEMCA
IEMCA
09402
MOD. MASTER 880/33 P
Round bar diameter min/max mm 8:80
Hexagonal bar diameter min/max mm 7:60
Max bar length mm 3300
Warehouse capacity:
-diam. mm...
09402
MOD. MASTER 880/33 P
Round bar diameter min/max mm 8:80
Hexagonal bar diameter min/max mm 7:60
Max bar length mm 3300
Warehouse capacity:
-diam. mm...
LATHE GRAZIANO SAG 20 260x2500
GRAZIANO
08903
Height of center on the bed mm 260
Height of center in the gap mm 330
Distance between center mm 2500
Spindle bore mm 52
Approx. overall dimensions...
08903
Height of center on the bed mm 260
Height of center in the gap mm 330
Distance between center mm 2500
Spindle bore mm 52
Approx. overall dimensions...
MILLING MOMAC MOD. FTV-2
MOMAC
10053
Table surface mm 1270x254
T-slots mm 3x16x63
Longitudinal stroke mm 700
Cross stroke mm 320
Vertical stroke mm 320
Ram stroke mm 570
Spindle motor...
10053
Table surface mm 1270x254
T-slots mm 3x16x63
Longitudinal stroke mm 700
Cross stroke mm 320
Vertical stroke mm 320
Ram stroke mm 570
Spindle motor...
MILLING SACHMAN RP
10438
Table dimensions 2000x600 mm
Longitudinal stroke 1800 mm
Cross stroke 775 mm
Vertical stroke 790 mm
Max distance between table surface and spindle...
Table dimensions 2000x600 mm
Longitudinal stroke 1800 mm
Cross stroke 775 mm
Vertical stroke 790 mm
Max distance between table surface and spindle...
PRESS ADIRA MOD.QHS-02012 CBP
ADIRA
09318
Maximum capacity kN 200
Max working length mm 1250
Max working thickness mm 4
Max tool length mm 1250
Passage between uprights mm 1020
Min/max stroke...
09318
Maximum capacity kN 200
Max working length mm 1250
Max working thickness mm 4
Max tool length mm 1250
Passage between uprights mm 1020
Min/max stroke...
PRESS BRAKE OMAG MOD. PHB 8056
OMAG
New04901
MM.6150x80 TON.
CNC SINTESI
Force 800 KN
Lenght 6150 mm
Distance between frames 5600 mm
Hollow 300 mm
Piston stroke 230 mm
Distance table - piston...
New04901
MM.6150x80 TON.
CNC SINTESI
Force 800 KN
Lenght 6150 mm
Distance between frames 5600 mm
Hollow 300 mm
Piston stroke 230 mm
Distance table - piston...
.jpeg)
PRESS GALDABINI 80 TON
GALDABINI
07435
TABLE MM 4150 X 450
DISTANCE COLUMN - CENTRE PISTON MM 280
PISTON DIAMETER MM 160
USED MACHINE
07435
TABLE MM 4150 X 450
DISTANCE COLUMN - CENTRE PISTON MM 280
PISTON DIAMETER MM 160
USED MACHINE
SPARK ERODER ONA DATIC D360
ONA
09653
TABLE:
Tank size mm 1200x800x380
Table dimensions mm 650x400
Max table load Kg 1100
CROSS TABLE:
Longitudinal X stroke mm 600
Cross Y stroke mm...
09653
TABLE:
Tank size mm 1200x800x380
Table dimensions mm 650x400
Max table load Kg 1100
CROSS TABLE:
Longitudinal X stroke mm 600
Cross Y stroke mm...
VERTICAL MACHINE CENTER ARES SEIKI
ARES SEIKI
09978
USED VERTICAL MACHINE CENTER TC 510
CNC FANUC 0-M
Longitudinal travel X-axis 510 mm
Transverse travel Y-axis 350 mm
Vertical travel Z-axis 460...
09978
USED VERTICAL MACHINE CENTER TC 510
CNC FANUC 0-M
Longitudinal travel X-axis 510 mm
Transverse travel Y-axis 350 mm
Vertical travel Z-axis 460...
WELDING POSITIONER PASSERINI MOD. ET30
PRESS IMS T25-VE
IMS
09934
C-FRAME PRESSES
Free passage between the uprights mm: 220
Distance between the connecting rod axis and the uprights (recess) mm: 160
Hammer...
09934
C-FRAME PRESSES
Free passage between the uprights mm: 220
Distance between the connecting rod axis and the uprights (recess) mm: 160
Hammer...
.jpeg)
5 AXIS CENTER DMG DMU 50T
DMG
10170
Numerical control Heidenhain
X-axis travel mm 500
Y-axis travel mm 400
Z-axis travel mm 400
Rotary-tilting table mm 700 x 500
Orientation +95 /...
10170
Numerical control Heidenhain
X-axis travel mm 500
Y-axis travel mm 400
Z-axis travel mm 400
Rotary-tilting table mm 700 x 500
Orientation +95 /...
.JPG)
BED TYPE MILLING SACHMAN Mod: S80
SACHMAN
09686
TABLE mm 1350 X 550
STROKE LONGITUDINAL mm 1200
STROKE TRASVERSAL mm 600
STROKE VERTICAL mm 650
STROKE QUILL mm 160
HEAD ROTATION +- 45...
09686
TABLE mm 1350 X 550
STROKE LONGITUDINAL mm 1200
STROKE TRASVERSAL mm 600
STROKE VERTICAL mm 650
STROKE QUILL mm 160
HEAD ROTATION +- 45...
CENTER CHIRON FZ18W
CHIRON
08881
CNC Siemens SINUMERIK 810M
N.2 pallet
Clamping surface mm 950x370
Max table load Kg 500
Axis X stroke mm 550
Axis Y stroke mm 300
Axis Z stroke mm...
08881
CNC Siemens SINUMERIK 810M
N.2 pallet
Clamping surface mm 950x370
Max table load Kg 500
Axis X stroke mm 550
Axis Y stroke mm 300
Axis Z stroke mm...
.JPG)
CENTER FEELER FV 600
FEELER
09684
CNC FANUC O-MD
TABLE:
Table size mm 400x800
T-slots mm 18x3x100
Table load capacity Kg 300
AXIS:
X axis mm 610
Y axis mm 500
Z axis mm 505...
09684
CNC FANUC O-MD
TABLE:
Table size mm 400x800
T-slots mm 18x3x100
Table load capacity Kg 300
AXIS:
X axis mm 610
Y axis mm 500
Z axis mm 505...
CENTER HAAS HCE 400P
HAAS
07632
CNC HAAS
WORKING AREA
Longitudinal axis X stroke mm 610
Vertical axis Y stroke mm 510
Cross axis Z stroke mm 560
ROTARY TABLE CN
N.2 pallet...
07632
CNC HAAS
WORKING AREA
Longitudinal axis X stroke mm 610
Vertical axis Y stroke mm 510
Cross axis Z stroke mm 560
ROTARY TABLE CN
N.2 pallet...
.JPG)
CMM COORD 3
COORD
10185
TRT/P 30.20.12
Transverse stroke 3000 mm
Longitudinal stroke 2,000 mm
Vertical stroke 1,200 mm
Table 3,000 x 1,500 mm
Vertical span 1,700 mm
USED...
10185
TRT/P 30.20.12
Transverse stroke 3000 mm
Longitudinal stroke 2,000 mm
Vertical stroke 1,200 mm
Table 3,000 x 1,500 mm
Vertical span 1,700 mm
USED...
LATHE PASQUINO PFN 400x7000
PASQUINO
07384
Center height mm 410
Turning diameter on the bed mm 825
Turning diameter on the gap mm 860
Turning diameter in the gap mm 1100
Turning diameter on...
07384
Center height mm 410
Turning diameter on the bed mm 825
Turning diameter on the gap mm 860
Turning diameter in the gap mm 1100
Turning diameter on...
LATHE TRAUB MOD. TND400
TRAUB
09836
LIVE TOOLS
CNC TRAUB SYSTEM TX 8F
Turning length 800 mm
Turning diameter over bed 480 mm
Turning diameter over cross slide 240 mm
Bar passaging 65...
09836
LIVE TOOLS
CNC TRAUB SYSTEM TX 8F
Turning length 800 mm
Turning diameter over bed 480 mm
Turning diameter over cross slide 240 mm
Bar passaging 65...
MEASURING MACHINE DISA COBRA
DISA
10177
DISA MODELLO COBRA TRB280
Strokes mm 1400x600x600
Head RENISHAW PH10M
EQUIPPED WITH:
Remote handwheel
Calibration sphere
USED MACHINE
10177
DISA MODELLO COBRA TRB280
Strokes mm 1400x600x600
Head RENISHAW PH10M
EQUIPPED WITH:
Remote handwheel
Calibration sphere
USED MACHINE
MILLING FIL MOD. FS130
FIL
10090
CNC SELCA S3045D
STROKES:
Longitudinal (X) mm 1300
Vertical (Z) mm 1000
Cross ram (Y) mm 1000
TABLE:
Length mm 1600
Width mm 570
Height mm...
10090
CNC SELCA S3045D
STROKES:
Longitudinal (X) mm 1300
Vertical (Z) mm 1000
Cross ram (Y) mm 1000
TABLE:
Length mm 1600
Width mm 570
Height mm...
MILLING KONDIA MOD. K-76
KONDIA
New02734
NUMERIC CONTROL HEIDENHAIN TNC 150
AXIS X MM.600
AXIS Y MM.350
QUILL VERTICAL AXIS Z MM.125
MAX WORKPIECE WEIGHT 225 KG.
TABLE SIZE MM....
New02734
NUMERIC CONTROL HEIDENHAIN TNC 150
AXIS X MM.600
AXIS Y MM.350
QUILL VERTICAL AXIS Z MM.125
MAX WORKPIECE WEIGHT 225 KG.
TABLE SIZE MM....
MILLING SECMU MOD. FBF 5PE / C-6M
SECMU
New04514
BED TYPE
CNC HEIDENHAIN 360C
TABLE SIZE MM.680X2000
NO. AND SIZE T-SLOT 5-18
AXIS X MM.2200
AXIS Y MM.1000
AXIS Z MM.1200
SPINDLE NOSE NO. 50
ENGINE...
New04514
BED TYPE
CNC HEIDENHAIN 360C
TABLE SIZE MM.680X2000
NO. AND SIZE T-SLOT 5-18
AXIS X MM.2200
AXIS Y MM.1000
AXIS Z MM.1200
SPINDLE NOSE NO. 50
ENGINE...
MOULDING TEST TCS 30 TON.
TCS
08734
Power 30 ton.
Removable lower plane mm 950x700
Tilting upper plane mm 1020x700
USED MACHINE
08734
Power 30 ton.
Removable lower plane mm 950x700
Tilting upper plane mm 1020x700
USED MACHINE
PRESS BRAKE WARCOM MOD. PI 25-40
WARCOM
07638
Force Ton 40
Bed lenght mm 2550
Distance between frames mm 2050
Throat depth mm 500
Ram stroke mm 95
Distance between table/piston mm 230
Motor...
07638
Force Ton 40
Bed lenght mm 2550
Distance between frames mm 2050
Throat depth mm 500
Ram stroke mm 95
Distance between table/piston mm 230
Motor...
PRESSA BRAKE BARIOLA TIPO 50-30
BARIOLA
10351
Force 50 tons
Max bending length 3050 mm
Stroke 100 mm
Length between uprights 2600 mm
Motor power 7.5 HP
USED MACHINE
10351
Force 50 tons
Max bending length 3050 mm
Stroke 100 mm
Length between uprights 2600 mm
Motor power 7.5 HP
USED MACHINE
RADIAL DRILLING ZJ 3063x20
RUBEN
09722
DRILLING DIAMETER 60 mm
ARM REACH 2000 mm
SPINDLE TRAVEL 400 mm
TAPER TYPE Morse 5
CENTRALIZED LOCKING SYSTEM
SPINDLE SPEEDS 16 - 1600 rpm
VERTICAL...
09722
DRILLING DIAMETER 60 mm
ARM REACH 2000 mm
SPINDLE TRAVEL 400 mm
TAPER TYPE Morse 5
CENTRALIZED LOCKING SYSTEM
SPINDLE SPEEDS 16 - 1600 rpm
VERTICAL...
.jpg)
ROLLER WELDING POSITIONER
ISAM
09713
ISAM PRF30
TOTAL LOAD CAPACITY: 30,000 KG
CONFIGURATION: MOTORIZED + IDLER
Maximum load capacity of motorized beam: 15,000 kg
Maximum load capacity...
09713
ISAM PRF30
TOTAL LOAD CAPACITY: 30,000 KG
CONFIGURATION: MOTORIZED + IDLER
Maximum load capacity of motorized beam: 15,000 kg
Maximum load capacity...
.jpeg)
SLOTTING MACHINE HOPFENGARTNER
HOPFENGARTNER
09715
Stroke: 500 mm
Rotary table diameter: 800 mm
Transversal stroke: approx. 600 mm
Longitudinal stroke: approx. 550 mm
Tool-to-column distance: 490...
09715
Stroke: 500 mm
Rotary table diameter: 800 mm
Transversal stroke: approx. 600 mm
Longitudinal stroke: approx. 550 mm
Tool-to-column distance: 490...
SPARK ERODER ONA PD 4.60 EO
ONA
10043
CNC ONA DATIC
TABLE:
Bathroom dimensions mm 1700x1000x650
Table size mm 1100x700
Load on the table Kg 4000
CROSS TABLE:
Longitudinal stroke X mm...
10043
CNC ONA DATIC
TABLE:
Bathroom dimensions mm 1700x1000x650
Table size mm 1100x700
Load on the table Kg 4000
CROSS TABLE:
Longitudinal stroke X mm...
LIFT DIESEL SIBICAR DS DA 30/40 Q-LI
MILLING MEXIM FU36PM
MEXIM
09946
Table dimensions mm 1600x360
Axis X mm 1100
Axis Y mm 300
Axis Z mm 420
Spindle speed n.12 / rpm 40-1800
Spindle motor power kW 7,5
Total installed...
09946
Table dimensions mm 1600x360
Axis X mm 1100
Axis Y mm 300
Axis Z mm 420
Spindle speed n.12 / rpm 40-1800
Spindle motor power kW 7,5
Total installed...
RADIAL DRILLING LTF 50x1600
LTF
10055
MOD. 416.03
Hydraulic clamps
Max drilling capacity on steel/cast iron mm 50/60
Max/min distance spindle axis/column mm 1600/350
Max/min distance...
10055
MOD. 416.03
Hydraulic clamps
Max drilling capacity on steel/cast iron mm 50/60
Max/min distance spindle axis/column mm 1600/350
Max/min distance...
.jpg)
SHEAR COLGAR MOD. C.405
COLGAR
09323
Cutting lenght mm 4050
Blade lenght mm 4150
Freedistance between columns mm 4150
Gap in columns mm 500
Cutting capacity with sheet metal R=42 Kp/mmq...
09323
Cutting lenght mm 4050
Blade lenght mm 4150
Freedistance between columns mm 4150
Gap in columns mm 500
Cutting capacity with sheet metal R=42 Kp/mmq...
.jpeg)
ANGULAR PLATE 1000X3000
10388
Width 1.000 mm
Depth 1.300 mm
Height 3.000 mm
USED EQUIPMENT
Width 1.000 mm
Depth 1.300 mm
Height 3.000 mm
USED EQUIPMENT
COMPRESSOR CECCATO CSM 15 AK
CECCATO
09264
FIXED SPEED
BELT DRIVE
Motor Power HP/KW 15/11
Pressure Bar 10
FAD:
-l/min 1416
-m3/h 85
Noise level db(A) 69
Gas 3/4''
Approx. compressor weight Kg...
09264
FIXED SPEED
BELT DRIVE
Motor Power HP/KW 15/11
Pressure Bar 10
FAD:
-l/min 1416
-m3/h 85
Noise level db(A) 69
Gas 3/4''
Approx. compressor weight Kg...
CHAMFERING MACHINE SERTOM MOD. C25
SERTOM
08896
Max sheet metal resistance Kg/mm2 40/60
Max chamfer length 25 mm
Max sheet metal thickness mm 65
Min. width piece mm 60
Min. length piece mm...
08896
Max sheet metal resistance Kg/mm2 40/60
Max chamfer length 25 mm
Max sheet metal thickness mm 65
Min. width piece mm 60
Min. length piece mm...
COMPRESSOR ATLAS COPCO GA45
ATLAS
08603
Pressure bar 7,4
Motor power kW 45
Motor speed rpm 2965
EQUIPPED WITH:
-Dryer and tank
USED MACHINE
08603
Pressure bar 7,4
Motor power kW 45
Motor speed rpm 2965
EQUIPPED WITH:
-Dryer and tank
USED MACHINE
DRILLING BERARDI VB 4 28
BERARDI
TRP.MTE.OO18
Hole capacity max mm 28
N.12 hole
Surface dimensions mm 1100x850
Spindle taper CM 3
Spindle speed n.12 Rpm 75-1060
Max interaxis mm 700
USED...
TRP.MTE.OO18
Hole capacity max mm 28
N.12 hole
Surface dimensions mm 1100x850
Spindle taper CM 3
Spindle speed n.12 Rpm 75-1060
Max interaxis mm 700
USED...
FACING HEAD TOS LD 650
TOS VANSDORF
08254
FOR BORING TOS VARNSDORF WH 10 / WH 105 / WHN 13 / WHN 110 WHN 130
USED EQUIPMENT
08254
FOR BORING TOS VARNSDORF WH 10 / WH 105 / WHN 13 / WHN 110 WHN 130
USED EQUIPMENT
GRINDING MORARA MM.400x1500
MORARA
RTF.EST.O228
MOD. REU 1500
-MAX SWING DIAMETER MM. 400
-MAX GRINDING LENGTH MM. 1500
-HEIGHT OF CENTRE MM.207
-DISTANCE BETWEEN CENTRE MM.1530
-MAX LONGITUDINAL...
RTF.EST.O228
MOD. REU 1500
-MAX SWING DIAMETER MM. 400
-MAX GRINDING LENGTH MM. 1500
-HEIGHT OF CENTRE MM.207
-DISTANCE BETWEEN CENTRE MM.1530
-MAX LONGITUDINAL...
.JPG)
GRINDING TACCHELLA 1015 UA
TACCHELLA
07445
Grinding lenght mm 750
Max grinding diameter mm 305
TABLE:
Max automatic stroke mm 750
Min. automatic stroke mm 3
Max inclination of the drill axis...
07445
Grinding lenght mm 750
Max grinding diameter mm 305
TABLE:
Max automatic stroke mm 750
Min. automatic stroke mm 3
Max inclination of the drill axis...
.jpeg)
LATHE GIANA GF 700 CNC x 1000
GIANA
09611
CNC Siemens SINUMERIK 810 T
CAPACITY:
Height of centers 350 mm
Max turning diameter on the bench 700 mm
Max turning diameter on the carriage 300 mm...
09611
CNC Siemens SINUMERIK 810 T
CAPACITY:
Height of centers 350 mm
Max turning diameter on the bench 700 mm
Max turning diameter on the carriage 300 mm...
LATHE MORANDO PA25 250x1500
MORANDO
07379
Height of center mm 255
Turning diameter on the bed mm 500
Turning diameter on the cross slide mm 310
Turning diameter on the gap mm 720
Distance...
07379
Height of center mm 255
Turning diameter on the bed mm 500
Turning diameter on the cross slide mm 310
Turning diameter on the gap mm 720
Distance...
LATHE OMG ZANOLETTI 250x1500
OMG ZANOLETTI
09327
Center height mm 250
Turning diameter on the bed mm 500
Rotary diameter on the gap mm 680
Turning diameter on the transversal carriage mm 300
Bed...
09327
Center height mm 250
Turning diameter on the bed mm 500
Rotary diameter on the gap mm 680
Turning diameter on the transversal carriage mm 300
Bed...
Length 5,000 mm
06222
Width 2,000 mm
Height 400 mm
10 T-slots mm 35
USED MATERIAL
4 PIECES AVAILABLE
Width 2,000 mm
Height 400 mm
10 T-slots mm 35
USED MATERIAL
4 PIECES AVAILABLE
MEASURING ARM FARO
FARO
09295
PLATINUM 2.4
6 AXIS
PERFORMANCE SPECIFICATIONS:
Measuring range m 2,4
Volumetric accuracy mm +/- 0,036
Single point repeatability mm 0,025
FaroArm...
09295
PLATINUM 2.4
6 AXIS
PERFORMANCE SPECIFICATIONS:
Measuring range m 2,4
Volumetric accuracy mm +/- 0,036
Single point repeatability mm 0,025
FaroArm...
MILLING ARNO NOMO MOD. F20
ARNO
08193
DRO 3 AXIS
Table dimensions mm 1300x270
Axs X stroke mm 900
Axis Y stroke mm 300
Axis Z stroke mm 400
Spindle speed n.12 / rpm 40-1725
Spindle taper...
08193
DRO 3 AXIS
Table dimensions mm 1300x270
Axs X stroke mm 900
Axis Y stroke mm 300
Axis Z stroke mm 400
Spindle speed n.12 / rpm 40-1725
Spindle taper...
MILLING CMB NR.2
CMB
08829
Table dimensions mm 1200x290
Axis X stroke mm 900
Axis Y stroke mm 300
Axis Z stroke mm 500
Spindle taper ISO 40
n.12 spindle speed rpm 30-1500
Ram...
08829
Table dimensions mm 1200x290
Axis X stroke mm 900
Axis Y stroke mm 300
Axis Z stroke mm 500
Spindle taper ISO 40
n.12 spindle speed rpm 30-1500
Ram...
MILLING MIKRON WF21C
MIKRON
New03198
CNC HEIDENHAIN 155
TABLE SIZE MM 800x450
AXIS X MM 600
AXIS Y MM 400
AXIS Z MM 400
SPINDLE TAPER ISO 40
USED MACHINE
New03198
CNC HEIDENHAIN 155
TABLE SIZE MM 800x450
AXIS X MM 600
AXIS Y MM 400
AXIS Z MM 400
SPINDLE TAPER ISO 40
USED MACHINE
MILLING NOVAR NR.2
NOVAR
09408
UNIVERSALE
Strokes mm 1000x300x400
Spindle speed rpm 54:1500
EQUIPPED WITH:
-Head ISO 40
-D.R.O. 3 axis
USED MACHINE
09408
UNIVERSALE
Strokes mm 1000x300x400
Spindle speed rpm 54:1500
EQUIPPED WITH:
-Head ISO 40
-D.R.O. 3 axis
USED MACHINE
PELLET BURNER GS 180
08585
Thermal power in the furnace kW 212
Nominal heat output kW 180
Generator air flow m3 / h 13500
Absorbed electrical power kW 4.04
Voltage V 400
Weight...
Thermal power in the furnace kW 212
Nominal heat output kW 180
Generator air flow m3 / h 13500
Absorbed electrical power kW 4.04
Voltage V 400
Weight...
PRESS SANDRETTO
SANDRETTO
07411
PISTON DIAMETER
TABLE MM 2950 x 400 ( 500 AL CENTRO)
TRAVEL MM 450
MAX DISTANCE BETWEEN COLUMNS MM 600
MIN. MOULD THICKNESS MM 150
USED MACHINE
07411
PISTON DIAMETER
TABLE MM 2950 x 400 ( 500 AL CENTRO)
TRAVEL MM 450
MAX DISTANCE BETWEEN COLUMNS MM 600
MIN. MOULD THICKNESS MM 150
USED MACHINE
ROTARY TABLE TMB-EUROMA 250
.jpg)
SURFACE GRINDING ABA
ABA
10329
CN
Table size 350 mm
Magnetic chuck 700 x 310 mm
Grinding wheel size 350 mm
COMPLETE WITH:
- Paper filter
USED MACHINE
10329
CN
Table size 350 mm
Magnetic chuck 700 x 310 mm
Grinding wheel size 350 mm
COMPLETE WITH:
- Paper filter
USED MACHINE
VERTICAL CENTER VICTOR VC-80
VICTOR
10375
CNC FANUC O-MC
Axis X stroke mm 800
Axis Y stroke mm 400
Axis Z stroke mm 600
Spindle speed rpm 6000
Tool magazine 24 positions
EQUIPPED WITH:
-Chip...
10375
CNC FANUC O-MC
Axis X stroke mm 800
Axis Y stroke mm 400
Axis Z stroke mm 600
Spindle speed rpm 6000
Tool magazine 24 positions
EQUIPPED WITH:
-Chip...
PRESS GMR ART.325
GMR
09891
Force Ton 100 Ton
Distance between frames mm 1000
Max pressure 400 bar
Stroke mm 300
Weight Kg 1000
Overall dimensions mm 1900x900x2230h
NEW MACHINE...
09891
Force Ton 100 Ton
Distance between frames mm 1000
Max pressure 400 bar
Stroke mm 300
Weight Kg 1000
Overall dimensions mm 1900x900x2230h
NEW MACHINE...
COMPRESSOR CECCATO CSM10 AK
CECCATO
08831
FIXED SPEED
BELT DRIVE
Motor power HP/kW 10/7,5
Pressure Bar 10
FAD:
-l/min 996
-m3/h 60
Noise level db(A) 65
Gas 3/4''
Approx. weight Kg 305
Approx....
08831
FIXED SPEED
BELT DRIVE
Motor power HP/kW 10/7,5
Pressure Bar 10
FAD:
-l/min 996
-m3/h 60
Noise level db(A) 65
Gas 3/4''
Approx. weight Kg 305
Approx....
BENDING ROLLS SERGI EXPORT 2000x4
SERGI
10113
Max length mm 2000
Max thickness mm 4
Upper roller diameter mm 125
Lower/side roller diameter mm 125
Motor power HP 4+2
Machine weight Kg 1250
USED...
10113
Max length mm 2000
Max thickness mm 4
Upper roller diameter mm 125
Lower/side roller diameter mm 125
Motor power HP 4+2
Machine weight Kg 1250
USED...
COMPRESSOR CECCATO CSM 7,5 AK
CECCATO
09261
FIXED SPEED
BELT DRIVE
Motor Power HP/KW 7,5/5,5
Pressure Bar 10
FAD:
-l/min 696
-m3/h 42
Noise level db(A) 64
Gas 3/4''
Approx. weight weight Kg...
09261
FIXED SPEED
BELT DRIVE
Motor Power HP/KW 7,5/5,5
Pressure Bar 10
FAD:
-l/min 696
-m3/h 42
Noise level db(A) 64
Gas 3/4''
Approx. weight weight Kg...
.JPG)
DRILL SASS TRL 1600
SASS
10142
RADIAL DRILL SASS mod. TRL 1600
Drilling/tapping in steel diameter mm 50
Quill taper CM 5
Vertical quill travel mm 400
Sliding quill travel mm 85
16...
10142
RADIAL DRILL SASS mod. TRL 1600
Drilling/tapping in steel diameter mm 50
Quill taper CM 5
Vertical quill travel mm 400
Sliding quill travel mm 85
16...
DRILLING SASS 1600x50
ECCENTRIC PRESS STANKO
STANKO IMPORT
07574
C TYPE
Power Ton
Bed size mm
Ram size mm
Distance surface table / ram mm
Adjustable stroke da mm. 0 a 320
Stroke per minute 46
USED MACHINE
07574
C TYPE
Power Ton
Bed size mm
Ram size mm
Distance surface table / ram mm
Adjustable stroke da mm. 0 a 320
Stroke per minute 46
USED MACHINE
ERODER WIRE MITSUBISHI MOD.CX20
MITSUBISHI
New04238
- Max piece size (LxPxH) mm.850x650x295
- Max piece weight Kg.800
- Table size mm.740x590
- Axis stroke (XYZ) mm.500x350x300
- Table rapids mm/min...
New04238
- Max piece size (LxPxH) mm.850x650x295
- Max piece weight Kg.800
- Table size mm.740x590
- Axis stroke (XYZ) mm.500x350x300
- Table rapids mm/min...
GUILLOTINE SHEAR MOD. CPM 20/4
IMAL
08273
Cutting lenght mm 2050
Max thickness mm 4
EQUIPPED WITH:
-Motorized rear register mm 1000
-Front and rear guards
USED MACHINE
08273
Cutting lenght mm 2050
Max thickness mm 4
EQUIPPED WITH:
-Motorized rear register mm 1000
-Front and rear guards
USED MACHINE
.jpeg)
LATHE HITACHI SEIKI HT20SII
HITACHI SEIKI
09353
CNC YASNAC LX3
CAPACITY':
Swing diameter mm 380
Max turning diameter mm 210
Bar passage mm 51
STROKES:
X-axis stroke mm 200
Z axis stroke mm...
09353
CNC YASNAC LX3
CAPACITY':
Swing diameter mm 380
Max turning diameter mm 210
Bar passage mm 51
STROKES:
X-axis stroke mm 200
Z axis stroke mm...
MILLING ITAMA FV20S
ITAMA
09442
TABLE:
Dimensions 1270x254 mm
T-slots n.03 - 16x63 mm
Max table load 150 kg
AXES:
X axis longitudinal strokel 780 mm
Y axis transversal stroke 400...
09442
TABLE:
Dimensions 1270x254 mm
T-slots n.03 - 16x63 mm
Max table load 150 kg
AXES:
X axis longitudinal strokel 780 mm
Y axis transversal stroke 400...
MILLING TOS KURIM FNK25A
TOS
07344
Table surface mm 290x1250
T-slots a T n.3 / mm 14x80
Longitudinal table stroke mm 800
Cross table stroke mm 360
Vertical table stroke mm...
07344
Table surface mm 290x1250
T-slots a T n.3 / mm 14x80
Longitudinal table stroke mm 800
Cross table stroke mm 360
Vertical table stroke mm...
RADIAL DRILLING LTF 50x1600
LTF
10447
MOD. 416.03
HYDRAULIC CLAMPS
Max drilling capacity on steel/cast iron mm 50/60
Max/min distance spindle axis/column mm 1600/350
Max/min distance...
10447
MOD. 416.03
HYDRAULIC CLAMPS
Max drilling capacity on steel/cast iron mm 50/60
Max/min distance spindle axis/column mm 1600/350
Max/min distance...
CNC ROTARY TABLE DIAM 200
GOLDEN SUN
10203
GOLDEN SUN CNC 201R
Table diameter mm 200
Height of center mm 160
MAx load in vertical kg 125
Mx load in horizontal kg 250
EQUIPPED WITH:
Fanuc...
10203
GOLDEN SUN CNC 201R
Table diameter mm 200
Height of center mm 160
MAx load in vertical kg 125
Mx load in horizontal kg 250
EQUIPPED WITH:
Fanuc...
GRINDING SURFACE DELTA MOD. LF 350
DELTA
10430
-Distance between column axis and wheel axis mm 315
-Max distance between table-level and wheel mm 280
-Max grinding surface mm 155x360
-Rapid feed...
10430
-Distance between column axis and wheel axis mm 315
-Max distance between table-level and wheel mm 280
-Max grinding surface mm 155x360
-Rapid feed...
ROTARY TABLE 450x800
10421
Slots No. 5/14x63
Dimensions 895x450xh350 mm Rotation 360°
Tilt forward/backward ±45°/right-left ±30°
NEW MATERIAL
Slots No. 5/14x63
Dimensions 895x450xh350 mm Rotation 360°
Tilt forward/backward ±45°/right-left ±30°
NEW MATERIAL
DRILLING ADRIA MACHINE
ADRIA MACHINE
09795
MOD. EXPO 40 PGM DA
TILTING TABLE WITH VICE
AUTOMATIC QUILL DOWNLOAD
CONE C.M. 4
TWO POLARITY MOTOR
THREADING BY TELEINVERTER 24V
LUBRICATION WITH...
09795
MOD. EXPO 40 PGM DA
TILTING TABLE WITH VICE
AUTOMATIC QUILL DOWNLOAD
CONE C.M. 4
TWO POLARITY MOTOR
THREADING BY TELEINVERTER 24V
LUBRICATION WITH...
ANGULAR PLATE 1800x800
09516
Dimension 1.800x800 mm
Base 800x650 mm
USED EQUIPMENT
(AVAILABLE N.2 PIECES)
Dimension 1.800x800 mm
Base 800x650 mm
USED EQUIPMENT
(AVAILABLE N.2 PIECES)
CAR ELEVATOR STILL
CLAMPING PLATE 3500x2000
09829
Dimensions 3500x2000x360
With T-slots
USED MACHINE
Dimensions 3500x2000x360
With T-slots
USED MACHINE
DRILLING MOD. Z03080
05936
Drilling capacity max mm 80
Straddle mm 2000
Distance between spindle center and column min/max mm 450/2050
Distance between spindle nose and working...
Drilling capacity max mm 80
Straddle mm 2000
Distance between spindle center and column min/max mm 450/2050
Distance between spindle nose and working...
EXTERNAL GRINDING MACHINE ZOCCA RU 600
ZOCCA
07405
Height of center mm 180
Grinding diameter mm 360
Grinding lenght mm 600
Wheel dimensions mm 400x40
Table rotation -10/2 degrees
head rotation +/-45...
07405
Height of center mm 180
Grinding diameter mm 360
Grinding lenght mm 600
Wheel dimensions mm 400x40
Table rotation -10/2 degrees
head rotation +/-45...
GUILLOTINE SHEAR BARIOLA CBN 10
BARIOLA
10352
Cutting length 2550 mm
Cutting thickness (R40) 3 mm
Gap 200 mm
Cuts per minute 50
Motor power 5.5 HP
EQUIPPED WITH:
-Motorized rear register
USED...
10352
Cutting length 2550 mm
Cutting thickness (R40) 3 mm
Gap 200 mm
Cuts per minute 50
Motor power 5.5 HP
EQUIPPED WITH:
-Motorized rear register
USED...
GUILLOTINES SHEAR COMAL
.jpeg)
LATHE COMEC TGA 210Nx1000
COMEC
08899
Height of center mm 210
Distance between center mm 1000
Spindle nose CAM-LOCK 5''
Spindle bore mm 77
EQUIPPED WITH:
-Chuck mm 210
-Turret
USED...
08899
Height of center mm 210
Distance between center mm 1000
Spindle nose CAM-LOCK 5''
Spindle bore mm 77
EQUIPPED WITH:
-Chuck mm 210
-Turret
USED...
LATHE GIOVANNI BREDA 305x3000
BREDA
08075
MOD. BRP 300
TECHNICAL DETAILS:
Height centre mm 305
Turning diameter over bed mm 610
Turning diameter over carriage mm 410
Turning diameter in gap...
08075
MOD. BRP 300
TECHNICAL DETAILS:
Height centre mm 305
Turning diameter over bed mm 610
Turning diameter over carriage mm 410
Turning diameter in gap...
.jpeg)
LATHE GORNATI 200X1000
GORNATI
10301
Center height 200 mm
Center distance 1000 mm
Bar passage 70 mm
COMPLETE WITH:
-Self-centering chuck diam. 220 mm
-Heidenhain dimension display
USED...
10301
Center height 200 mm
Center distance 1000 mm
Bar passage 70 mm
COMPLETE WITH:
-Self-centering chuck diam. 220 mm
-Heidenhain dimension display
USED...
MILLING DEBER MOD. FU 180-M
DEBER
09374
Working plane mm 1570x380
Axis X stroke mm 1400
Axis Y stroke mm 350
Axis Z stroke mm 620
Bi-rotary head ISO 50
USED MACHINE
09374
Working plane mm 1570x380
Axis X stroke mm 1400
Axis Y stroke mm 350
Axis Z stroke mm 620
Bi-rotary head ISO 50
USED MACHINE
MOTOCOMPRESSOR ATLAS COPCO
ATLAS COPCO
09752
MOD. XAS 125
Flow rate 7.5 m3/min.
Engine power 55.5 KW
Max pressure 8.5 bar
Weight 1530 kg
USED MATERIAL
09752
MOD. XAS 125
Flow rate 7.5 m3/min.
Engine power 55.5 KW
Max pressure 8.5 bar
Weight 1530 kg
USED MATERIAL
TRUCK LIFT LUGLI ELX30
LUGLI
06671
BATTERY
Load capacity Kg 3000
Max forks height mm 4000
Forks mm 1200x130x45
USED MACHINE
06671
BATTERY
Load capacity Kg 3000
Max forks height mm 4000
Forks mm 1200x130x45
USED MACHINE
TUBE-BENDING PEDRAZZOLI MOD. UNI 8O
PEDRAZZOLI
PGT.OLE.OOO4
TECHNICAL CHARACTERISTICS
* Max sweep capacity with material resilience R=40 Kg/mm2 mm.80x5
* min. sweep radius internal mm.45
* max. sweep radius...
PGT.OLE.OOO4
TECHNICAL CHARACTERISTICS
* Max sweep capacity with material resilience R=40 Kg/mm2 mm.80x5
* min. sweep radius internal mm.45
* max. sweep radius...
UNIVERSAL MILLING MACHINE INDUMA
INDUMA
08352
WORKTABLE 1500x300 mm
T-SLOT NUMBER 3
T-SLOT WIDTH 16 mm
T-SLOT DISTANCE 55 mm
LONGITUDINAL TRAVEL 1050 mm
TRANSVERSAL TRAVEL 315 mm
VERTICAL TRAVEL...
08352
WORKTABLE 1500x300 mm
T-SLOT NUMBER 3
T-SLOT WIDTH 16 mm
T-SLOT DISTANCE 55 mm
LONGITUDINAL TRAVEL 1050 mm
TRANSVERSAL TRAVEL 315 mm
VERTICAL TRAVEL...
LEVELING MCHINE ELMEA MR79
08835
9 rolls
bend width mm 1000
bend thickness mm 2
USED MACHINE
9 rolls
bend width mm 1000
bend thickness mm 2
USED MACHINE
ROUNDNESS TESTING FAG MOD. FMS 4210
FAG
New05644
ROTATION AXIS "C AXIS":
-Diameter of rotary table 200 mm
-Max load capacity 500 N
-Max control diameter 300 mm, se il tastatore è posizionato al di...
New05644
ROTATION AXIS "C AXIS":
-Diameter of rotary table 200 mm
-Max load capacity 500 N
-Max control diameter 300 mm, se il tastatore è posizionato al di...
.jpg)
SURFACE GRINDING FAVRETTO TA 60
FAVRETTO
10327
Table dimensions: 1000 x 300 mm
Grinding wheel dimensions: 300 mm
Complete with:
- Magnetic plate: 50 x 250 mm
USED MACHINE
10327
Table dimensions: 1000 x 300 mm
Grinding wheel dimensions: 300 mm
Complete with:
- Magnetic plate: 50 x 250 mm
USED MACHINE
ANGULAR PLATE 1000x2500
08730
Dimension 1.000x2.500 mm
Base 1.000x1.000 mm
USED EQUIPMENT
Dimension 1.000x2.500 mm
Base 1.000x1.000 mm
USED EQUIPMENT
LATHE GRAZIANO SAG 14
GRAZIANO
09368
Height of center on the bed mm 190
Height of center on the gap mm 250
Height of center on the carriage mm 120
Distance between centers mm 900
Bar...
09368
Height of center on the bed mm 190
Height of center on the gap mm 250
Height of center on the carriage mm 120
Distance between centers mm 900
Bar...
LATHE LABOR MOD. 255x2000
PADOVANI
09018
Height of center mm 255
Distance between centers mm 2000
Spindle bore mm 105
Turning diameter on the carriage mm 330
EQUIPPED WITH:
-Chuck D.G. Pinto...
09018
Height of center mm 255
Distance between centers mm 2000
Spindle bore mm 105
Turning diameter on the carriage mm 330
EQUIPPED WITH:
-Chuck D.G. Pinto...
PRESS HYDRAULIC DM
.jpg)
SURFACE GRINDING FAVRETTO RTF 75 L
FAVRETTO
10328
Table size 1.000 x 350 mm
Grinding wheel size 280 mm
COMPLETE WITH:
Magnetic table 760 x 350 mm
USED MACHINE
10328
Table size 1.000 x 350 mm
Grinding wheel size 280 mm
COMPLETE WITH:
Magnetic table 760 x 350 mm
USED MACHINE
HEAD FOR MILLING RAMBAUDI RAM-MILL
N.2 MAGNETIC CHUCK 770x360
09675
TECNOMAGNETE
square 50 mm
EQUIPPED WITH:
-N.1 electrical unit
USED MATERIAL
TECNOMAGNETE
square 50 mm
EQUIPPED WITH:
-N.1 electrical unit
USED MATERIAL
N.2 MAGNETIC CHUCK 770x410
N.2 MAGNETIC CHUCK 760x360
BAND SAW IMET VTF500 SHI-E/ESC
IMET
09395
SEMIAUTOMATIC VERTICAL BAND SAW
Hydraulically driven,
Mitre cutting from 0° to 45° left and right.
Cutting capacity at 0°:
-Round 330 mm
-Square...
09395
SEMIAUTOMATIC VERTICAL BAND SAW
Hydraulically driven,
Mitre cutting from 0° to 45° left and right.
Cutting capacity at 0°:
-Round 330 mm
-Square...
COMPRESSOR KAESER MOD. AS 36
KAESER
09565
Load l/min 2600
Pressure bar 10
Power kw 22
Revolution rpm 1500
EQUIPED WITH:
-Dryer ED 480 DMI
-Tank IBC 1000 L
USED MACHINE
09565
Load l/min 2600
Pressure bar 10
Power kw 22
Revolution rpm 1500
EQUIPED WITH:
-Dryer ED 480 DMI
-Tank IBC 1000 L
USED MACHINE
EFFORT TESTING MACHINE HECKERT TON.40
.jpeg)
LATHE FIMAP MOD. TP 26
FIMAP
09354
Height of center on the bed mm 260
Height of center on the carriage mm 175
Height of center on the gap mm 300
Distance between centers mm...
09354
Height of center on the bed mm 260
Height of center on the carriage mm 175
Height of center on the gap mm 300
Distance between centers mm...
LATHE GAZIOLI DANIA 210x1000
GRAZIOLI
08900
WITH D.R.O.
Height of center mm 210
Distance between center mm 1000
Spindle taper CAM-LOCk 6''
Spindle Bore mm 77
EQUIPPED WITH:
-Chuck mm...
08900
WITH D.R.O.
Height of center mm 210
Distance between center mm 1000
Spindle taper CAM-LOCk 6''
Spindle Bore mm 77
EQUIPPED WITH:
-Chuck mm...
LATHE SCHAERER
SCHAERER
TRN.CNC.O556
MOD. UDA 560X1500
Height of center mm.280
Max diameter swing over bed mm.540
Max diameter swing over cross carriage mm.375
Max diameter swing over...
TRN.CNC.O556
MOD. UDA 560X1500
Height of center mm.280
Max diameter swing over bed mm.540
Max diameter swing over cross carriage mm.375
Max diameter swing over...
MEASURING TRIDIMENSIONAL MACHINE M.D.M.
MDM
NEW00913
MOD. CATRIM
TRAVELS:
-AXIS X MM.1500
-AXIS Y MM.800
-AXIS Z MM.500
DIABASE MEASURING TABLE:
-THICKNESS MM.350
-WIDHT MM.1150
-LENGHT MM.2500
-MAX...
NEW00913
MOD. CATRIM
TRAVELS:
-AXIS X MM.1500
-AXIS Y MM.800
-AXIS Z MM.500
DIABASE MEASURING TABLE:
-THICKNESS MM.350
-WIDHT MM.1150
-LENGHT MM.2500
-MAX...
.jpg)
MILLING DECKEL FP2
DECKEL
10290
X axis 400 mm
Y axis 200 mm
Z axis 400 mm
Spindle speed 2.000 rpm
Complete with:
- D.R.O. Heidenhain
USED MACHINE
10290
X axis 400 mm
Y axis 200 mm
Z axis 400 mm
Spindle speed 2.000 rpm
Complete with:
- D.R.O. Heidenhain
USED MACHINE
MILLING SIMPLON N.2
SIMPLON
09625
Table dimensions mm 1300x300
Axis X stroke mm 850
Axis Y stroke mm 250
Axis Z stroke mm 400
SPINDLE
manual milling head
spindle nose ISO 40
n.12...
09625
Table dimensions mm 1300x300
Axis X stroke mm 850
Axis Y stroke mm 250
Axis Z stroke mm 400
SPINDLE
manual milling head
spindle nose ISO 40
n.12...
N.2 MAGNETIC CHUCK 630x490
PAD-PRINTING COMEC XP 08
COMEC
07591
SLIDE INKPRINT
4 COLORS
CONTROL ELECTROPNEUMATIC
Clichè dimension mm 100x200
Ink-tray dimension mm 90
Max printing diam. mm 75
Pad horizontal stroke...
07591
SLIDE INKPRINT
4 COLORS
CONTROL ELECTROPNEUMATIC
Clichè dimension mm 100x200
Ink-tray dimension mm 90
Max printing diam. mm 75
Pad horizontal stroke...
.jpeg)
RADIAL DRILING KOVOSVIT MOD. VO 50
MAS
09284
PRISMATIC GUIDEWAYS
Drilling capacity in steel mm 50
Drilling capacity on cast iron mm 60
Lenght mm 1600
Spindle taper MK5
Spindle diameter mm...
09284
PRISMATIC GUIDEWAYS
Drilling capacity in steel mm 50
Drilling capacity on cast iron mm 60
Lenght mm 1600
Spindle taper MK5
Spindle diameter mm...
RADIAL DRILL BERGONZI MOD. FS 1000
BERGONZI
08218
Max drilling capacity mm 45
Lenght mm 1000
Spindle speed Rpm 1350
EQUIPPED WITH:
Cube mm 400x500x H430
USED MACHINE
08218
Max drilling capacity mm 45
Lenght mm 1000
Spindle speed Rpm 1350
EQUIPPED WITH:
Cube mm 400x500x H430
USED MACHINE
RADIAL DRILLING STANKOIMPORT MOD. 2K52-1
EMA
08754
Drilling capacity on steel with R = 45/50 mm 25
Threading capacity on steel M16x2
Distance between spindle axis and column max/min mm...
08754
Drilling capacity on steel with R = 45/50 mm 25
Threading capacity on steel M16x2
Distance between spindle axis and column max/min mm...
RADIAL DRILLING Z3032x10/1
10115
Max drilling diameter mm 32
Max reach mm 1000
Spindle speed rpm 32-2500
Motor power kW 2.2
Approx. machine weight Kg 1600
EQUIPPED WITH:
-Cube and...
Max drilling diameter mm 32
Max reach mm 1000
Spindle speed rpm 32-2500
Motor power kW 2.2
Approx. machine weight Kg 1600
EQUIPPED WITH:
-Cube and...
RAM FOR VERTICAL LATHE TITAN
SHEAR DAVI MM.2000x6
DAVI
New04495
Mechanical
Max cutting lenght mm 2000
Thickness mm 8
Gap mm 500
Without backgauge
USED MACHINE
New04495
Mechanical
Max cutting lenght mm 2000
Thickness mm 8
Gap mm 500
Without backgauge
USED MACHINE
TRUCK LIFT NICHIYU MOD. FB 30 PN 65 450
NICHIYU
06672
Battery
Load capacity Kg 3000
Max forks height mm 4500
Forks mm 1200x120x40
USED MACHINE
06672
Battery
Load capacity Kg 3000
Max forks height mm 4500
Forks mm 1200x120x40
USED MACHINE
SAW MEP MOD. SHARK 281
MEP
10236
MANUAL BAND BLADE
FOR +60 DEGREES CUTTING
CUTTING CAPACITY:
0 degrees, round 250 mm, rectangle 230 mm, square 280x200 mm
+45 degrees, round 190 mm,...
10236
MANUAL BAND BLADE
FOR +60 DEGREES CUTTING
CUTTING CAPACITY:
0 degrees, round 250 mm, rectangle 230 mm, square 280x200 mm
+45 degrees, round 190 mm,...
SAW MEP MOD. PH 262 HB
MEP
10235
BAND BLADE MANUAL
CUTTING FROM -45 degrees TO +60 degrees
The HB device allows to perform single cuts without operator intervention by using...
10235
BAND BLADE MANUAL
CUTTING FROM -45 degrees TO +60 degrees
The HB device allows to perform single cuts without operator intervention by using...
SHARPENING 3M MOD. 5/55
3M
08626
Sharpening capacity 5/55 mm
Fixed partitions n.12
Conduction ratio 1.1 -1.2
Minimum tip angle 90 degrees
Maximum tip angle180 degrees
Motor power HP...
08626
Sharpening capacity 5/55 mm
Fixed partitions n.12
Conduction ratio 1.1 -1.2
Minimum tip angle 90 degrees
Maximum tip angle180 degrees
Motor power HP...
INDUSTRIAL REFIRGERATION FRIGOBOX
LATHE GRAZIANO SAG 202
GRAZIANO
08079
CNC ECS 2302
Max swing diameter mm 540
Max turning diameter mm 310
Max turning lenght mm 600
Bar passaging mm 65
Spindle mm 250
Turret 12 positions...
08079
CNC ECS 2302
Max swing diameter mm 540
Max turning diameter mm 310
Max turning lenght mm 600
Bar passaging mm 65
Spindle mm 250
Turret 12 positions...
.jpeg)
SPARK ERODER ONA C300
ONA
10169
X-axis travel mm 400
Y-axis travel mm 300
Tank dimensions mm 900 x 500 x 300
Table dimensions mm 550 x 400
Load capacity kg 800
Max. workpiece height...
10169
X-axis travel mm 400
Y-axis travel mm 300
Tank dimensions mm 900 x 500 x 300
Table dimensions mm 550 x 400
Load capacity kg 800
Max. workpiece height...
CHUCK ROHM ZG 500/4
08455
4 JAWS 4+4
Diameter mm 500
Spindle bore mm 190
NEW EQUIPMENT READY DELIVERY
4 JAWS 4+4
Diameter mm 500
Spindle bore mm 190
NEW EQUIPMENT READY DELIVERY
MAGNETIC CHUCK PM71.50120
09739
ELECTROPERMANENT
MILLING SERIES
Dimensions mm 1200x470
USED MATERIAL
N.2 pieces available
YOM 2011
ELECTROPERMANENT
MILLING SERIES
Dimensions mm 1200x470
USED MATERIAL
N.2 pieces available
YOM 2011
N.1 MAGNETIC CHUCK 1000x500
09630
square 70
EQUIPPED WITH:
-N.1 electric unit
USED MATERIAL
square 70
EQUIPPED WITH:
-N.1 electric unit
USED MATERIAL
N.2 MAGNETIC CHUCK 400x400
PLATEAU 1000
09835
Diameter mm 1.000
Platform thickness mm
Base jaws + clamp
WidthxJaw length mm
EQUIPMENT USED
Diameter mm 1.000
Platform thickness mm
Base jaws + clamp
WidthxJaw length mm
EQUIPMENT USED
BAND SAW IMET MOD. GBS 218
IMET
08022
MANUAL
Area angular cut degrees 90 +30
Cutting capacity:
- 90 degrees round mm 220
- 90 degrees square mm 210
- 90 degrees rectangular mm...
08022
MANUAL
Area angular cut degrees 90 +30
Cutting capacity:
- 90 degrees round mm 220
- 90 degrees square mm 210
- 90 degrees rectangular mm...
ANGULAR PLATE 1200x700
10085
Dimension 1.200x700 mm
Base 1.000x600 mm
USED EQUIPMENT
Dimension 1.200x700 mm
Base 1.000x600 mm
USED EQUIPMENT
.jpg)
BAR LOADER IEMCA TS 560/33/P
IEMCA
09403
Bar diameter 5:65 mm
Max warehouse capacity 3/4 superimposed planes mm 1800
Power supply voltage Volt 380 three-phase / Hz 50
Installed power kW...
09403
Bar diameter 5:65 mm
Max warehouse capacity 3/4 superimposed planes mm 1800
Power supply voltage Volt 380 three-phase / Hz 50
Installed power kW...
LATHE DIMAC MOD. IPO 30 CNC
DIMAC
09984
CNC VIDUE ELCON 6
WORKING RANGE:
X-axis stroke mm 75
Z-axis stroke mm 450
Max diameter on the carriage mm 130
Max diameter on the bend mm...
09984
CNC VIDUE ELCON 6
WORKING RANGE:
X-axis stroke mm 75
Z-axis stroke mm 450
Max diameter on the carriage mm 130
Max diameter on the bend mm...
LATHE TOVAGLIERI 250x2000
TOVAGLIERI
07417
DISTANCE BETWEEN CENTER MM 2000
HEGHT OF CENTER ON BAD MM 250
HEIGHT OF CENTER ON CARRIAGE MM 150
CAMLOOK
BARR CAPACITY MM 80
QUILL TAILSTOCK MM...
07417
DISTANCE BETWEEN CENTER MM 2000
HEGHT OF CENTER ON BAD MM 250
HEIGHT OF CENTER ON CARRIAGE MM 150
CAMLOOK
BARR CAPACITY MM 80
QUILL TAILSTOCK MM...
MILLING ARNO MOD. F30
ARNO
08854
TABLE:
Table dimensions mm 1550x350
STROKES:
Longitudinal mm 1150
Cross mm 330
Vertical mm 440
SPINDLE:
Spindle taper ISO 50
Spindle speed n.12 - rpm...
08854
TABLE:
Table dimensions mm 1550x350
STROKES:
Longitudinal mm 1150
Cross mm 330
Vertical mm 440
SPINDLE:
Spindle taper ISO 50
Spindle speed n.12 - rpm...
ORTHOGONAL MILLING HEAD ISO 50
08825
Orthogonal type
manual positioning
USED EQUIPMENT
Orthogonal type
manual positioning
USED EQUIPMENT
PRESETTING SPERONI STP 56 MM2
SPERONI
09562
Longitudinal stroke (x axis) 250 mm
Vertical stroke 800 mm
Movement speed 850 mm/min.
USED MACHINE
09562
Longitudinal stroke (x axis) 250 mm
Vertical stroke 800 mm
Movement speed 850 mm/min.
USED MACHINE
DRILLING ADRIA MACHINE
ADRIA
07313
MOD. 28 EXPORT PGM
TILTING TABLE WITH VICE
C.M. 3
TWO POLE MOTOR
TELEINVERTER 24V
Technical specifications:
Drilling capacity with previous hole...
07313
MOD. 28 EXPORT PGM
TILTING TABLE WITH VICE
C.M. 3
TWO POLE MOTOR
TELEINVERTER 24V
Technical specifications:
Drilling capacity with previous hole...
MILLING SIMPLON
SIMPLON
07654
Table dimensions mm 1200x260
Axis X stroke mm 650
Axis Y stroke mm 300
Axis Z stroke mm 400
Spindle speed n.12 - rpm 25:1500
Rotary head ISO 40
USED...
07654
Table dimensions mm 1200x260
Axis X stroke mm 650
Axis Y stroke mm 300
Axis Z stroke mm 400
Spindle speed n.12 - rpm 25:1500
Rotary head ISO 40
USED...
SAW BAND EMAPP MOD.260 SA
EMAPP
10372
SEMI-AUTOMATIC
Cutting capacity:
-0 degrees round 260 mm, square 260x260 mm, rectangle 260x365 mm
-45 degrees round 250 mm, square 170x170 mm,...
10372
SEMI-AUTOMATIC
Cutting capacity:
-0 degrees round 260 mm, square 260x260 mm, rectangle 260x365 mm
-45 degrees round 250 mm, square 170x170 mm,...
SHARPENING CUOGHI APE 40
CUOGHI
10434
Min. sharpening diameter 2 mm
Max sharpening diameter 40 mm
Min. and max. tip angle 40:180 degrees
Tool cutting edges (R and S) 2-3-4-6
Motor power 1...
10434
Min. sharpening diameter 2 mm
Max sharpening diameter 40 mm
Min. and max. tip angle 40:180 degrees
Tool cutting edges (R and S) 2-3-4-6
Motor power 1...
ALTERNATIVE SAW RAIM
ANGULAR PLATE 1100x1120
09440
Dimension 1.100x1.120 mm
Base 1.100x700
Perforated
USED EQUIPMENT
Dimension 1.100x1.120 mm
Base 1.100x700
Perforated
USED EQUIPMENT
JIB CRANE KG 2.000
JIB CRANE KG 2.000
JIB CRANE KG 2.000
LATHE ANSELMI MONOFAP 180E
ANSELMI
10098
Height of centers mm 180
Distance between centers mm 1500
Max turning diameter mm 390
Gap width mm 200
Bed width mm 320
Spindle bore mm 50
Spindle...
10098
Height of centers mm 180
Distance between centers mm 1500
Max turning diameter mm 390
Gap width mm 200
Bed width mm 320
Spindle bore mm 50
Spindle...
THREE-DIMENSIONAL MEASURING
MDM
08369
MDM CATRIM GR2
X-AXIS TRAVEL 720 mm
Y-AXIS TRAVEL 520 mm
TABLE SIZE 850x1500x300 mm
EQUIPPED WITH:
-GRANITE PLAN
USED MACHINE
08369
MDM CATRIM GR2
X-AXIS TRAVEL 720 mm
Y-AXIS TRAVEL 520 mm
TABLE SIZE 850x1500x300 mm
EQUIPPED WITH:
-GRANITE PLAN
USED MACHINE
N.1 MAGNETIC CHUCK 610x410
SHARPENING CUOGHI APE 35
CUOGHI
08110
Min. sharpening diameter 2 mm
Max sharpening diameter 35 mm
Min. and max. tip angle 40:180 degrees
Tool cutting edges (R and S) 2-3-4-6
Motor power 1...
08110
Min. sharpening diameter 2 mm
Max sharpening diameter 35 mm
Min. and max. tip angle 40:180 degrees
Tool cutting edges (R and S) 2-3-4-6
Motor power 1...
.jpg)
COLUMN DRILLING POLI E MIGLIORINI
DRILL
08390
DRILL 30
MAX DRILLING DIAMETER 30 mm
SPINDLE SPEED 100-2400 rpm
TABLE SIZE 330x340 mm
OVERALL DIMENSIONS 500x900x1800 mm
USED MACHINE
08390
DRILL 30
MAX DRILLING DIAMETER 30 mm
SPINDLE SPEED 100-2400 rpm
TABLE SIZE 330x340 mm
OVERALL DIMENSIONS 500x900x1800 mm
USED MACHINE
.jpeg)
COMPRESSOR ALUP
ALUP
07140
MOD. VARIO 7,5
Pressure max 10 Bar
Flow rate 1040 l/min
Power 7,5 Kw/10 Hp
EQUIPPED WITH:
-Tank
-Dryer
USED MACHINE
07140
MOD. VARIO 7,5
Pressure max 10 Bar
Flow rate 1040 l/min
Power 7,5 Kw/10 Hp
EQUIPPED WITH:
-Tank
-Dryer
USED MACHINE
CUTTING SAW CROSS
JIB CRANE KG 1.000
N.1 MAGNETIC CHUCK 770x360
SAW BAND THOMAS MOD. 310I
THOMAS
09849
SEMI-AUTOMATIC
Cutting capacity:
-90° round 210 mm, square 220x200 mm, rectangle 300x190 mm
-45° right round 180 mm, square 170x170 mm, rectangle...
09849
SEMI-AUTOMATIC
Cutting capacity:
-90° round 210 mm, square 220x200 mm, rectangle 300x190 mm
-45° right round 180 mm, square 170x170 mm, rectangle...
PLATFORM 600
09900
4 indipendent grippers
Diameter 600 mm
Direct attachment ASA 15
USED EQUIPMENT
4 indipendent grippers
Diameter 600 mm
Direct attachment ASA 15
USED EQUIPMENT
.JPG)
ANGULAR PLATE 600x1650
07789
Dimension 600x1.650 mm
Base 600x650 mm
USED EQUIPMENT
Dimension 600x1.650 mm
Base 600x650 mm
USED EQUIPMENT
GRINDING DELTA MOD. LB300
10116
Distance between column axis and wheel axis mm 300
Max distance between table-level and wheel mm 280
Max grinding surface mm 140x300
Rapid feed for...
Distance between column axis and wheel axis mm 300
Max distance between table-level and wheel mm 280
Max grinding surface mm 140x300
Rapid feed for...
TAGLIA BULINI MEC SYSTEM
MEC SYSTEM
09668
TIPO VERTEX
PRECISION HEAD-GROUND PUNCHES
Working range:
-Max. diameter 25x500 mm
-Minimum length 60 mm
USED MACHINE
AVAILABLE N.2 PIECES
09668
TIPO VERTEX
PRECISION HEAD-GROUND PUNCHES
Working range:
-Max. diameter 25x500 mm
-Minimum length 60 mm
USED MACHINE
AVAILABLE N.2 PIECES
DRYER CDX18:
CECCATO
09847
Pressure max bar 16
FAD l/min 1825
FAD m3/h 109
W 284
Volt/Hz/Ph 230/50/1
Gas/DN 3/4'' M
Approx. weight Kg 27
Approx. overall dimensions (LxWxH) mm...
09847
Pressure max bar 16
FAD l/min 1825
FAD m3/h 109
W 284
Volt/Hz/Ph 230/50/1
Gas/DN 3/4'' M
Approx. weight Kg 27
Approx. overall dimensions (LxWxH) mm...
.jpeg)
DIVIDING HEAD H 135
09452
WITH TAILSTOCK
SELF-CENTERING DIAMETER 200 D.G. 3+3
USED MATERIAL
WITH TAILSTOCK
SELF-CENTERING DIAMETER 200 D.G. 3+3
USED MATERIAL
ANGULAR PLATE 700x900
08865
Dimension 700x900 mm
Base 900x360 mm
With T slot on the front and on top
USED EQUIPMENT
Dimension 700x900 mm
Base 900x360 mm
With T slot on the front and on top
USED EQUIPMENT
GRINDING SURFACE DELTA MOD. LA 300
DELTA
09405
Distance between column axis and wheel axis mm 300
Max. distance between table-level and wheel mm 280
Max. grindable surface mm 140x330
Size of the...
09405
Distance between column axis and wheel axis mm 300
Max. distance between table-level and wheel mm 280
Max. grindable surface mm 140x330
Size of the...
.jpeg)
JIB CRANE KG 1.000
DIVIDING HEAD 500
09496
Plate diameter 500 mm
Graduated 360 degrees table
Equipped with self-centering spindle with 3 clamps diameter 310 mm 3+3 DG
USED MATERIAL
Plate diameter 500 mm
Graduated 360 degrees table
Equipped with self-centering spindle with 3 clamps diameter 310 mm 3+3 DG
USED MATERIAL
.JPG)
FIXED STEADY REST DIAMETER 320 mm
10201
Fixed steady rest for lathe machine
Material cast iron
Diameter maximum 320 mm
USED EQUIPMENT
Fixed steady rest for lathe machine
Material cast iron
Diameter maximum 320 mm
USED EQUIPMENT
FIXED STEADY REST DIAMETER 380 mm
10202
Fixed steady rest for lathe machine
Diameter 380 mm
USED EQUIPMENT
Fixed steady rest for lathe machine
Diameter 380 mm
USED EQUIPMENT
SELF-CENTERING DIAM 315
10200
Self-centering with 3 clamps
MARIO PINTO 3+3+3 DG
Diameter 315 mm
Hole 110 mm
Complete of:
- Flange CAM-LOCK 8"
USED EQUIPMENT
Self-centering with 3 clamps
MARIO PINTO 3+3+3 DG
Diameter 315 mm
Hole 110 mm
Complete of:
- Flange CAM-LOCK 8"
USED EQUIPMENT
SAW BAND HOLZ KRAFT HBS 433 SAW
HOLZ KRAFT
10428
VERTICAL
Table dimensions 610 x 431 mm
Speed 900 - 450 m/min
Motor power 1.5 kW
Max cutting height 270 mm
Weight 130 kg
Overall dimensions 768 x...
10428
VERTICAL
Table dimensions 610 x 431 mm
Speed 900 - 450 m/min
Motor power 1.5 kW
Max cutting height 270 mm
Weight 130 kg
Overall dimensions 768 x...
SELF-CENTERING 250BH
09903
SMW AUTOBLOCK
Hydraulic self-centerer with 3 clamps
Diameter 250 mm
Base clamps
USED EQUIPMENT
SMW AUTOBLOCK
Hydraulic self-centerer with 3 clamps
Diameter 250 mm
Base clamps
USED EQUIPMENT
SPINDLE SPEED MULTIPLIERS
WELDING MIG/MAG INE MM382
INE
09758
Power supply 3x400V
Duty cycle 60% 380
Duty cycle 100% 290
Max absorption kVA 17
Total weight 190 kg
USED MACHINE
09758
Power supply 3x400V
Duty cycle 60% 380
Duty cycle 100% 290
Max absorption kVA 17
Total weight 190 kg
USED MACHINE
WORKING TABLE MM 1600x800x930H
09926
WITH DOUBLE DRAWER CHEST
AND 14 DRAWERS
USED MATERIAL
WITH DOUBLE DRAWER CHEST
AND 14 DRAWERS
USED MATERIAL
ANGULAR PLATE 700x600
08207
Dimension 700x600H mm
Base dimensions 700x200 mm
USED EQUIPMENT
Dimension 700x600H mm
Base dimensions 700x200 mm
USED EQUIPMENT
CUBE 250 X 250 X 432
09498
Cube base 510 x 510 mm
Dimensions 250 x 250 x 432 mm
45 holes per side
N.2 cubes available
Hiles and threads M16
USED MACHINE
Cube base 510 x 510 mm
Dimensions 250 x 250 x 432 mm
45 holes per side
N.2 cubes available
Hiles and threads M16
USED MACHINE
DRYER FINI MOD.RD49/AC
FINI
09592
Nominal flow rate l/min 4900
Max air pressure bar 14
Max intel air temperature °C 55
Ambient temperature °C 1-45
Electric supply ph/V/Hz...
09592
Nominal flow rate l/min 4900
Max air pressure bar 14
Max intel air temperature °C 55
Ambient temperature °C 1-45
Electric supply ph/V/Hz...
LOAD BALANCER 1 TON.
09573
Lenght 4 meters
2 ganci
USED MATERIAL
AVAILABLE N.02 PIECES
Lenght 4 meters
2 ganci
USED MATERIAL
AVAILABLE N.02 PIECES
CHAMFERING ACETI MOD. 105
ACETI
09555
Grinding wheel dimensions 200x20x25 mm thickness
Max grinding wheel speed m/s 30
Engine rpm 1400:2800
Power kW 1.1
Weight 110 kg
Overall dimensions...
09555
Grinding wheel dimensions 200x20x25 mm thickness
Max grinding wheel speed m/s 30
Engine rpm 1400:2800
Power kW 1.1
Weight 110 kg
Overall dimensions...
DRILLING FAMUP MOD. RAG 40
FLOOR WASHING MACHINE COMAC
GAUGE BLOCKS
09484
Kit of 47 pieces, grade 1
From 1 to 100 mm
Mitutoyo
USED MATERIAL
Kit of 47 pieces, grade 1
From 1 to 100 mm
Mitutoyo
USED MATERIAL
PLATEAU 400 4 CLAMPS
08305
4 indipendent clamps
Diameter 400 mm
Attachment CAM-LOCK 8"
USED EQUIPMENT
4 indipendent clamps
Diameter 400 mm
Attachment CAM-LOCK 8"
USED EQUIPMENT
PLATEAU 500 4 CLAMPS
08301
4 indipendent clamps
Diameter 500 mm
Attachment CAM-LOCK 6"
USED EQUIPMENT
4 indipendent clamps
Diameter 500 mm
Attachment CAM-LOCK 6"
USED EQUIPMENT
PLATEAU 500 LAMBERTINI
08304
4 indipendent clamps
Diameter 500 mm
USED EQUIPMENT
4 indipendent clamps
Diameter 500 mm
USED EQUIPMENT
ROTARY TABLE 200 mm
09500
Positioning horizontal - vertical
With
Selfcenter spindle 3 jaw Mario Pinto diameter mm 200
USED MACHINE
Positioning horizontal - vertical
With
Selfcenter spindle 3 jaw Mario Pinto diameter mm 200
USED MACHINE
SELF-CENTERING MARIO PINTO
09450
Diameter 190 D.G. 3+3+3
With C.L. 5"
USED MATERIAL
Diameter 190 D.G. 3+3+3
With C.L. 5"
USED MATERIAL
CHAMFERING MACHINE SCU
08762
Speed rpm 2800
Power HP 0,50
Wheel dimensions mm 150x16x20
USED MACHINE
Speed rpm 2800
Power HP 0,50
Wheel dimensions mm 150x16x20
USED MACHINE
PLATEU 400 4 CLAMPS
08306
4 indipendent clamps
Diameter 400 mm
Attachment CAM-LOCK 8"
USED EQUIPMENT
4 indipendent clamps
Diameter 400 mm
Attachment CAM-LOCK 8"
USED EQUIPMENT
SELF-CENTERING CHUCK MARIO PINTO
09448
Diameter 200 D.G. 3+3
With flange CAM-LOCK 5"
USED MATERIAL
Diameter 200 D.G. 3+3
With flange CAM-LOCK 5"
USED MATERIAL
TWO-DOOR CABINET 715 X 750 X 1.450
09343
With 4 drawers and a cone storage drawer
USED EQUIPMENT
With 4 drawers and a cone storage drawer
USED EQUIPMENT
BENCH DRILLING LTF TB-16
LTF
09842
Max drilling capacity diameter mm 16
Spindle taper CM2
Quill stroke mm 80
Spindle speed rpm 190-2800
Column diameter mm 80
Worktable dimensions mm...
09842
Max drilling capacity diameter mm 16
Spindle taper CM2
Quill stroke mm 80
Spindle speed rpm 190-2800
Column diameter mm 80
Worktable dimensions mm...
DRYER ABAC EA 2.200
08454
Compressed-air dryer
Refrigerating R134a-0,27 Kg
Air capacity 2.200 liters/min
Power 740 W
Max pressure 16 bar
USED MACHINE
Compressed-air dryer
Refrigerating R134a-0,27 Kg
Air capacity 2.200 liters/min
Power 740 W
Max pressure 16 bar
USED MACHINE
PLATEAU 350 4 CLAMPS
08309
4 indipendent clamps
Diameter 350 mm
Attachment CAM-LOCK 6"
USED EQUIPMENT
4 indipendent clamps
Diameter 350 mm
Attachment CAM-LOCK 6"
USED EQUIPMENT
MICROMETER MICRON TECHNOLOGY
09490
Centesimal est
400-500 mm
For external use
USED MATERIAL
Centesimal est
400-500 mm
For external use
USED MATERIAL
MICROMETER MICRON TECHNOLOGY
09486
Centesimal est
300-400 mm
For external use
USED MATERIAL
Centesimal est
300-400 mm
For external use
USED MATERIAL
ROTATING TAILSTOCK FBR
09454
With locking ring in housing
Unspecified load
With interchangeable points
Attachment C.M.3
With bore expander 4/3 Cm
USED MATERIAL
With locking ring in housing
Unspecified load
With interchangeable points
Attachment C.M.3
With bore expander 4/3 Cm
USED MATERIAL
ROTATING TAILSTOCK FBR
09453
With locking ring in housing
With interchangeable points
Attachment C.M.4 - variable load
NEW MATERIAL
With locking ring in housing
With interchangeable points
Attachment C.M.4 - variable load
NEW MATERIAL
CHUCK 4 JAWS DIAM 250
08292
Diameter mm 250
EQUIPPED WITH:
Backplate cam-lock 6''
USED EQUIPMENT
Diameter mm 250
EQUIPPED WITH:
Backplate cam-lock 6''
USED EQUIPMENT
CONE CARRIER CART
09502
Cone carrier cart ISO 40
Complete of 50 axel bearings
Equipped with a side shelf
USED MATERIAL
Cone carrier cart ISO 40
Complete of 50 axel bearings
Equipped with a side shelf
USED MATERIAL
PRESETTER ALPA PS 4000
ALPA
07327
FOR TOOLS
Axis Z vertical stroke mm 400
Axis Y cross stroke mm 200
EQUIPPED WITH:
Optical contour projector
Digital read out
USED MACHINE
07327
FOR TOOLS
Axis Z vertical stroke mm 400
Axis Y cross stroke mm 200
EQUIPPED WITH:
Optical contour projector
Digital read out
USED MACHINE
TIG WELDING MACHINE STEL TIG uP 161h
STEL
08397
ZONE OF CURRENT RANGE 5 - 160 A
POWER SUPPLY 220V - 50Hz
MAX CURRENT FLOW 160 A
USED MACHINE
08397
ZONE OF CURRENT RANGE 5 - 160 A
POWER SUPPLY 220V - 50Hz
MAX CURRENT FLOW 160 A
USED MACHINE
DRAWER CHEST MM 720x720x850H
09917
6 DRAWERS
USED MATERIAL
(N.3 PIECES AVAILABLES)
6 DRAWERS
USED MATERIAL
(N.3 PIECES AVAILABLES)
Internal Analogue micrometer 3 point
Internal Analogue micrometer 3 point
MICROMETERS MICRON TECHNOLOGY
09487
Kit
Centesimal est
0-150mm
For internal use
USED MATERILAS
Kit
Centesimal est
0-150mm
For internal use
USED MATERILAS
PUNCHER CUTTER STB S13
MICROMETER MEDORI
09470
Internal use
3 bits
Precision 0,005 mm
40-50 mm
USED MATERIAL
Internal use
3 bits
Precision 0,005 mm
40-50 mm
USED MATERIAL
MICROMETER MITUTOYO
09489
Est. centesimal
125-150 mm
External use
USED MATERIALS
Est. centesimal
125-150 mm
External use
USED MATERIALS
GREEN CART
09341
Dimensions 1.000 x 800 mm
Wooden countertop
Two shelves
USED EQUIPMENT
Dimensions 1.000 x 800 mm
Wooden countertop
Two shelves
USED EQUIPMENT
MICROMETER MICRON TECHNOLOGY
09483
Centesimal
275-300 mm
External use
USED MATERIAL
Centesimal
275-300 mm
External use
USED MATERIAL
MICROMETER MICRON TECHNOLOGY
09481
Centesimal
225-250 mm
External use
USED MATERIAL
Centesimal
225-250 mm
External use
USED MATERIAL
MICROMETER MICRON TECHNOLOGY
09480
Centesimal
200-225 mm
External
USED MATERIAL
Centesimal
200-225 mm
External
USED MATERIAL
CONES ISO 50
HORIZONTAL BROACHING MACHINE TGW HK270
10368
Stroke mm 1000
EQUIPPED WITH:
-VARIOUS SIZE INTERCHANGEABLE BROACH HEADS & BROACHES
USED MACHINE
Stroke mm 1000
EQUIPPED WITH:
-VARIOUS SIZE INTERCHANGEABLE BROACH HEADS & BROACHES
USED MACHINE
PORTAL GRINDING MACHINE WALDRICH 6000
06561
CNC Siemens 840 D
Strokes mm 8500x1700x1500
USED MACHINE RETROFITTED IN 2008
CNC Siemens 840 D
Strokes mm 8500x1700x1500
USED MACHINE RETROFITTED IN 2008
Portal grinding machine WALDRICH COBURG
06717
CNC SIEMENS 840 RETROFITTED IN 2010
Longitudinal travel mm 7200
Cross travel mm 2000
Vertical travel mm 1000
USED MACHINE
CNC SIEMENS 840 RETROFITTED IN 2010
Longitudinal travel mm 7200
Cross travel mm 2000
Vertical travel mm 1000
USED MACHINE
PRESSURE WASHER PULITECNO
VIBRATOR ROLLWASCH AFOCOP SA 550
FLOOR TYPE BORING PAMA SPEEDRAM 2000
PAMA
07081
HEIDENHAIN iTNC 530 CNC Controls (7-Axis)
CAPACITY:
Spindle Diameter 160 mm
Spindle Taper ISO #50 (Big Plus)
Vertical Travel of Head, Y-Axis 5000...
07081
HEIDENHAIN iTNC 530 CNC Controls (7-Axis)
CAPACITY:
Spindle Diameter 160 mm
Spindle Taper ISO #50 (Big Plus)
Vertical Travel of Head, Y-Axis 5000...
BORING PAMA SPEEDRAM 1000
PAMA
09195
FLOOR TYPE
HYDROSTATIC
CNC SIEMENS 840D
LONGITUDINAL AXIS - BASEMENT/CARRIAGE (X AXIS):
Stroke 9000 mm
Rapid feed mm/min. 30,000
VERTICAL AXIS -...
09195
FLOOR TYPE
HYDROSTATIC
CNC SIEMENS 840D
LONGITUDINAL AXIS - BASEMENT/CARRIAGE (X AXIS):
Stroke 9000 mm
Rapid feed mm/min. 30,000
VERTICAL AXIS -...
BORING PAMA SPEEDRAM 4
PAMA
07883
FLOOR TYPE HYDROSTATIC
CNC SIEMENS SINUMERIC 840C
Axis X stroke mm 10.000
Axis Y stroke mm 5.000
Axis Z stroke mm 1.000
Axis W storke mm 1.200
Quill...
07883
FLOOR TYPE HYDROSTATIC
CNC SIEMENS SINUMERIC 840C
Axis X stroke mm 10.000
Axis Y stroke mm 5.000
Axis Z stroke mm 1.000
Axis W storke mm 1.200
Quill...
MILLING GANTRY/PORTAL PIETRO CARNAGHI MOD. UNIMILL 35 CA
PIETRO CARNAGHI
09396
CNC SIEMENS
TECHNICAL DETAILS:
Distance between frames mm 3500
Maximum height between table top and spindle nose mm 1850
Working table dimensions mm...
09396
CNC SIEMENS
TECHNICAL DETAILS:
Distance between frames mm 3500
Maximum height between table top and spindle nose mm 1850
Working table dimensions mm...
BORING FRORIEP M.M. 160
FRORIEP
06524
Spindle diameter mm 160
Column longitudinal travel X axis mm 16.000
Vertical headstock travel Y axis mm 4000/ 4200
Spindle travel axis Z mm...
06524
Spindle diameter mm 160
Column longitudinal travel X axis mm 16.000
Vertical headstock travel Y axis mm 4000/ 4200
Spindle travel axis Z mm...
.JPG)
EXTERNAL GRINDER GIORIA R150 8000 CNC
GIORIA
07436
CNC Siemen Sinumerik 820G
Max swing diameter mm 900
Max grinding diameter mm 900
Max grinding length 8000 mm
Max weight admitted between centers Kg...
07436
CNC Siemen Sinumerik 820G
Max swing diameter mm 900
Max grinding diameter mm 900
Max grinding length 8000 mm
Max weight admitted between centers Kg...
.jpg)
LATHE DOOSAN PUMA VTR1620M
DOOSAN
09333
CNC FANUC i PLUS
CAPACITY:
Swing over bed mm 2100
Max turning diameter mm 2000
Max turning height mm 1800
Max allowable worpiece weight Kg...
09333
CNC FANUC i PLUS
CAPACITY:
Swing over bed mm 2100
Max turning diameter mm 2000
Max turning height mm 1800
Max allowable worpiece weight Kg...
.JPG)
FLOOR TYPE FPT RONIN EVO
FPT
10153
MOVING COLUMN MILLING MACHINE
FPT MOD. RONIN EVO
CNC Heidenhain 640
X-axis travel 6.000 mm
Y-axis travel (Vertical) 2.500 mm
Z-axis travel 1.250...
10153
MOVING COLUMN MILLING MACHINE
FPT MOD. RONIN EVO
CNC Heidenhain 640
X-axis travel 6.000 mm
Y-axis travel (Vertical) 2.500 mm
Z-axis travel 1.250...
VERTICAL LATHE TOS HULIN
TOS HULIN
08618
POWERTURN 1600
CNC SIEMENS 840D
Turning diameter mm 2000
Max piece diameter mm 2000
Max turning height mm 1150
Max pallet load Kg 5000
RAM stroke mm...
08618
POWERTURN 1600
CNC SIEMENS 840D
Turning diameter mm 2000
Max piece diameter mm 2000
Max turning height mm 1150
Max pallet load Kg 5000
RAM stroke mm...
LATHE VICTOR MOD. VT-45/325YC
VICTOR
09026
WITH LIVE TOOLS AND Y AXIS
TECHNICAL DETAILS:
Axis:
Distance between centre 3425 mm
Max swing diameter 780 mm
Max turning diameter 600 mm
Axis X...
09026
WITH LIVE TOOLS AND Y AXIS
TECHNICAL DETAILS:
Axis:
Distance between centre 3425 mm
Max swing diameter 780 mm
Max turning diameter 600 mm
Axis X...
BORING "T" TYPE TOS VARNSDORF
TOS
06972
MOD. WHQ 13 CNC
CNC HEIDENHAIN iTNC 530
STROKE:
-Axis X 3500 mm
-Axis Y 2500 mm
-Axis Z 1250 mm
-Axis W 800 mm
TABLE:
-Rotary table dimensions mm...
06972
MOD. WHQ 13 CNC
CNC HEIDENHAIN iTNC 530
STROKE:
-Axis X 3500 mm
-Axis Y 2500 mm
-Axis Z 1250 mm
-Axis W 800 mm
TABLE:
-Rotary table dimensions mm...
CENTER ZPS MOD. MCG 1000 5XT
ZPS
09286
5 AXIS
CNC Heidenhain TNC 640
Clamping area of table 1000 mm
Max weight of workpiece 1300 kg
Travel X-axis 1200 mm
Travel Y-axis 1000 mm
Travel...
09286
5 AXIS
CNC Heidenhain TNC 640
Clamping area of table 1000 mm
Max weight of workpiece 1300 kg
Travel X-axis 1200 mm
Travel Y-axis 1000 mm
Travel...
LATHE KRAMATORSK 850x16.000
KRAMATORSK
07291
MOD. 1A665 4 guide
Height of center mm 850
Distance between center mm 16000
Max diameter on bed mm 1600
Max diameter over carriage mm 1250
Bed width...
07291
MOD. 1A665 4 guide
Height of center mm 850
Distance between center mm 16000
Max diameter on bed mm 1600
Max diameter over carriage mm 1250
Bed width...
MILLING FPT MOD. SIRIO-M
FPT
09173
MOBILE MAST
CNC HEIDENHAIN TNC 426M
Machine built entirely in cast iron with hydrostatic sliding guides
Longitudinal stroke X axis 10.000 mm
Vertical...
09173
MOBILE MAST
CNC HEIDENHAIN TNC 426M
Machine built entirely in cast iron with hydrostatic sliding guides
Longitudinal stroke X axis 10.000 mm
Vertical...
BORING TOS VARNDOSRF MOD. WRD 130Q
TOS VARNSDORF
09194
FLOOR TYPE
CNC ECS 2700D
Spindle diameter mm 130
Spindle taper ISO 50
Spindle speed rpm 10-2500 (3000 in S6)
Spindle motor power kW 37
Max torque...
09194
FLOOR TYPE
CNC ECS 2700D
Spindle diameter mm 130
Spindle taper ISO 50
Spindle speed rpm 10-2500 (3000 in S6)
Spindle motor power kW 37
Max torque...
VERTICAL LATHE 2700 CNC -TFM
CNC-TFM
06207
MACHINE DESCRIPTION
Vertical lathe double column CNC with accurate positioning system and table clamping which enable, besides traditional turning...
06207
MACHINE DESCRIPTION
Vertical lathe double column CNC with accurate positioning system and table clamping which enable, besides traditional turning...
LATHE POREBA MOD. TCG 200 mm 17000
POREBA
06289
height of centre mm 1000
Max turning diameter over bed mm 2000
Max turning diameter over toolholder carriage mm 1680
Turning lenght mm 17.000
Max...
06289
height of centre mm 1000
Max turning diameter over bed mm 2000
Max turning diameter over toolholder carriage mm 1680
Turning lenght mm 17.000
Max...
BENDING ROLL FACCIN MOD. HAV3172
FACCIN
06100
HYDRAULIC 3 ROLLS
ROLLS SIZE:
Upper roll diameter mm 720
Side roll diameter mm 650
CAPACITIES:
Bending capacity (all table) mm 100
Pre-bending...
06100
HYDRAULIC 3 ROLLS
ROLLS SIZE:
Upper roll diameter mm 720
Side roll diameter mm 650
CAPACITIES:
Bending capacity (all table) mm 100
Pre-bending...
.JPG)
MILLING/BORING ZAYER MOD. KCU 8000x2500
ZAYER
07740
CNC HEIDENHAIN 407
Axis X stroke mm 8025
Axis Y stroke mm 1263
Axis Z stroke (vertical) mm 2502
Axia V stroke table mm 1200
Tool taper ISO 50
Spindle...
07740
CNC HEIDENHAIN 407
Axis X stroke mm 8025
Axis Y stroke mm 1263
Axis Z stroke (vertical) mm 2502
Axia V stroke table mm 1200
Tool taper ISO 50
Spindle...
5 AXIS CENTER EUMACH UMC 1000
EUMACH
09972
CNC control HEIDENHAIN iTNC 530 HSCI
5 simultaneous axes
Stroke X axis 1000 mm
Stroke Y axis 800 mm
Stroke Z axis 700 mm
Feed rate on X, Y and Z...
09972
CNC control HEIDENHAIN iTNC 530 HSCI
5 simultaneous axes
Stroke X axis 1000 mm
Stroke Y axis 800 mm
Stroke Z axis 700 mm
Feed rate on X, Y and Z...
LATHE YOUJI VTL 1200 ATC+C
YOUJI
06710
AXIS C
CNC FANUC 18 i TB
WORKING AREA:
-Table diameter mm 1200
-Max swing diameter mm 1600
-Max turning diameter mm 1400
-Max turning height mm...
06710
AXIS C
CNC FANUC 18 i TB
WORKING AREA:
-Table diameter mm 1200
-Max swing diameter mm 1600
-Max turning diameter mm 1400
-Max turning height mm...
.JPG)
LASER TRUMPF TRUMATIC L 4050
TRUMPF
08167
Laser power 6000 W CO/2
Working size mm 4000 x 2000
Laser unit: laser CO2 TLF 6000
EQUIPED WITH:
-LIFT MASTER
USED MACHINE
08167
Laser power 6000 W CO/2
Working size mm 4000 x 2000
Laser unit: laser CO2 TLF 6000
EQUIPED WITH:
-LIFT MASTER
USED MACHINE
Horizontal machining centre MCM mod. CLOCK 800 MP4
MCM
06779
CN Fanuc 16i
No. 4 Pallet 630x630
Longitudinal X axis mm 700
Vertical Y axis mm 700
Cross Z axis mm 800
Ingombro di rotazione mm 900
Spindle...
06779
CN Fanuc 16i
No. 4 Pallet 630x630
Longitudinal X axis mm 700
Vertical Y axis mm 700
Cross Z axis mm 800
Ingombro di rotazione mm 900
Spindle...
Eumach UMC 1000 Machine center
EUMACH
09167
CNC control Heidenhain iTNC 530
5-axis simultaneous interpolation
X travel 1000 mm
Y travel 800 mm
Z travel 700 mm
Rotary table 1000 x 800 mm
Max...
09167
CNC control Heidenhain iTNC 530
5-axis simultaneous interpolation
X travel 1000 mm
Y travel 800 mm
Z travel 700 mm
Rotary table 1000 x 800 mm
Max...
LATHE CNC COMEV TITANO 65 EVO
COMEV
09607
CNC D-Electron Z32
Center height 650 mm
Swing diameter on the bed mm 1300
Swing diameter on the cross slide 1320 mm
Distance between centers 8000...
09607
CNC D-Electron Z32
Center height 650 mm
Swing diameter on the bed mm 1300
Swing diameter on the cross slide 1320 mm
Distance between centers 8000...
.jpeg)
CENTER MORI SEIKI MOD. NH-6300 DG
MORI SEIKI
08864
HORIZONTAL 8 PALLET
STROKES:
Axis X stroke mm 900
Axis Y stroke mm 800
Axis Z stroke mm 980
Distance between table / spindle center line mm...
08864
HORIZONTAL 8 PALLET
STROKES:
Axis X stroke mm 900
Axis Y stroke mm 800
Axis Z stroke mm 980
Distance between table / spindle center line mm...
MILLING NOVAR RUNNER 1200
NOVAR
09310
CNC SELCA 3045 P
TABLE:
Rotary table dimensions mm 1000x1200
T-slots n.7
T-slots width mm 18
T-slots distance mm 120
Load Kg 3500
AXIS:
Axis X stroke...
09310
CNC SELCA 3045 P
TABLE:
Rotary table dimensions mm 1000x1200
T-slots n.7
T-slots width mm 18
T-slots distance mm 120
Load Kg 3500
AXIS:
Axis X stroke...
MILLING SORALUCE SLP-8000
SORALUCE
08612
CNC HEIDENHAIN H426
TABLE:
Table dimensions mm 8000x1350
Table height (from floor) mm 950
T-slot n.9
Distance between T-slots mm 150
T-slots width mm...
08612
CNC HEIDENHAIN H426
TABLE:
Table dimensions mm 8000x1350
Table height (from floor) mm 950
T-slot n.9
Distance between T-slots mm 150
T-slots width mm...
CENTER MAKINO MOD. MCB 1310
MAKINO
07937
HORIZONTAL MULTIPALLET
CNC FANUC 16 MC
DIMENSIONS:
Pallet number 8+1 (with fifth tilting axis diameter 650 mm)
Pallet dimensions 800x800 mm
Max...
07937
HORIZONTAL MULTIPALLET
CNC FANUC 16 MC
DIMENSIONS:
Pallet number 8+1 (with fifth tilting axis diameter 650 mm)
Pallet dimensions 800x800 mm
Max...
.JPG)
LASER MITSUBISHI CO2
MITSUBISHI
08169
PROCESSING SYSTEM ML3015EX-45CF-R
MACHINE TYPE:
Optical mobile system, two pallet interchangable, one pallet manual
Cross-flow resonator...
08169
PROCESSING SYSTEM ML3015EX-45CF-R
MACHINE TYPE:
Optical mobile system, two pallet interchangable, one pallet manual
Cross-flow resonator...
CENTER EUMACH LBM 2000-
EUMACH
08768
BSE 2200
CNC FIDIA nC19
STROKES:
Axis X stroke mm 2200
Axis Y stroke mm 1750
Axis Z stroke mm 750
Distance between columns mm 1750
TABLE:
Table...
08768
BSE 2200
CNC FIDIA nC19
STROKES:
Axis X stroke mm 2200
Axis Y stroke mm 1750
Axis Z stroke mm 750
Distance between columns mm 1750
TABLE:
Table...
LATHE DOOSAN PUMA VT900
DOOSAN
07819
CNC FANUC 21i-TB
CAPACITY
Max swing over bed mm 1000
Max swing over saddle mm 700
Max turning diameter over bed mm900
Max theoric lenght mm 850
Max...
07819
CNC FANUC 21i-TB
CAPACITY
Max swing over bed mm 1000
Max swing over saddle mm 700
Max turning diameter over bed mm900
Max theoric lenght mm 850
Max...
MILLING SORALUCE TA 35
SORALUCE
07945
CNC HEIDENHAIN iTNC 530
Axis X stroke mm 3500
Axis Y stroke mm 1000
Axis Z stroke mm 1250
Table dimension mm 3700x850
Spindle taper ISO 50
Spindle...
07945
CNC HEIDENHAIN iTNC 530
Axis X stroke mm 3500
Axis Y stroke mm 1000
Axis Z stroke mm 1250
Table dimension mm 3700x850
Spindle taper ISO 50
Spindle...
AUTOMATIC CENTRE LATHE POREBA MOD. TR2D-93 CNC
POREBA
06512
TECHNICAL DATA:
-Height of centre mm 465
-Swing over bed mm 930
-Swing over carriage mm 570
-Turning lenght mm 3000
-Max mass...
06512
TECHNICAL DATA:
-Height of centre mm 465
-Swing over bed mm 930
-Swing over carriage mm 570
-Turning lenght mm 3000
-Max mass...
.jpg)
MILLING KIHEUNG MOD. U1000
KIHEUNG
07564
CNC Heidenhain 530
STROKES:
Longitudinal stroke mm 4100
Cross stroke mm 1000
Vertical stroke mm 1350
TABLE:
Working surface mm 4500x900
Max...
07564
CNC Heidenhain 530
STROKES:
Longitudinal stroke mm 4100
Cross stroke mm 1000
Vertical stroke mm 1350
TABLE:
Working surface mm 4500x900
Max...
.JPG)
MILLING SACHMAN T 314 HS
SACHMAN
09461
CNC SELCA 4045PD + Handwheel Selbox
STROKES:
Longitudinal stroke X-axis mm 3500
Cross stroke Y-axis mm 1600
Vertical stroke Z-axis mm...
09461
CNC SELCA 4045PD + Handwheel Selbox
STROKES:
Longitudinal stroke X-axis mm 3500
Cross stroke Y-axis mm 1600
Vertical stroke Z-axis mm...
VERTICAL LATHE VEMAC MOD. SCT 17 CN
VEMAC
07259
CNC FAGOR 8055
Max workpiece diameter mm 1700
Paltform diameter mm 1450
Max workpiece weight Ton 12
Max workpiece height mm 1500
Spinle speed Rpm...
07259
CNC FAGOR 8055
Max workpiece diameter mm 1700
Paltform diameter mm 1450
Max workpiece weight Ton 12
Max workpiece height mm 1500
Spinle speed Rpm...
MILLNG FPT SIRIO M
FPT
09165
HYDROSTATIC
CNC HEIDENHAIN TNC 426CB
X axis travel 4000 mm
Y axis travel 2000 mm
Z axis travel 1200 mm
Max head revolutions 3000 , ISO 50 DIN...
09165
HYDROSTATIC
CNC HEIDENHAIN TNC 426CB
X axis travel 4000 mm
Y axis travel 2000 mm
Z axis travel 1200 mm
Max head revolutions 3000 , ISO 50 DIN...
LATHE HYUNDAI WIA LV1100RM
HYUNDAI WIA
07893
LIVE TOOLS
CNC Fanuc F32i
CAPACITY:
Max swing diameter mm 1355
Max turning diameter mm 1160
Max turning lenght mm 1000
STROKES:
x-Axis Travel mm 620...
07893
LIVE TOOLS
CNC Fanuc F32i
CAPACITY:
Max swing diameter mm 1355
Max turning diameter mm 1160
Max turning lenght mm 1000
STROKES:
x-Axis Travel mm 620...
MILLING KIHEUNG KNC-U1000
KIHEUNG
06971
BED TYPE
CNC HEIDENHAIN iTNC 530
TABLE:
-Table dimensions mm 3600x900
-T-slots (n.xwidth) 6x22H7
-Distance between T-slots mm 125
-Max table load kg...
06971
BED TYPE
CNC HEIDENHAIN iTNC 530
TABLE:
-Table dimensions mm 3600x900
-T-slots (n.xwidth) 6x22H7
-Distance between T-slots mm 125
-Max table load kg...
CENTER MAZAK VARIAXIS 730-5XII
MAZAK
08963
5-AXIS
PALLET CHANGE
CNC MAZATROL MATRIX
STROKES:
X axis stroke 730 mm
Y axis stroke 850 mm
Z axis strokel 560 mm
Pallet inclination axis A ...
08963
5-AXIS
PALLET CHANGE
CNC MAZATROL MATRIX
STROKES:
X axis stroke 730 mm
Y axis stroke 850 mm
Z axis strokel 560 mm
Pallet inclination axis A ...
CNC MILLING JOBS THORA TR
JOBS
09967
USED CNC MILLING MACHINE
"T" TYPE
CNC: Heidenhain 530
X-axis travel: 2.000 mm
Y-axis travel: 1.200 mm
Z-axis travel: 1.200 mm
Rotary table...
09967
USED CNC MILLING MACHINE
"T" TYPE
CNC: Heidenhain 530
X-axis travel: 2.000 mm
Y-axis travel: 1.200 mm
Z-axis travel: 1.200 mm
Rotary table...
MILLING MACHINE TIGER THS59 EVO
TIGER
08988
CNC SELCA S4060-D + Selbox S2 remote handwheel
TRANSLATING TABLE:
Table length mm 2800
Table width mm 1100
Table height 210 mm
Central T-slot...
08988
CNC SELCA S4060-D + Selbox S2 remote handwheel
TRANSLATING TABLE:
Table length mm 2800
Table width mm 1100
Table height 210 mm
Central T-slot...
MILLING PORTAL/GANTRY FPT DINO
FPT
09899
CNC HEIDENHAIN 426
Table dimensions mm 3000x1200
Table capacity kg 6000
Longitudinal X-axis stroke mm 2800
Cross Y-axis stroke mm 1600
Vertical...
09899
CNC HEIDENHAIN 426
Table dimensions mm 3000x1200
Table capacity kg 6000
Longitudinal X-axis stroke mm 2800
Cross Y-axis stroke mm 1600
Vertical...
CENTER YASDA MOD. YBM VI 40 A 5 ASSI
YASDA
07881
CNC Fanuc 31i -model A5
Axis X mm 900 longitudinal table
Axis Y mm 500 vertical spindle
Axis Z mm 450 cross column
Axis C 360 degerees table...
07881
CNC Fanuc 31i -model A5
Axis X mm 900 longitudinal table
Axis Y mm 500 vertical spindle
Axis Z mm 450 cross column
Axis C 360 degerees table...
LASER TRUMPF TLF 3000 TURBO
06795
MOD. TRUMATIC L3030
Dimensions mm 3000x1500
Power 3000 W
Automatic pallet change
USED MACHINE
MOD. TRUMATIC L3030
Dimensions mm 3000x1500
Power 3000 W
Automatic pallet change
USED MACHINE
LATHE BIGLIA MULTITASKING
BIGLIA
07112
SMART TURN B1200 EXTENDED
CNC FANUC 31i model A5
WORKING AREA:
Max swing diameter mm 750
Max turning diameter mm 500
Turning lenght mm 1500
LINEAR...
07112
SMART TURN B1200 EXTENDED
CNC FANUC 31i model A5
WORKING AREA:
Max swing diameter mm 750
Max turning diameter mm 500
Turning lenght mm 1500
LINEAR...
LATHE BIGLIA MOD. B465L S2M
BIGLIA
07862
SUB-SPINDLE
N.02 TURRETS WITH LIVE TOOLS
C AXIS CONTROLLED
CNC FANUC 31i-B
CAPACITY:
Max working bar diamerter spindle/sub-spindle mm 65(70)/45
Max...
07862
SUB-SPINDLE
N.02 TURRETS WITH LIVE TOOLS
C AXIS CONTROLLED
CNC FANUC 31i-B
CAPACITY:
Max working bar diamerter spindle/sub-spindle mm 65(70)/45
Max...
GRINDING SURFACE CHEVALIER FSG 2048
CHEVALIER
09309
MOBILE COLUMN
Control Isurface with display touchscreen 10.4''
WORKING CAPACITY:
-Max grinding lenght 1200 mm
-Max grinding width 500 mm
-Max...
09309
MOBILE COLUMN
Control Isurface with display touchscreen 10.4''
WORKING CAPACITY:
-Max grinding lenght 1200 mm
-Max grinding width 500 mm
-Max...
LATHE BIGLIA SMART TURN B1200S
BIGLIA
08439
CNC FANUC 31i-A5
WORKING AREA:
Max swing diameter mm 750
Max turning dimaeter mm 500
Max turning lenght mm 1280
LINESR AXIS:
X-Axis travel mm...
08439
CNC FANUC 31i-A5
WORKING AREA:
Max swing diameter mm 750
Max turning dimaeter mm 500
Max turning lenght mm 1280
LINESR AXIS:
X-Axis travel mm...
.JPG)
CENTER DOOSAN MO. VC 630/5AX
DOOSAN
09612
5 AXIS
CNC FANUC i SERIES
X axis stroke 650 mm
Y axis stroke 765 mm
Z axis stroke 520 mm
A axis strokel 150°
C axis stroke 360°
Table diameter...
09612
5 AXIS
CNC FANUC i SERIES
X axis stroke 650 mm
Y axis stroke 765 mm
Z axis stroke 520 mm
A axis strokel 150°
C axis stroke 360°
Table diameter...
CENTER DOOSAN MOD. ACE HP 5100
DOOSAN
06585
HORIZONTAL 7 PALLET
CNC FANUC 18i-MB
Axis X mm 850
Axis Y mm 700
Axis Z mm 750
Pallet dimensions mm 500x500
Distance spindle nose - pallet center mm...
06585
HORIZONTAL 7 PALLET
CNC FANUC 18i-MB
Axis X mm 850
Axis Y mm 700
Axis Z mm 750
Pallet dimensions mm 500x500
Distance spindle nose - pallet center mm...
CENTER MAZAK
MAZAK
09528
MOD. VARIAXIS J-600/5X
5 AXIS
CNC Mazatrol MATRIX 2
X axis stroke mm 850
Y axis stroke mm 550
Z axis stroke mm 510
C axis +/- 360
A axis...
09528
MOD. VARIAXIS J-600/5X
5 AXIS
CNC Mazatrol MATRIX 2
X axis stroke mm 850
Y axis stroke mm 550
Z axis stroke mm 510
C axis +/- 360
A axis...
CNC LATHE MAZAK INTEGREX 400 III
MAZAK
09677
WORKPIECE DIMENSIONS:
Max workpiece diameter 760 mm
Max diameter on carriage 660 mm
Max turning lenght 1504 mm
CNC
Mazatrol 640MT Pro CNC Control...
09677
WORKPIECE DIMENSIONS:
Max workpiece diameter 760 mm
Max diameter on carriage 660 mm
Max turning lenght 1504 mm
CNC
Mazatrol 640MT Pro CNC Control...
LATHE CAMU 1450 CNC
CAMU
06319
CNC ECS 4802
Table diameter 1450 mm
Swing diameter 1650 mm
Turning height 1000 mm
Max working weigth 8000 kg
Motor power 60 kw
Table speed 0-250...
06319
CNC ECS 4802
Table diameter 1450 mm
Swing diameter 1650 mm
Turning height 1000 mm
Max working weigth 8000 kg
Motor power 60 kw
Table speed 0-250...
LATHE KRAMATORSK 900x12.500
KRAMATORSK
New05081
MOD. IA600
MAX DIAMETER ON THE BED MM.1800
MAX DIAMETER OVER CARRIAGE MM.1400
LENGHT BETWEEN CENTRES MM.12500
LENGHT OVER BED MM.14300
WIDTH WORKING...
New05081
MOD. IA600
MAX DIAMETER ON THE BED MM.1800
MAX DIAMETER OVER CARRIAGE MM.1400
LENGHT BETWEEN CENTRES MM.12500
LENGHT OVER BED MM.14300
WIDTH WORKING...
.jpeg)
MILLING LAGUN MOD. GBM 26
LAGUN
09525
CNC SELCA S4045D
TABLE:
Table dimensions mm 2600x800
N. and width T-slots mm 5-22
Distance between T-slots mm 140
Weight on the table Kg...
09525
CNC SELCA S4045D
TABLE:
Table dimensions mm 2600x800
N. and width T-slots mm 5-22
Distance between T-slots mm 140
Weight on the table Kg...
MILLING MTE MOD. BF-2700
MTE
08315
CNC HEIDENHAIN iTNC-530
TABLE
Table size 2700x1000 mm
N. 7 T slots - width 22 mm
Max table load 9000 Kg
STROKE
X axis stroke 2500 mm
Y...
08315
CNC HEIDENHAIN iTNC-530
TABLE
Table size 2700x1000 mm
N. 7 T slots - width 22 mm
Max table load 9000 Kg
STROKE
X axis stroke 2500 mm
Y...
.png)
MILLING TIGER MOD. TMT 5RT
TIGER
08086
CONTROL SELCA S3045
CAPACITY
Longitudinal X travel mm 2000
Cross Y travel mm 920
Vertical Z travel mm 1570
Cross travel column V mm 1300
TABLE
Size...
08086
CONTROL SELCA S3045
CAPACITY
Longitudinal X travel mm 2000
Cross Y travel mm 920
Vertical Z travel mm 1570
Cross travel column V mm 1300
TABLE
Size...
BORING TOS WHQ 13
TOS VARNSDORF
07741
CNC HEIDENHAIN 416
Axis X mm 3500
Axis Y mm 1250
Axis Z (vertical) mm 2500
Axis W quill mm 800
Quill diameter mm 130
Table size mm 2200x1800
Loading...
07741
CNC HEIDENHAIN 416
Axis X mm 3500
Axis Y mm 1250
Axis Z (vertical) mm 2500
Axis W quill mm 800
Quill diameter mm 130
Table size mm 2200x1800
Loading...
LASER TRUMPF TRUMATIC TC L3050
TRUMPF TRUMATIC
07138
CNC TRUMPF Base SIEMENS SINUMERIK 840D
Working range:
-(X, Y) 3000x1500 mm
-Axis Z (DIAS) 100 mm
Range over path:
-In direction X -16 mm/+114...
07138
CNC TRUMPF Base SIEMENS SINUMERIK 840D
Working range:
-(X, Y) 3000x1500 mm
-Axis Z (DIAS) 100 mm
Range over path:
-In direction X -16 mm/+114...
LATHE DAEWOO PUMA 600LM
DAEWOO
08614
CNC FANUC 21i-TB
STRUCTURE:
Slant bed in cast iron, tilting 45 degrees
Prismatic guideways and counterguideways covered with antifriction material...
08614
CNC FANUC 21i-TB
STRUCTURE:
Slant bed in cast iron, tilting 45 degrees
Prismatic guideways and counterguideways covered with antifriction material...
LATHE MORANDO MOD. 3PR 8x8000
MORANDO
07909
TRADITIONAL
Monolithic basement with 3 guides
Max turning diameter mm 1850
Max diameter on carriage mm 1620
Distance between center mm 8000
Max...
07909
TRADITIONAL
Monolithic basement with 3 guides
Max turning diameter mm 1850
Max diameter on carriage mm 1620
Distance between center mm 8000
Max...
PRESS WARCOM OPERA 350-40
WARCOM
08431
CNC DELEM DA-69W
8 CONTROLLED AXES
Max working force Ton. 350
Useful bending length 4100 mm
Passage between the uprights 3550 mm
Gap depth 500 mm
Max...
08431
CNC DELEM DA-69W
8 CONTROLLED AXES
Max working force Ton. 350
Useful bending length 4100 mm
Passage between the uprights 3550 mm
Gap depth 500 mm
Max...
SURFACE GRINDER FAVRETTO 6000
FAVRETTO
07717
EASY CNC
WRKING CAPACTY
Max grinding length mm 6300
Max grinding width mm 1250
Max heigth mm 1000
GRINDER SPINDLE
Power HP/Kw 40/30
Grinding wheel...
07717
EASY CNC
WRKING CAPACTY
Max grinding length mm 6300
Max grinding width mm 1250
Max heigth mm 1000
GRINDER SPINDLE
Power HP/Kw 40/30
Grinding wheel...
HORIZONTAL MACHINING CENTRE MORI SEIKI MOD. NH 5000/40
MORI SEIKI
06756
ROTARY PALLET
CNC MORI SEIKI MSG-501
AXIS:
-Axis X mm 630
-Axis Y mm 600
-Axis Z mm 670
-Distance table surface and spindle centre mm...
06756
ROTARY PALLET
CNC MORI SEIKI MSG-501
AXIS:
-Axis X mm 630
-Axis Y mm 600
-Axis Z mm 670
-Distance table surface and spindle centre mm...
VERTICAL LATHE VTL ACME
ACME
09887
CNC ECS Touch Screen
Table size mm 2000
Max turning diameter mm 2300
Height mm 1600
Jaws hydraulic chuck
Ram travel mm 1250 with C axis
ATC 12...
09887
CNC ECS Touch Screen
Table size mm 2000
Max turning diameter mm 2300
Height mm 1600
Jaws hydraulic chuck
Ram travel mm 1250 with C axis
ATC 12...
CENTER DOOSAN MOD. DNM 750L
DOOSAN
08140
CNC FANUC serie i
STROKES:
Axis X mm 2160
Axis Y mm 762
Axis Z mm 650
TABLE:
Table dimensions mm 2160x760
Max table load Kg 1800
SPINDLE:
Spindle...
08140
CNC FANUC serie i
STROKES:
Axis X mm 2160
Axis Y mm 762
Axis Z mm 650
TABLE:
Table dimensions mm 2160x760
Max table load Kg 1800
SPINDLE:
Spindle...
COORDINATE MEASURING MACHINES ZEISS
ZEISS
08965
MOD. ACCURA II 12/42/10
5-AXIS
Bridge-type
MEASURING RANGE:
Axis X mm 1200
Axis Y mm 4200
Axis Z mm 1000
TABLE:
Dimensions mm 5000x1900x450
Height...
08965
MOD. ACCURA II 12/42/10
5-AXIS
Bridge-type
MEASURING RANGE:
Axis X mm 1200
Axis Y mm 4200
Axis Z mm 1000
TABLE:
Dimensions mm 5000x1900x450
Height...
VERTICAL LATHE DOOSAN VT 1100
DOOSAN
07826
CNC FANUC 21i-TB
CAPACITY
Swing over bed mm 1270
max. turning diameter mm 1000
Spindle center height mm 1250
MAIN SPINDLE
Spindle diameter mm 1000...
07826
CNC FANUC 21i-TB
CAPACITY
Swing over bed mm 1270
max. turning diameter mm 1000
Spindle center height mm 1250
MAIN SPINDLE
Spindle diameter mm 1000...
CENTER REMA CONTROL
REMA CONTROL
08946
MOD. NEWTON NT 3 20
CNC FANUC 31i with remote handwheel
WORKING CAPACITY:
Table dimensions mm 2100x540
T-slots (width x quantity x pitch) 18x5x100...
08946
MOD. NEWTON NT 3 20
CNC FANUC 31i with remote handwheel
WORKING CAPACITY:
Table dimensions mm 2100x540
T-slots (width x quantity x pitch) 18x5x100...
DRILLING/CUTTING LINE FICEP
FICEP
08464
CNC HOLE DRILLING TYPE 1003 DZB:
Working profiles Flats-L-U-H
Max drilling diameter 40 mm (R520N / mm2)
Max thickness 50 mm
Max weight 540 kg
SAW...
08464
CNC HOLE DRILLING TYPE 1003 DZB:
Working profiles Flats-L-U-H
Max drilling diameter 40 mm (R520N / mm2)
Max thickness 50 mm
Max weight 540 kg
SAW...
LATHE FAT TUR 1350 MN
FAT TUR
07246
CNC SIEMENS 840D
Turning diameter over bed mm 1350
Swing over cross slide mm 900
Distance between center mm 2000
USED MACHINE
YEAR 2005
07246
CNC SIEMENS 840D
Turning diameter over bed mm 1350
Swing over cross slide mm 900
Distance between center mm 2000
USED MACHINE
YEAR 2005
LATHE MORI SEIKI ZT 1500 YB
MORI SEIKI
08229
SPINDLE/SUB-SPINDLE
N.02 TURRET
AXIS Y
LIVE TOOLS
CNC MSX 501 (FANUC 18i)
WORKING AREA:
Distance between centers mm 1000
Max turning diameter mm...
08229
SPINDLE/SUB-SPINDLE
N.02 TURRET
AXIS Y
LIVE TOOLS
CNC MSX 501 (FANUC 18i)
WORKING AREA:
Distance between centers mm 1000
Max turning diameter mm...
LATHE UTITA MOD. T500CN
UTITA
09187
CNC ECS 2400
Turning diameter mm 800 over bed, mm 550 over carriage
Lenght mm 3200
Height of center mm 450
Bar passaging mm 80
Spindle taper ASA...
09187
CNC ECS 2400
Turning diameter mm 800 over bed, mm 550 over carriage
Lenght mm 3200
Height of center mm 450
Bar passaging mm 80
Spindle taper ASA...
MILLING JOBS MOD. 143
JOBS
07726
CNC FIDIA C20
Axis X stroke mm 4000
Axis Y stroke mm 2700
Axis Z stroke mm 1250
Table dimensions mm 4800x2000
Distance between column mm 2340
Axis A...
07726
CNC FIDIA C20
Axis X stroke mm 4000
Axis Y stroke mm 2700
Axis Z stroke mm 1250
Table dimensions mm 4800x2000
Distance between column mm 2340
Axis A...
MILLING LANDONIO MEC 3000/3
LANDONIO
09301
CNC SELCA S4045DH + remote handwheel
WORK STROKES:
X axis (longitudinal) 3000 mm
Y axis (cross head holder) mm 1000
Z axis (vertical) 1250...
09301
CNC SELCA S4045DH + remote handwheel
WORK STROKES:
X axis (longitudinal) 3000 mm
Y axis (cross head holder) mm 1000
Z axis (vertical) 1250...
.JPG)
MILLING/BORING ZAYER MOD. KCU 10.000x3000
ZAYER
07739
CNC HEIDENHAIN 355
Axis X stroke mm 10.000
Axis Y stroke mm 1000
Axis Z stroke (vertical) mm 3000
Tool taper ISO 50
Spindle speed min/max rpm...
07739
CNC HEIDENHAIN 355
Axis X stroke mm 10.000
Axis Y stroke mm 1000
Axis Z stroke (vertical) mm 3000
Tool taper ISO 50
Spindle speed min/max rpm...
.JPG)
ROTARY TABLE 28 TON
MECOF
10335
Table Surface Area 2.000 x 2.500 mm
Table Load Capacity 28 Ton
Table Translation 2.000 mm
USED EQUIPMENT
10335
Table Surface Area 2.000 x 2.500 mm
Table Load Capacity 28 Ton
Table Translation 2.000 mm
USED EQUIPMENT
T-TYPE BORING TOS VARNSDORF
TOS VARNSDORF
09196
MOD. WHN 130 MC
PALLET CHANGE
CNC ECS 2700D
Spindle diameter mm 130
Spindle taper ISO 50
Spindle revolutions max rpm 1800
Spindle motor power kW 37
Y...
09196
MOD. WHN 130 MC
PALLET CHANGE
CNC ECS 2700D
Spindle diameter mm 130
Spindle taper ISO 50
Spindle revolutions max rpm 1800
Spindle motor power kW 37
Y...
Vertical turning lathe TITAN SC 22
06587
- max. workpiece dia. 2150 mm
- table dia. 2000 mm
- max. height under cross rail 1500 mm
- workpiece weight 12.000 kg
- plate speed 1 - 140 rpm
-...
- max. workpiece dia. 2150 mm
- table dia. 2000 mm
- max. height under cross rail 1500 mm
- workpiece weight 12.000 kg
- plate speed 1 - 140 rpm
-...
CENTER SIGMA MOD. LEADER 6
SIGMA
07519
CNC Heidenhain 530
Axis X mm 1600
Axis Y mm 810
Axis Z mm 630
Table dimensions mm 1400x800
Tool change 40 positions - ISO 40
Spindle taper ISO...
07519
CNC Heidenhain 530
Axis X mm 1600
Axis Y mm 810
Axis Z mm 630
Table dimensions mm 1400x800
Tool change 40 positions - ISO 40
Spindle taper ISO...
CNC HEIDENHAIN iTNC 530
SIGMA
07704
Table dimensions mm 1750x770
Max load Kg 2000
Axis X stroke mm 1600
Axis Y stroke mm 810
Axis Z stroke mm 630
Spindle speed rpm 40-15000
Spindle...
07704
Table dimensions mm 1750x770
Max load Kg 2000
Axis X stroke mm 1600
Axis Y stroke mm 810
Axis Z stroke mm 630
Spindle speed rpm 40-15000
Spindle...
HORIZONTAL TUBE HONING MACHINE
ROBBI
09016
CNC
TURNING HEAD DOUBLE
Min. bore diameter mm 20
Max bore diameter mm 400
Head stroke max mm 6000
Honing length max mm 5000
Motor power kw 11...
09016
CNC
TURNING HEAD DOUBLE
Min. bore diameter mm 20
Max bore diameter mm 400
Head stroke max mm 6000
Honing length max mm 5000
Motor power kw 11...
LATHE VIPER VT-2800YM-2500
CNS
09280
CNC HORIZONTAL AXIS
AXIS Y
LIVE TOOLS
CNC FANUC 21i-TB
WORKING AREA:
Max swing diameter on the bed mm 600
Max turning diameter 390 mm
Max swing...
09280
CNC HORIZONTAL AXIS
AXIS Y
LIVE TOOLS
CNC FANUC 21i-TB
WORKING AREA:
Max swing diameter on the bed mm 600
Max turning diameter 390 mm
Max swing...
CENTER MANDELLI MOD. THUNDER 500
CONTINUOUS ROTARY TABLE COLGAR
COLGAR
06950
WITH LINEAR AXIS
(360.000 positions - axis B)
Dimensions 2000x2500 mm
Load 30 ton
Linear axis stroke W mm 2000
USED MATERIAL
06950
WITH LINEAR AXIS
(360.000 positions - axis B)
Dimensions 2000x2500 mm
Load 30 ton
Linear axis stroke W mm 2000
USED MATERIAL
.jpeg)
ERODER WIRE AGIE CHARMILLES
GF MACHINING
09211
MOD. CUT E 600
WORKING AREA:
Max dimensions of the piece (WxDxH) mm 1030x800x350
Max piece weight Kg 1000
Table dimensions 950x630 mm
Type of table...
09211
MOD. CUT E 600
WORKING AREA:
Max dimensions of the piece (WxDxH) mm 1030x800x350
Max piece weight Kg 1000
Table dimensions 950x630 mm
Type of table...
LASER CUTTING TRUMPF
LATHE DOOSAN PUMA TT1800SY
DOOSAN
08905
N.2 TURRETS
N.2 SPINDLES
LIVE TOOLS
AXIS Y
CNC FANUC 18i-TB
CAPACITY':
Max swing diameter on the bed mm 300
Max swing diameter on the carriage mm...
08905
N.2 TURRETS
N.2 SPINDLES
LIVE TOOLS
AXIS Y
CNC FANUC 18i-TB
CAPACITY':
Max swing diameter on the bed mm 300
Max swing diameter on the carriage mm...
LATHE DOOSAN PUMA VT900
DOOSAN
07820
CNC FANUC 21i-TB
CAPACITY
Max swing over bed mm 1000
Max swing over saddle mm 700
Max turning diameter over bed mm900
Max theoric lenght mm 850
Max...
07820
CNC FANUC 21i-TB
CAPACITY
Max swing over bed mm 1000
Max swing over saddle mm 700
Max turning diameter over bed mm900
Max theoric lenght mm 850
Max...
.JPG)
LATHE POTISJE PA 45/6000 DC
POTISJE
POT.45.6OOO
MONOLITHIC STRUCTURE
3 GUIDES
HEIGHT OF CENTER MM 450
DISTANCE BETWEEN CENTER MM 6000
BAR PASSAGE MM 140
DIAMETER TURNING OVER THE BED MM...
POT.45.6OOO
MONOLITHIC STRUCTURE
3 GUIDES
HEIGHT OF CENTER MM 450
DISTANCE BETWEEN CENTER MM 6000
BAR PASSAGE MM 140
DIAMETER TURNING OVER THE BED MM...
YAMAZAKI MAZAK LATHE
MAZAK
07323
MOD. QUICKTURN NEXUS 250 MSY-2
WITH LIVE TOOLS
SUBSPINDLE
Y AXIS
CNC MAZATROL MATRIX NEXUS
Distance between center 500 mm
Spindle diameter...
07323
MOD. QUICKTURN NEXUS 250 MSY-2
WITH LIVE TOOLS
SUBSPINDLE
Y AXIS
CNC MAZATROL MATRIX NEXUS
Distance between center 500 mm
Spindle diameter...
LATHE DOOSAN MOD.PUMA 500
DOOSAN
08837
CNC FANUC 32i-A
CAPACITY:
Max swing diameter over bed mm 900
Max swing diameter over carriage mm 630
Max turning diameter mm 700
Max turning lenght...
08837
CNC FANUC 32i-A
CAPACITY:
Max swing diameter over bed mm 900
Max swing diameter over carriage mm 630
Max turning diameter mm 700
Max turning lenght...
CNC LATHE CMZ TA 20 YS 640
CMZ
10348
CNC Fanuc 32i TB
Maximum turning diameter 460 mm
Maximum turning length 649 mm
Bar turning diameter 66 mm
X-axis travel mm 310
Z-axis travel mm...
10348
CNC Fanuc 32i TB
Maximum turning diameter 460 mm
Maximum turning length 649 mm
Bar turning diameter 66 mm
X-axis travel mm 310
Z-axis travel mm...
LATHE GOODWAY MOD. GS-280 YS
GOODWAY
09741
LIVE TOOLS
AXIS C, AXIS Y
SUB-SPINDLE
CNC FANUC 18i-TB
CAPACITY:
Max swing diameter 470 mm
Max turning diameter 400 mm
Max turning length 500 mm
Bar...
09741
LIVE TOOLS
AXIS C, AXIS Y
SUB-SPINDLE
CNC FANUC 18i-TB
CAPACITY:
Max swing diameter 470 mm
Max turning diameter 400 mm
Max turning length 500 mm
Bar...
.JPG)
MILLING MANDELLI MOD. REGENT 1500 H/U 2x1500
MANDELLI
07422
CNC CNM PLASMA
STROKES:
Axis X mm -750 +2600
Axis U mm +750 +2600
Axis Y mm 2000
Axis Z mm 1500
ROTARY TABLE:
Dimensions mm 1100x1250
Degrees...
07422
CNC CNM PLASMA
STROKES:
Axis X mm -750 +2600
Axis U mm +750 +2600
Axis Y mm 2000
Axis Z mm 1500
ROTARY TABLE:
Dimensions mm 1100x1250
Degrees...
ERODER WIRE SODICK
SODICK
07882
MOD. AQ 750 L PREMIUM
Max piece dimensions 1050x750x400 mm
Max piece weight 3000 kg
Working tank dimensions 1264x973 mm
Axis X mm 750
Axis Y mm 500...
07882
MOD. AQ 750 L PREMIUM
Max piece dimensions 1050x750x400 mm
Max piece weight 3000 kg
Working tank dimensions 1264x973 mm
Axis X mm 750
Axis Y mm 500...
LATHE EMCO MOD. EMCOMAT
EMCO
06961
TIPO E360x3000
WORKING AREA:
CNC FAGOR 8055
Distance between center mm 3000
Height id center mm 380
Swing over bed mm 810
Swing over cross slide mm...
06961
TIPO E360x3000
WORKING AREA:
CNC FAGOR 8055
Distance between center mm 3000
Height id center mm 380
Swing over bed mm 810
Swing over cross slide mm...
LATHE HYUNDAI WIA L2100SY-M85
HYUNDAI WIA
08127
LIVE TOOLS
SUB-SPINDLE
AXIS Y
CNC FANUC 18i-TB
CAPACITY:
Turning diameter on the bed mm 630
Turning diameter on the carriage mm 390
Max swing...
08127
LIVE TOOLS
SUB-SPINDLE
AXIS Y
CNC FANUC 18i-TB
CAPACITY:
Turning diameter on the bed mm 630
Turning diameter on the carriage mm 390
Max swing...
.JPG)
LATHE CNC DOOSAN PUMA 500
DOOSAN
08535
CNC FANUC 21i-TB
CAPACITY:
Max swing diameter over bed mm 900
Max swing diameter over carriage mm 630
Max turning diameter mm 700
Max turning lenght...
08535
CNC FANUC 21i-TB
CAPACITY:
Max swing diameter over bed mm 900
Max swing diameter over carriage mm 630
Max turning diameter mm 700
Max turning lenght...
LATHE OKUMA MOD. SPACE TURN
OKUMA
07460
LB 3000 EX (MY) Cx950
AXIS Y
LIVE TOOLS
CNC OKUMA OSP-P200L
CAPACITY:
Max swing diameter over bed mm 580
Max swing diameter over carriage mm...
07460
LB 3000 EX (MY) Cx950
AXIS Y
LIVE TOOLS
CNC OKUMA OSP-P200L
CAPACITY:
Max swing diameter over bed mm 580
Max swing diameter over carriage mm...
SHARPENING MACHINE SCHNEEBERGER MOD. GEMINI DMR
SCHNEEBERGER
07070
FOR PROFILE SPECIAL TOOLS
CNC FANUC 160i-MB
AXIS CNC:
-Axis X: Guide trasversali, corsa utile 380 mm e diam. 50 mm
-Asse Y: Guide longitudinali,...
07070
FOR PROFILE SPECIAL TOOLS
CNC FANUC 160i-MB
AXIS CNC:
-Axis X: Guide trasversali, corsa utile 380 mm e diam. 50 mm
-Asse Y: Guide longitudinali,...
HORIZONTAL CENTER MAZAK H-1250
MAZAK
07431
Pallet dimensions mm 1250x1250
Axis X stroke mm 2000
Axis Y stroke mm 1500
Axis Z stroke mm 1200
Distance between spindle to table center mm...
07431
Pallet dimensions mm 1250x1250
Axis X stroke mm 2000
Axis Y stroke mm 1500
Axis Z stroke mm 1200
Distance between spindle to table center mm...
LASER TRUMPF TRUMATIC L 3050
TRUMPF
08987
Laser power 5000 W
Working dimensions mm 3000x1550
Cutting capacity:
-Iron mm 25
-Stainless steel mm 20
-Aluminum mm 12
USED MACHINE
08987
Laser power 5000 W
Working dimensions mm 3000x1550
Cutting capacity:
-Iron mm 25
-Stainless steel mm 20
-Aluminum mm 12
USED MACHINE
LATHE CMZ MOD. TL-25 BMS
CMZ
08970
CNC FANUC 18i-TB
SPINDLE / SUB-SPINDLE
LIVE TOOLS
C-AXIS
CAPACITY:
Max swing diameter over bed mm 685
Max swing diameter on the carriage mm 510
Max...
08970
CNC FANUC 18i-TB
SPINDLE / SUB-SPINDLE
LIVE TOOLS
C-AXIS
CAPACITY:
Max swing diameter over bed mm 685
Max swing diameter on the carriage mm 510
Max...
LATHE CSF MOD. SB350Mx1600
CSF
08806
Center height 350 mm
Max turning diameter mm 630
Swing diameter on the bed mm 700
Distance between centers mm 1600
Spindle taper ASA A2-11 "
Spindle...
08806
Center height 350 mm
Max turning diameter mm 630
Swing diameter on the bed mm 700
Distance between centers mm 1600
Spindle taper ASA A2-11 "
Spindle...
LATHE DAEWOO PUMA 480L
DOOSAN
07828
CNC FANUC 21i-TB
CAPACITY
Swing over bed mm 900
Swing over saddle mm 710
Max machining dia. mm 650
Max work length mm 2042
Draw tube dia. mm...
07828
CNC FANUC 21i-TB
CAPACITY
Swing over bed mm 900
Swing over saddle mm 710
Max machining dia. mm 650
Max work length mm 2042
Draw tube dia. mm...
LATHE GEMINIS MOD. GHT 5 G2
GEMINIS
06669
Controllo numerico FANUC 21iT
CAPACITY:
Height of center mm 500
Max diameter over cross carriage mm 680
Max diameter over the bed mm 1000
Distance...
06669
Controllo numerico FANUC 21iT
CAPACITY:
Height of center mm 500
Max diameter over cross carriage mm 680
Max diameter over the bed mm 1000
Distance...
.jpg)
LATHE MAZAK QTN200 MY
MAZAK
09044
LIVE TOOLS
AXIS Y
CNC MAZATROL 640 T NEXUS
Max swing diameter mm 675
Max turning length 538 mm
Max bar turning diameter mm 65
Spindle connection ASA...
09044
LIVE TOOLS
AXIS Y
CNC MAZATROL 640 T NEXUS
Max swing diameter mm 675
Max turning length 538 mm
Max bar turning diameter mm 65
Spindle connection ASA...
LATHE TACCHI 1100x7500
TACCHI
08247
Turning diameter over bed mm 2200
Turning diameter over cross slide mm 1840
Bed lenght mm 7500
Distance between centre mm 4200
Length support of...
08247
Turning diameter over bed mm 2200
Turning diameter over cross slide mm 1840
Bed lenght mm 7500
Distance between centre mm 4200
Length support of...
MILLING DEBER DYNAMIC 2
DEBER
06599
CAST IRON STRUCTURE
Axis movement on box guideways
CNC SELCA 3045
Specifications:
-Table dimensions mm 2200x63
-T-slots n.5
-T-slots widht mm...
06599
CAST IRON STRUCTURE
Axis movement on box guideways
CNC SELCA 3045
Specifications:
-Table dimensions mm 2200x63
-T-slots n.5
-T-slots widht mm...
SURFACE GRINDER FAVRETTO 3000
FAVRETTO
07718
CNC SIEMENS SINUMERIK
WORKING CAPACITY
Max grinding length mm 3000
Max grinding width mm 850
Max heigth mm 600
GRINDER SPINDLE
Power HP/Kw...
07718
CNC SIEMENS SINUMERIK
WORKING CAPACITY
Max grinding length mm 3000
Max grinding width mm 850
Max heigth mm 600
GRINDER SPINDLE
Power HP/Kw...
LATHE BIGLIA MOD. B565/YS
BIGLIA
06992
LIVE TOOLS
AXIS C
AXIS Y
SUB-SPINDLE
CNC FANUC 18i-TB
CAPACITY':
-Bar capacity mm 65
-Max machining diameter mm 290
-Max machining lenght mm...
06992
LIVE TOOLS
AXIS C
AXIS Y
SUB-SPINDLE
CNC FANUC 18i-TB
CAPACITY':
-Bar capacity mm 65
-Max machining diameter mm 290
-Max machining lenght mm...
CENTER HAAS MOD. VF-8/50 HE
06667
CNC HAAS
STROKE:
-Axis X mm 1626
-Axis Y mm 1016
-Axis Z mm 762
-Distance between working table and spindle nose mm 127-889
CNC ROTARY...
CNC HAAS
STROKE:
-Axis X mm 1626
-Axis Y mm 1016
-Axis Z mm 762
-Distance between working table and spindle nose mm 127-889
CNC ROTARY...
CENTER QUASER MOD. MK603HP/10
QUASER
07205
CNC FANUC 18iMB
AXIS:
Axis X stroke mm 710
Axis Y stroke mm 610
Axis Z stroke mm 610
Distance between table surface to spindle center mm...
07205
CNC FANUC 18iMB
AXIS:
Axis X stroke mm 710
Axis Y stroke mm 610
Axis Z stroke mm 610
Distance between table surface to spindle center mm...
ERODER WIRE SODICK SL 400Q
SODICK
09329
Max workpiece dimensions (wxdxh):
-mm 600x470x240 (flushing)
-mm 600x470x230 (submerged)
Max workpiece weight:
-500 kg (flushing)
-350 kg...
09329
Max workpiece dimensions (wxdxh):
-mm 600x470x240 (flushing)
-mm 600x470x230 (submerged)
Max workpiece weight:
-500 kg (flushing)
-350 kg...
.JPG)
LATHE CMZ MOD. TC 35M/1350
CMZ
07108
CNC FANUC 32i
LIVE TOLLS
CAPACITY:
-Max rotary diameter on the bed mm 580
-Max diameter on the carriage mm 745
-Max tunring diameter mm...
07108
CNC FANUC 32i
LIVE TOLLS
CAPACITY:
-Max rotary diameter on the bed mm 580
-Max diameter on the carriage mm 745
-Max tunring diameter mm...
PLASMA CUTTING SYSTEM HPM
HPM
06142
MOD. GV 12x3
-Useful cutting size mm 12.000x3.000
-Cutting thickness in working from mm 0,6 to 35
-Max cutting thickness with breakthrough mm...
06142
MOD. GV 12x3
-Useful cutting size mm 12.000x3.000
-Cutting thickness in working from mm 0,6 to 35
-Max cutting thickness with breakthrough mm...
ROTARY TABLE WITH LINEAR AXIS 50 TON
07294
Max weight on center table Ton 50
Table dimensions mm 3600x3600
Longitudinal stroke (axis V) mm 2200
Axis B (rotation) 360 degrees
Increase Axis B...
Max weight on center table Ton 50
Table dimensions mm 3600x3600
Longitudinal stroke (axis V) mm 2200
Axis B (rotation) 360 degrees
Increase Axis B...
CENTER HURON KX 15
HURON
08960
5-AXIS PORTAL
CNC SIEMENES 840D
STROKES:
X axis stroke table 800 mm
Y axis stroke carriage mm 1000
Z axis stroke ram 550 mm
B axis travel (tilting) +...
08960
5-AXIS PORTAL
CNC SIEMENES 840D
STROKES:
X axis stroke table 800 mm
Y axis stroke carriage mm 1000
Z axis stroke ram 550 mm
B axis travel (tilting) +...
EXTERNAL GRINDER LIZZINI SIRIO 15 CNC
LIZZINI
07719
With internal spindle
CNC Siemens sinumerik 840D
WORKING CAPACITY
Max grinding length mm 1500
Height of center mm 200
Load between center Kg...
07719
With internal spindle
CNC Siemens sinumerik 840D
WORKING CAPACITY
Max grinding length mm 1500
Height of center mm 200
Load between center Kg...
MOULDING TEST PRESS
REIS
08154
MOD. TUS 130-100
CNC SIEMENS SIMATIC S5-100U
Press force kN 1000
Ritraction force kN 450
Clamping plate size mm 1300x1600
Installation height mm...
08154
MOD. TUS 130-100
CNC SIEMENS SIMATIC S5-100U
Press force kN 1000
Ritraction force kN 450
Clamping plate size mm 1300x1600
Installation height mm...
CENTER SEIKI TOP MCS 168
SEIKI TOP
09734
GUIDE PIANE
CNC Fanuc 0i-MD
WORKING AREA:
Longitudinal stroke axis X mm 1600
Longitudinal stroke axis Y mm 815
Longitudinal stroke axis Z mm...
09734
GUIDE PIANE
CNC Fanuc 0i-MD
WORKING AREA:
Longitudinal stroke axis X mm 1600
Longitudinal stroke axis Y mm 815
Longitudinal stroke axis Z mm...
CENTER ZPS MOD. MCFV 2080 NT
ZPS
08879
CNC HEIDENHAIN TNC 426 M
TABLE:
Table dimensions mm 2200x780
T-slots number x width mm 5x18
Distance between T-slots cave mm 150
Max load Kg...
08879
CNC HEIDENHAIN TNC 426 M
TABLE:
Table dimensions mm 2200x780
T-slots number x width mm 5x18
Distance between T-slots cave mm 150
Max load Kg...
HORIZONTAL TUBE HONING MACHINE
ROBBI
09015
CNC
Min. bore diameter mm 50
Max bore diameter mm 250
Head stroke max 5400 mm
Honing length max mm 4000
Height of the spindle axis to the ground mm...
09015
CNC
Min. bore diameter mm 50
Max bore diameter mm 250
Head stroke max 5400 mm
Honing length max mm 4000
Height of the spindle axis to the ground mm...
LATHE GOODWAY GS 400 L
GOODWAY
07490
CNC FANUC 0i-TC
CAPACITY
Swing over bed mm 740
Swing over saddle mm 710
Max machining dia. mm 610
Max work length mm 1990
Draw tube dia. mm...
07490
CNC FANUC 0i-TC
CAPACITY
Swing over bed mm 740
Swing over saddle mm 710
Max machining dia. mm 610
Max work length mm 1990
Draw tube dia. mm...
LATHE GOODWAY MOD. GS2800M
GOODWAY
09744
AXIS C
LIVE TOOLS
CNC FANUC 18i-TB
Max swing diameter 630 mm
Max turning diameter 440 mm
Max turning length 731 mm
Bar passaging 75 mm
X axis travel...
09744
AXIS C
LIVE TOOLS
CNC FANUC 18i-TB
Max swing diameter 630 mm
Max turning diameter 440 mm
Max turning length 731 mm
Bar passaging 75 mm
X axis travel...
LATHE SAFOP LEONARD 3000
SAFOP
07463
Height of center mm 1650
Plateau diameter mm 1300
Turning lenght mm 8000
Overall dimensions mm 13.000x3000
Equipped with:
Plateau diameter mm...
07463
Height of center mm 1650
Plateau diameter mm 1300
Turning lenght mm 8000
Overall dimensions mm 13.000x3000
Equipped with:
Plateau diameter mm...
MILLING NOVAR PARTNER 2200
NOVAR
08083
BED TYPE
Control SELCA 3045
Table size mm 2200x700
Max load Kg 3000
Axis X mm 2000
Axis Y mm 750
Axis Z mm 1300
Spindle speed rpm 3000
EQUIPED...
08083
BED TYPE
Control SELCA 3045
Table size mm 2200x700
Max load Kg 3000
Axis X mm 2000
Axis Y mm 750
Axis Z mm 1300
Spindle speed rpm 3000
EQUIPED...
CENTER MIKRON MOD. HPM 1350
MIKRON
09642
CNC HEIDENHAIN iTNC 530
TABLE:
Table size mm 1425x860
Max workpiece weight Kg 1000
T-slots 10
T-slots widht T 1x18H7, 9x18H12
STROKES:
X axis 1350...
09642
CNC HEIDENHAIN iTNC 530
TABLE:
Table size mm 1425x860
Max workpiece weight Kg 1000
T-slots 10
T-slots widht T 1x18H7, 9x18H12
STROKES:
X axis 1350...
CENTER MORI SEIKI MOD. SH-400
MORI SEIKI
06804
HORIZONTAL
CNC MSC 501
STROKE:
-Axis X mm 560
-Axis Y mm 510
-Axis Z mm 510
-Distance between table surface and spindle center mm...
06804
HORIZONTAL
CNC MSC 501
STROKE:
-Axis X mm 560
-Axis Y mm 510
-Axis Z mm 510
-Distance between table surface and spindle center mm...
CENTER WELE AA1565
WELE
08841
CNC FANUC 31iMB + volantino remotato
TABLE:
Table size mm 1650x650
Table load Kg 1500
STROKES:
Axis X stroke mm 1500
Axis Y stroke mm 650
Axis Z...
08841
CNC FANUC 31iMB + volantino remotato
TABLE:
Table size mm 1650x650
Table load Kg 1500
STROKES:
Axis X stroke mm 1500
Axis Y stroke mm 650
Axis Z...
EXTERNAL GRINDING LIZZINI MITO 6 CNC
LIZZINI
07345
GENERAL:
-Height of centre over table mm 150
-Max grinding lenght mm 600
-Max load between centre Kg 120
ASSE LONGITUDINAL "Z" AXIS...
07345
GENERAL:
-Height of centre over table mm 150
-Max grinding lenght mm 600
-Max load between centre Kg 120
ASSE LONGITUDINAL "Z" AXIS...
LATHE CNC IMT MOD. W20T4
IMT
New04369
CNC FANUC OTT C
MAX TURNING DIAM MM.540
MAX DIAM 640X200 MM. FROM SELF-CENTERING BED
AXIS X1-X2 MM.450
AXIS Z1-Z2 MM.450
SPINDLE ENGINE POWER IN A.C....
New04369
CNC FANUC OTT C
MAX TURNING DIAM MM.540
MAX DIAM 640X200 MM. FROM SELF-CENTERING BED
AXIS X1-X2 MM.450
AXIS Z1-Z2 MM.450
SPINDLE ENGINE POWER IN A.C....
LATHE EMCO MAXXTURN 35
EMCO
07913
SPINDLE/SUB-SPINDLE
LIVE TOOLS
AXIS Y
CNC FANUC 18i-TB
AREA DI LAVORO:
Axis strokes X/Y/Z: 260/80(+/- 40)/800 mm
Bar passaging 75 mm
Turning diameter...
07913
SPINDLE/SUB-SPINDLE
LIVE TOOLS
AXIS Y
CNC FANUC 18i-TB
AREA DI LAVORO:
Axis strokes X/Y/Z: 260/80(+/- 40)/800 mm
Bar passaging 75 mm
Turning diameter...
PRESS CINCINNATI MOD. 750H
CINCINNATI
06108
OLEODINAMIC
Lenght mm 6250
Bending capacity mild steel mm 25x4350
Full tonnage ton 750
Tonange in fast press ton 300
Stroke mm 300
Open-Closed height...
06108
OLEODINAMIC
Lenght mm 6250
Bending capacity mild steel mm 25x4350
Full tonnage ton 750
Tonange in fast press ton 300
Stroke mm 300
Open-Closed height...
ROTARY-MOVING TABLE COLGAR
COLGAR
06099
MOD. TRT120
Table size mm 1800x2000
Longitudinal table stroke (axis V) mm 1500
Table rotataion (axis B) continuous
Table positioning 0,001 degrees
B...
06099
MOD. TRT120
Table size mm 1800x2000
Longitudinal table stroke (axis V) mm 1500
Table rotataion (axis B) continuous
Table positioning 0,001 degrees
B...
CENTER DOOSAN MOD. VM 6500
DOOSAN
09161
BOX GUIDEWAY
CNC HEIDENHAIN TNC 530
CAPACITY':
Distance spindle center - column mm 722
Distance spindle nose - table surface 150-775...
09161
BOX GUIDEWAY
CNC HEIDENHAIN TNC 530
CAPACITY':
Distance spindle center - column mm 722
Distance spindle nose - table surface 150-775...
CENTER HAAS MOD. VM-6
HAAS
08765
CNC HAAS
STROKES:
Axis X stroke mm 1626
Axis Y stroke mm 813
Axis Z stroke mm 762
Distance between spindle nose to table plane mm...
08765
CNC HAAS
STROKES:
Axis X stroke mm 1626
Axis Y stroke mm 813
Axis Z stroke mm 762
Distance between spindle nose to table plane mm...
GRINDING REISHAUER TYPE AZA
REISHAUER
09287
FOR GEARS
Min wheel diameter 10 mm
Max wheel diameter 300 mm
Max slide stroke 180 mm
Min/max clamping length 145/420 mm
Piece weight kp 60
Min/max...
09287
FOR GEARS
Min wheel diameter 10 mm
Max wheel diameter 300 mm
Max slide stroke 180 mm
Min/max clamping length 145/420 mm
Piece weight kp 60
Min/max...
LATHE CNC DAEWOO PUMA 450A
DAEWOO
08537
CNC FANUC 18-T
CAPACITY:
Max swing diameter over the bed mm 900
Max swing diameter over the carriage mm 630
Max turning diameter mm 700
Max turning...
08537
CNC FANUC 18-T
CAPACITY:
Max swing diameter over the bed mm 900
Max swing diameter over the carriage mm 630
Max turning diameter mm 700
Max turning...
LATHE CNC DOOSAN PUMA 2500 Y
DOOSAN
09613
TAILSTOCK
LIVE TOOLS
Y-AXIS
CNC FANUC 18iTB
CAPACITY:
Max diameter on the bed mm 600
Max diameter on the carriage mm 550
Max turning diameter mm...
09613
TAILSTOCK
LIVE TOOLS
Y-AXIS
CNC FANUC 18iTB
CAPACITY:
Max diameter on the bed mm 600
Max diameter on the carriage mm 550
Max turning diameter mm...
LATHE MENTI MOD. 430/1200
MENTI
09079
LIVE TOOLS
CNC SIMENES 810D
CAPACITY:
Max turning lenght mm 2000
Max swing diameter mm 1250
Max turning diameter in gap mm 1200
Max turning diameter...
09079
LIVE TOOLS
CNC SIMENES 810D
CAPACITY:
Max turning lenght mm 2000
Max swing diameter mm 1250
Max turning diameter in gap mm 1200
Max turning diameter...
LATHE SPINNER TC600-65-SMCY
SPINNER
06020
CNC Fanuc 31i-TA
Counter-spindle
Axis Y
Motorized tools
Axis C on both spindles
CAPACITY:
Max turning bar diameter mm 65
Max turning shot diameter...
06020
CNC Fanuc 31i-TA
Counter-spindle
Axis Y
Motorized tools
Axis C on both spindles
CAPACITY:
Max turning bar diameter mm 65
Max turning shot diameter...
PLASMA CUTTING PROMOTEC
07987
MOD. ECTOR 2560
Working area 2500 x 6000 mm
EQUIPPED WITH:
-Generator HPR 260
-Fume exhaust filter
USED MACHINE
MOD. ECTOR 2560
Working area 2500 x 6000 mm
EQUIPPED WITH:
-Generator HPR 260
-Fume exhaust filter
USED MACHINE
PRESS BRAKE CBC
CBC
06847
MOD. HS 200/51
CNC ESA GV type KVARA G/COL 46
Tonnage Ton 200
Bed lenght 5100 mm
Distance between housing 4100 mm
Distance between bed and upper...
06847
MOD. HS 200/51
CNC ESA GV type KVARA G/COL 46
Tonnage Ton 200
Bed lenght 5100 mm
Distance between housing 4100 mm
Distance between bed and upper...
.JPG)
SAW BAND GERNETTI SHN 42/A
GERNETTI
08630
AUTOMATIC
CUTTING CAPACITY:
-Round 420 mm
-Square 420x420 mm
-Bundle 380x320 mm
Blade dimensions 6400x41x1,3 mm
Blade motor power 5,5 kW
Cutting...
08630
AUTOMATIC
CUTTING CAPACITY:
-Round 420 mm
-Square 420x420 mm
-Bundle 380x320 mm
Blade dimensions 6400x41x1,3 mm
Blade motor power 5,5 kW
Cutting...
BORING MACHINE PONTIGGIA NH450
PONTIGGIA
09014
Working cylinder diameter from 80 mm to 400 mm
Max working cylinder length 7000 mm
Removal capacity 7/8 mm
Spindle diameter 400 mm with 3...
09014
Working cylinder diameter from 80 mm to 400 mm
Max working cylinder length 7000 mm
Removal capacity 7/8 mm
Spindle diameter 400 mm with 3...
CENTER DECKEL MAHO MOD. DMC 50 H
DECKEL MAHO
06753
CNC SIEMENS 840D
STROKES:
Axis X mm 560
Axis Y mm 560
Axis Z mm 510
PALLET:
N.02 pallet
Surface mm 400x400
Indexing table 1 degree
FEEDRATE:
Max...
06753
CNC SIEMENS 840D
STROKES:
Axis X mm 560
Axis Y mm 560
Axis Z mm 510
PALLET:
N.02 pallet
Surface mm 400x400
Indexing table 1 degree
FEEDRATE:
Max...
CENTER DECKEL MAHO MOD. DMC 50 H
DECKEL MAHO
06754
CNC SIEMENS 840D
STROKES:
Axis X mm 560
Axis Y mm 560
Axis Z mm 510
PALLET:
N.02 pallet
Surface mm 400x400
Indexing table 1 degree
FEEDRATE:
Max...
06754
CNC SIEMENS 840D
STROKES:
Axis X mm 560
Axis Y mm 560
Axis Z mm 510
PALLET:
N.02 pallet
Surface mm 400x400
Indexing table 1 degree
FEEDRATE:
Max...
.JPG)
CENTER MIKRON UCP 600
MIKRON
06547
5 AXIS
CNC HEIDENHAIN TNC 430 M
Axis X mm 530
Axis Y mm 450
Axis Z mm 450
Spindle speed 12000 rpm
Spindle power kW 12 (100%) /16 kW (40%)
Spindle...
06547
5 AXIS
CNC HEIDENHAIN TNC 430 M
Axis X mm 530
Axis Y mm 450
Axis Z mm 450
Spindle speed 12000 rpm
Spindle power kW 12 (100%) /16 kW (40%)
Spindle...
CENTER AWEA BM-1200
AWEA
08245
CNC HEIDENHAIN TNC-530
STROKES:
Axis X stroke mm 1200
Axis Y stroke mm 600
Axis Z stroke mm 600
Distance from spindle nose to table mm...
08245
CNC HEIDENHAIN TNC-530
STROKES:
Axis X stroke mm 1200
Axis Y stroke mm 600
Axis Z stroke mm 600
Distance from spindle nose to table mm...
LATHE BIGLIA MOD. B565/M
BIGLIA
07013
LIVE TOOLS
AXIS C
CNC FANUC 18i-TB
CAPACITY:
-Bar diameter mm 65
-Max turning diameter 290
-Max turning lenght mm 560
-Max swing diameter mm...
07013
LIVE TOOLS
AXIS C
CNC FANUC 18i-TB
CAPACITY:
-Bar diameter mm 65
-Max turning diameter 290
-Max turning lenght mm 560
-Max swing diameter mm...
LATHE DAEWOO PUMA 400 MB
DAEWOO
07491
C AXIS
LIVE TOOLS
CNC FANUC 21i-TB
CAPACITY
Swing over bed mm 770
Swing over saddle mm 590
Max machining dia. mm 560
Max work length mm 978
Draw...
07491
C AXIS
LIVE TOOLS
CNC FANUC 21i-TB
CAPACITY
Swing over bed mm 770
Swing over saddle mm 590
Max machining dia. mm 560
Max work length mm 978
Draw...
LATHE DOOSAN PUMA 400B
DOOSAN
07809
CNC FANUC 21i-TB
CAPACITY
Swing over bed mm 700
Swing over saddle mm 590
Max machining dia. mm 550
Max work length mm 1043
Draw tube dia. mm...
07809
CNC FANUC 21i-TB
CAPACITY
Swing over bed mm 700
Swing over saddle mm 590
Max machining dia. mm 550
Max work length mm 1043
Draw tube dia. mm...
MILLING MOMAC MOD. BF 20
MOMAC
07520
CNC Tnc 426
TABLE:
Table dimensions mm 2200x1000
Max load Kg 6000
STROKES:
Longitudinal axis X mm 2000
Cross axis Y mm 1000
Vertical axis Z mm...
07520
CNC Tnc 426
TABLE:
Table dimensions mm 2200x1000
Max load Kg 6000
STROKES:
Longitudinal axis X mm 2000
Cross axis Y mm 1000
Vertical axis Z mm...
VERTICAL MACHINE CENTER AWEA BM-1300
AWEA
08042
CNC Selca S4040DH
TABLE
Working surface mm 1500x800
Max load Kg 1200
TRAVELS
Axis X mm 1300
Axis Y mm 800
Axis Z mm 700
Distance spindle nose/table...
08042
CNC Selca S4040DH
TABLE
Working surface mm 1500x800
Max load Kg 1200
TRAVELS
Axis X mm 1300
Axis Y mm 800
Axis Z mm 700
Distance spindle nose/table...
LATHE CITIZEN CINCOM C32-VIII
CITIZEN
07191
SLIDING HEAD
CNC MITSUBISHI MELDAS 635
Maximum machining center mm 32
Spindle through-hole diameter mm 36
Maximum machining lenght (per chuck) mm...
07191
SLIDING HEAD
CNC MITSUBISHI MELDAS 635
Maximum machining center mm 32
Spindle through-hole diameter mm 36
Maximum machining lenght (per chuck) mm...
.JPG)
LATHE TSUGAMI - MORI BS26 III
TSUGAMI - MORI
07471
SLIDING HEADSTOCK
N.5 AXIS + 2 C AXIS
SUB-SPINLE
LIVES TOOLS
CNC MSC-501
Bar diameter mm 8-26
Max turning lenght mm 210
Max drill diameter mm 12
Max...
07471
SLIDING HEADSTOCK
N.5 AXIS + 2 C AXIS
SUB-SPINLE
LIVES TOOLS
CNC MSC-501
Bar diameter mm 8-26
Max turning lenght mm 210
Max drill diameter mm 12
Max...
CENTER HURON VX12
HURON
09623
CNC HEIDENHAIN TNC 620
TABLE:
Table dimensions mm 1400x630
T-slots mm 5x18x125
Max table load Kg 1200
CAPACITY:
Axis X stroke mm 1220
Axis Y stroke...
09623
CNC HEIDENHAIN TNC 620
TABLE:
Table dimensions mm 1400x630
T-slots mm 5x18x125
Max table load Kg 1200
CAPACITY:
Axis X stroke mm 1220
Axis Y stroke...
GRINDING DELTA MOD. MINI 12
DELTA
07690
DIASTEP
WORKING CAPACITY:
-Max grinding lenght 1300 mm
-Max grinding width with band wheel 50, 600 mm
-Max grinding width with band wheel 100, 650...
07690
DIASTEP
WORKING CAPACITY:
-Max grinding lenght 1300 mm
-Max grinding width with band wheel 50, 600 mm
-Max grinding width with band wheel 100, 650...
CENTER AERRE CL80150
AERRE
09663
MOD. CL 80150K ZA
CNC SELCA S4040D
WORK PLAN:
Dimensions 1700x800 mm
Worktop height from ground 1030 mm
Max piece weight on the work surface 2000...
09663
MOD. CL 80150K ZA
CNC SELCA S4040D
WORK PLAN:
Dimensions 1700x800 mm
Worktop height from ground 1030 mm
Max piece weight on the work surface 2000...
.jpeg)
CENTER AWEA AF-1000
AWEA
09331
WITH ROTARY TABLE
CNC FANUC Oi-MF
STROKES:
Axis X stroke mm 1020
Axis Y stroke mm 550
Axis Z stroke mm 634
Distance from spindle center to column mm...
09331
WITH ROTARY TABLE
CNC FANUC Oi-MF
STROKES:
Axis X stroke mm 1020
Axis Y stroke mm 550
Axis Z stroke mm 634
Distance from spindle center to column mm...
CENTER DAEWOO MOD. ACE HC 400
DAEWOO
07233
CNC Fanuc 21i-MA
Axis X stroke 600 mm
Axis Y stroke 560 mm
Axis Z stroke 565 mm
Distance between spindle center - pallet surface mm 50-610
Distance...
07233
CNC Fanuc 21i-MA
Axis X stroke 600 mm
Axis Y stroke 560 mm
Axis Z stroke 565 mm
Distance between spindle center - pallet surface mm 50-610
Distance...
CENTER MAZAK MDO. NEXUS 510C
MAZAK
08951
CNC MAZATROL 640M NEXUS
Table dimensions mm 1300x550
Max table load Kg 1200
Axis X stroke mm 1050
Axis Y stroke mm 510
Axis Z stroke mm 510
Spindle...
08951
CNC MAZATROL 640M NEXUS
Table dimensions mm 1300x550
Max table load Kg 1200
Axis X stroke mm 1050
Axis Y stroke mm 510
Axis Z stroke mm 510
Spindle...
CENTER ZPS MOD. MCFV 1680 STANDARD
ZPS
08878
CNC HEIDENHAIN iTNC 530
TABLE:
Table dimensions mm 1800x780
T-slots number 5
T-slots distance mm 160
Max load Kg 2500
WORKING ARES:
Axis X stroke mm...
08878
CNC HEIDENHAIN iTNC 530
TABLE:
Table dimensions mm 1800x780
T-slots number 5
T-slots distance mm 160
Max load Kg 2500
WORKING ARES:
Axis X stroke mm...
CNC LATHE TONGTAI TOPPER TGL15C
TOPPER
New05388
2 AXIS
CNC FANUC Oi-TC
WORKING CAPACITY:
Max swing diameter mm.300
Max turning diameter mm.180
Max workpiece weight Kg.6
Axis X mm.170+490
Axis Z...
New05388
2 AXIS
CNC FANUC Oi-TC
WORKING CAPACITY:
Max swing diameter mm.300
Max turning diameter mm.180
Max workpiece weight Kg.6
Axis X mm.170+490
Axis Z...
LASER TRUMPF TRUMATIC L3030
TRUMPF
08733
Laser power 3000 W
CONTROL SYSTEM:
Bosch CC220 S TRUMAGRAPH
WORKING AREA:
X mm 3000
Y mm 1500
Z mm 115
CAMPO DI SUPERAMENTO:
In direzione X -16 -...
08733
Laser power 3000 W
CONTROL SYSTEM:
Bosch CC220 S TRUMAGRAPH
WORKING AREA:
X mm 3000
Y mm 1500
Z mm 115
CAMPO DI SUPERAMENTO:
In direzione X -16 -...
LATHE CNC DAEWOO PUMA 300 MS
PUMA
08063
CNC Fanuc 18-T
CAPACITY
Max swing over bed mm 590
Max swing over carriage mm 450
Max turning diameter mm 355
Max turning lenght 583
Max turning bar...
08063
CNC Fanuc 18-T
CAPACITY
Max swing over bed mm 590
Max swing over carriage mm 450
Max turning diameter mm 355
Max turning lenght 583
Max turning bar...
LATHE DOOSAN PUMA 2000Y
DOOSAN
08243
SPINDLE
LIVE TOOLS
Y AXIS
C AXIS 0,001 degrees
CNC FANUC 18i-TB
Travel X axis mm 250
Travel Y axis mm +/- 50
Travel Z axis mm 580
Max turning...
08243
SPINDLE
LIVE TOOLS
Y AXIS
C AXIS 0,001 degrees
CNC FANUC 18i-TB
Travel X axis mm 250
Travel Y axis mm +/- 50
Travel Z axis mm 580
Max turning...
LATHE MORANDO
MORANDO
06428
CNC ECS 1400
Distance between centre 3000 mm
Height of center 500 mm
Max diameter on bed 1000 mm
Max diameter on carriage 560 mm
Bar passaging diam....
06428
CNC ECS 1400
Distance between centre 3000 mm
Height of center 500 mm
Max diameter on bed 1000 mm
Max diameter on carriage 560 mm
Bar passaging diam....
LATHE OKUMA MOD. SPACE TURN
07461
LB 3000 EX (M) Cx500
LIVE TOOLS
CNC OKUMA OSP-P200L
CAPACITY:
Max swing diameter over bed mm 580
Max swing diameter over carriage mm 470
Distance...
LB 3000 EX (M) Cx500
LIVE TOOLS
CNC OKUMA OSP-P200L
CAPACITY:
Max swing diameter over bed mm 580
Max swing diameter over carriage mm 470
Distance...
PLASMA CUTTING WARCOM
WARCOM
07260
MOD. W POWER 40-20
Working area mm 4000x2000
Maximum load kg/m2 480
Motor power Kw 20
Max cutting width steel mm 3-38
Max cutting width inox steel...
07260
MOD. W POWER 40-20
Working area mm 4000x2000
Maximum load kg/m2 480
Motor power Kw 20
Max cutting width steel mm 3-38
Max cutting width inox steel...
VERTICAL LATHE CNC OMBA MOD. TCV 90
OMBA
07003
CNC ECS 4802 (RECONDITIONED YEAR 2006)
DIAMETER HYDRAULIC SPINDLE MM 900
TURNING DIAMETER MM 1100
MAX HEIGHT UNDER CROSSRAIL MM 1150
FEED MOTOR...
07003
CNC ECS 4802 (RECONDITIONED YEAR 2006)
DIAMETER HYDRAULIC SPINDLE MM 900
TURNING DIAMETER MM 1100
MAX HEIGHT UNDER CROSSRAIL MM 1150
FEED MOTOR...
VERTICAL MACHINING CENTRE MAZAK MOD. NEXUS 510C
MAZAK
09175
Control MAZATROL 640M NEXUS
TABLE:
Lenght mm 1300
Width mm 550
Max load Kg 1200
AXIS:
Axis X mm 1050
Axis Y mm 510
Axis Z mm 510
Distance spindle...
09175
Control MAZATROL 640M NEXUS
TABLE:
Lenght mm 1300
Width mm 550
Max load Kg 1200
AXIS:
Axis X mm 1050
Axis Y mm 510
Axis Z mm 510
Distance spindle...
.JPG)
LATHE CNC DAEWOO PUMA 500
DAEWOO
08536
CNC FANUC 18i-T
CAPACITY:
Max swing diameter on the bed mm 900
Max swing diameter on the carriage mm 630
Max turning diameter mm 700
Max turning...
08536
CNC FANUC 18i-T
CAPACITY:
Max swing diameter on the bed mm 900
Max swing diameter on the carriage mm 630
Max turning diameter mm 700
Max turning...
LATHE COMEV MOD. SPEED 26x2000
COMEV
07691
CNC D.ELECTRON
-HEIGHT OF CENTRE OVER BED MM 260
-DISTANCE BETWEEN CENTRE MM 2000
-SWING OVER BED MM 520
-SWING OVER SLIDE MM 265
-TURNING LENGHT MM...
07691
CNC D.ELECTRON
-HEIGHT OF CENTRE OVER BED MM 260
-DISTANCE BETWEEN CENTRE MM 2000
-SWING OVER BED MM 520
-SWING OVER SLIDE MM 265
-TURNING LENGHT MM...
LATHE DAEWOO PUMA 450 B
DAEWOO
07827
CNC FANUC 18-T
CAPACITY
Swing over bed mm 900
Swing over saddle mm 630
Max machining dia. mm 700
Max work length mm 1575
Draw tube dia. mm...
07827
CNC FANUC 18-T
CAPACITY
Swing over bed mm 900
Swing over saddle mm 630
Max machining dia. mm 700
Max work length mm 1575
Draw tube dia. mm...
GRINDING KENT KGS-N84 WMA2
KENT
09788
WORKING AREA:
Workin plane 800x400 mm
Longitudinal stroke 920 mm
Crossl stroke 450 mm
Distance spindle center-table 600 mm
Max load capacity on the...
09788
WORKING AREA:
Workin plane 800x400 mm
Longitudinal stroke 920 mm
Crossl stroke 450 mm
Distance spindle center-table 600 mm
Max load capacity on the...
LATHE CNC CMT MOD. ARES 208
CMT
New04206
CNC SINUMERIK
HEIGHT OF CENTRE FROM TABLE MM.350
MAX DIAMETER MM.695
MAX DIAMETER OVER CARRIAGE MM.460
DISTANCE BETWEEN CENTRES MM.2000
TOT POWER KW...
New04206
CNC SINUMERIK
HEIGHT OF CENTRE FROM TABLE MM.350
MAX DIAMETER MM.695
MAX DIAMETER OVER CARRIAGE MM.460
DISTANCE BETWEEN CENTRES MM.2000
TOT POWER KW...
LATHE MORANDO 600x3200
MORANDO
TRN.PAG.O573
MOD. SM.6O
MOTOR CC MAX POWER KW 35
PLATEAU 4 JAW DIAM.MM.1000
GUIDES WIDTH MM.1000
Height of center mm.600
Max diameter swing over bed...
TRN.PAG.O573
MOD. SM.6O
MOTOR CC MAX POWER KW 35
PLATEAU 4 JAW DIAM.MM.1000
GUIDES WIDTH MM.1000
Height of center mm.600
Max diameter swing over bed...
LATHE SCHIESS
SCHIESS
08081
CNC ECS 1400
Max turning diameter mm 1000
Spidle diameter 3 jaws mm 800
Spindle speed n.8 11,2-355 Rpm
Main motor power 30 Hp
Turret 5 position...
08081
CNC ECS 1400
Max turning diameter mm 1000
Spidle diameter 3 jaws mm 800
Spindle speed n.8 11,2-355 Rpm
Main motor power 30 Hp
Turret 5 position...
LATHE UTITA T450x4000
UTITA
07397
CNC ECS 2302
Max turning diameter on the carriage mm 450
Max turning lenght mm 4000
Distance between center mm 4400
Bar passaging mm 80
Spindle taper...
07397
CNC ECS 2302
Max turning diameter on the carriage mm 450
Max turning lenght mm 4000
Distance between center mm 4400
Bar passaging mm 80
Spindle taper...
PORTAL MILLING JOBS-MULTINORMA
JOBS
New04594
MOD. 25-70
CNC NUM 750F
AXIS X: mm 7000
AXIS Y: mm 2300
AXIS Z: mm 500
Min-max distance spindle-table 900-1400
Distance between column mm 2500
Table...
New04594
MOD. 25-70
CNC NUM 750F
AXIS X: mm 7000
AXIS Y: mm 2300
AXIS Z: mm 500
Min-max distance spindle-table 900-1400
Distance between column mm 2500
Table...
.JPG)
ROTARY MOVING TABLE 3500X3500
VERTICAL LATHE SEDIN 1516
SEDIN
08052
Read-out 4 axis
Max workpiece diameter mm 1600
Max workpiece height mm 1000
Max workpiece weight Kg 10000
Vertical RAM stroke mm 700
Vertical...
08052
Read-out 4 axis
Max workpiece diameter mm 1600
Max workpiece height mm 1000
Max workpiece weight Kg 10000
Vertical RAM stroke mm 700
Vertical...
BENDING ROLL TAURING
TAURING
08331
MOD. ALPHA 200 PQI
3 ROLLS
EQUIPPED WITH:
Control panel with wheel
Remote handwheel
USED MACHINE
08331
MOD. ALPHA 200 PQI
3 ROLLS
EQUIPPED WITH:
Control panel with wheel
Remote handwheel
USED MACHINE
LATHE DOOSAN MOD. LYNX 300M
DOOSAN
07016
LIVE TOOLS
CNC FANUC serie i
CAPACITY:
-Swing diameter over the bed mm 651
-Swing diameter over the carriage mm 461
-Max turning diameter mm 370
-Max...
07016
LIVE TOOLS
CNC FANUC serie i
CAPACITY:
-Swing diameter over the bed mm 651
-Swing diameter over the carriage mm 461
-Max turning diameter mm 370
-Max...
VERTICAL MACHINE CENTER AWEA
AWEA
08036
BM 1020
CNC Selca S4040DH
TABLE
Working surface mm 1120x600
Max load Kg 1.000
TRAVELS
Axis X mm 1020
Axis Y mm 600
Axis Z mm 600
Distance spindle...
08036
BM 1020
CNC Selca S4040DH
TABLE
Working surface mm 1120x600
Max load Kg 1.000
TRAVELS
Axis X mm 1020
Axis Y mm 600
Axis Z mm 600
Distance spindle...
.jpg)
VERTICAL MACHINING CENTRE FEELER MOD. FV-1300A
FEELER
08149
CNC FANUC OiMB
MACHINE DETAILS:
- Table size mm 600x1420
- T-slots mm 18x5x100
- Table load capacity kg. 1.000
- Longitudinal X axis mm 1300
- Cross...
08149
CNC FANUC OiMB
MACHINE DETAILS:
- Table size mm 600x1420
- T-slots mm 18x5x100
- Table load capacity kg. 1.000
- Longitudinal X axis mm 1300
- Cross...
CENTER EUMACH MOD. SUMO 1015
EUMACH
07005
CNC HEIDENHAIN 430
TECHNICAL DATA:
-Table dimensions mm 1270x600
-T-slots (n.xdimensions) 5x18
-Table load Kg 1000
-Axis X stroke mm 1015
-Axis Y...
07005
CNC HEIDENHAIN 430
TECHNICAL DATA:
-Table dimensions mm 1270x600
-T-slots (n.xdimensions) 5x18
-Table load Kg 1000
-Axis X stroke mm 1015
-Axis Y...
LATHE CNC TRENS MOD. SBL500/750
TRENS
New04627
CNC SIEMENS 810 D SHOPTURN
Swing diameter mm 630
Max turning diameter mm 405
Max turning lenght mm 750
Inclination bed 45°
Axis X mm 270
Axis Z mm...
New04627
CNC SIEMENS 810 D SHOPTURN
Swing diameter mm 630
Max turning diameter mm 405
Max turning lenght mm 750
Inclination bed 45°
Axis X mm 270
Axis Z mm...
PRESS BRAKE CMU 3ES
CMU
NEW05609
MOD.160/30
HYDRAULIC
SINCHRONIZED
-BED LENGHT MM.3100
-DISTANCE BETWEEN HOUSING MM.2750
-TONNAGE T. 160
-THROAT DEPTH MM.500
-RAM STROKE...
NEW05609
MOD.160/30
HYDRAULIC
SINCHRONIZED
-BED LENGHT MM.3100
-DISTANCE BETWEEN HOUSING MM.2750
-TONNAGE T. 160
-THROAT DEPTH MM.500
-RAM STROKE...
SAW FRIGGI 2MF 1000 F
FRIGGI
08741
CNC FRIGGI T-LINE
Round cutting capacity mm 1040
Rectangle cutting capacity mm 1040x1100
Flywheels diameter mm 1200
Max opening vises mm 1160
Min...
08741
CNC FRIGGI T-LINE
Round cutting capacity mm 1040
Rectangle cutting capacity mm 1040x1100
Flywheels diameter mm 1200
Max opening vises mm 1160
Min...
CENTER HAAS VF6/50HE
HAAS
06831
CNC HAAS
Axis X mm 1626
Axis Y mm 813
Axis Z mm 762
Table dimensions mm 1626x711
Spindle taper n.50
Spindle spees rpm 7500
Spindle motor power kW...
06831
CNC HAAS
Axis X mm 1626
Axis Y mm 813
Axis Z mm 762
Table dimensions mm 1626x711
Spindle taper n.50
Spindle spees rpm 7500
Spindle motor power kW...
CENTER OKUMA MA-40HA
OKUMA
06985
CNC OSP U-100M
STROKES:
-Axis X mm 560
-Axis Y mm 610
-Axis Z mm 560
-Distance between table surface and spindle center mm 50-600
TABLE:
-N. 02...
06985
CNC OSP U-100M
STROKES:
-Axis X mm 560
-Axis Y mm 610
-Axis Z mm 560
-Distance between table surface and spindle center mm 50-600
TABLE:
-N. 02...
LATHE DOOSAN MOD. PUMA 240MB
DOOSAN
07031
CNC FANUC serie Oi-TC
CAPACITY:
-Max swing diameter on the bed mm 550
-Max swing diameter on the carriage mm 390
-Max turning diameter on the bed mm...
07031
CNC FANUC serie Oi-TC
CAPACITY:
-Max swing diameter on the bed mm 550
-Max swing diameter on the carriage mm 390
-Max turning diameter on the bed mm...
SAW DANOBT MOD. CP650A
DANOBAT
09033
CNC DANOBAT
Round cutting capacity diam. 660 mm
Rectangular cutting capacity mm 660x660
Work table height 800 mm
Flywheels diameter 760 mm
Blade...
09033
CNC DANOBAT
Round cutting capacity diam. 660 mm
Rectangular cutting capacity mm 660x660
Work table height 800 mm
Flywheels diameter 760 mm
Blade...
CENTER EUMACH MOD. SUMO 1100
EUMACH
07733
CNC SELCA S4045PD
Axis X stroke mm 1100
Axis Y stroke mm 610
Axis Z stroke mm 610
Spindle nose ISO 40
Spindle speed rpm 10.000
Spindle motor power 15...
07733
CNC SELCA S4045PD
Axis X stroke mm 1100
Axis Y stroke mm 610
Axis Z stroke mm 610
Spindle nose ISO 40
Spindle speed rpm 10.000
Spindle motor power 15...
.jpeg)
GRINDING DELTA SYNTHESIS 1100/600
DELTA
08250
CN COMPACT PLUS
Table dimensions mm 1300x500
Max table load Kg 1000
T-slots dimensions mm 4-125
Magnetic yable mm 1000x500
Longitudinal stroke mm...
08250
CN COMPACT PLUS
Table dimensions mm 1300x500
Max table load Kg 1000
T-slots dimensions mm 4-125
Magnetic yable mm 1000x500
Longitudinal stroke mm...
LATHE CMZ MOD. TL 25BM
CMZ
07109
CNC FANUC 32i
LIVE TOOLS
CAPACITY:
-Max rotary dimaeter on the bed mm 685
-Max diameter on the carriage mm 510
-Max turning diameter mm 400
-Distance...
07109
CNC FANUC 32i
LIVE TOOLS
CAPACITY:
-Max rotary dimaeter on the bed mm 685
-Max diameter on the carriage mm 510
-Max turning diameter mm 400
-Distance...
LATHE DAEWOO PUMA 300 LM
DAEWOO
07492
C AXIS
LIVE TOOLS
CNC FANUC 18-T
CAPACITY
Swing over bed mm 590
Swing over saddle mm 450
Max machining dia. mm 355
Max work length mm 1233
Draw...
07492
C AXIS
LIVE TOOLS
CNC FANUC 18-T
CAPACITY
Swing over bed mm 590
Swing over saddle mm 450
Max machining dia. mm 355
Max work length mm 1233
Draw...
LATHE FEELER CNC MOD. FTC 20L
FEELER
New02335
CNC FANUC OiTC
Max swing diameter mm.560
Turning diameter mm.350
Max turning lenght mm.613
Slant of bed 45.
Axis X mm.190
Axis Z mm.650
Servo...
New02335
CNC FANUC OiTC
Max swing diameter mm.560
Turning diameter mm.350
Max turning lenght mm.613
Slant of bed 45.
Axis X mm.190
Axis Z mm.650
Servo...
EXTERNAL GRINDER TOS BUT 63/3000
TOS
09298
Length 3000 mm
Grinding diameter mm 630
Center height 315 mm
Max wheel diameter mm 750
Total installed power kVa 41
Piece load ton 2,5
Machine...
09298
Length 3000 mm
Grinding diameter mm 630
Center height 315 mm
Max wheel diameter mm 750
Total installed power kVa 41
Piece load ton 2,5
Machine...
LATHE GIANA 720x4000 CNC
GIANA
07388
LIVE TURRET AND C-AXIS
CNC ECS 2302
CAPACITY':
Height center mm 430
Distance between centers mm 4000
Swing diameter on the bed mm 720
Swing...
07388
LIVE TURRET AND C-AXIS
CNC ECS 2302
CAPACITY':
Height center mm 430
Distance between centers mm 4000
Swing diameter on the bed mm 720
Swing...
.JPG)
LATHE MORI SEIKI DL 151 MC
MORI SEIKI
07473
CNC MSC 501
Turning diameter mm 150
Allowed diameter rotation mm 420
Max turning length mm 200
Main-sub spindle bore mm. 48
Main-sub spindle bar...
07473
CNC MSC 501
Turning diameter mm 150
Allowed diameter rotation mm 420
Max turning length mm 200
Main-sub spindle bore mm. 48
Main-sub spindle bar...
LATHE PADOVANI LABOR 450 CNC
PADOVANI
07420
CAPACITA':
Number 2 controlled axis
Swing diameter on the bed mm 1050
Max turning diameter on the bed 900 mm
Max turning diameter on the carriage...
07420
CAPACITA':
Number 2 controlled axis
Swing diameter on the bed mm 1050
Max turning diameter on the bed 900 mm
Max turning diameter on the carriage...
PRESS BRAKE WARCOM FUTURA 60/100
WARCOM
New04900
NEW CNC DELEM 69T
MM 6500x100 TON.
CNC ESA SERIE TRIA 7500V
GAP MM 750
MOTOR POWER HP 15
VOLT 380 - HZ 50
APPROX. WEIGHT KG 16000
USED MACHINE
New04900
NEW CNC DELEM 69T
MM 6500x100 TON.
CNC ESA SERIE TRIA 7500V
GAP MM 750
MOTOR POWER HP 15
VOLT 380 - HZ 50
APPROX. WEIGHT KG 16000
USED MACHINE
PRESS ERMAKSAN SPEED-BEND PRO
ERMAKSAN
08746
3100x175 6-AXIS TON
SYNCHRONIZED HYDRAULICS
TECHNICAL FEATURES:
Bending power 175 tons
Bending length 3100 mm
Axes Y1-Y2-X-R-Z1-Z2
Distance between...
08746
3100x175 6-AXIS TON
SYNCHRONIZED HYDRAULICS
TECHNICAL FEATURES:
Bending power 175 tons
Bending length 3100 mm
Axes Y1-Y2-X-R-Z1-Z2
Distance between...
VERTICAL MACHINE CENTER FEELER VMP 50
FEELER
09966
USED VERTICAL MACHINE CENTER
CNC Fanuc 0i-MF
X Axis Travel: 1.300 mm
Y Axis Travel: 610 mm
Z Axis Travel: 600 mm
Spindle Nose to Table Surface:...
09966
USED VERTICAL MACHINE CENTER
CNC Fanuc 0i-MF
X Axis Travel: 1.300 mm
Y Axis Travel: 610 mm
Z Axis Travel: 600 mm
Spindle Nose to Table Surface:...
MILLING RAPID HEAD ARSENAL MOD.FPV 361
New03777
TABLE MM.360x1500
AXIS X MM.1150
AXIS Y MM.360
AXIS Z MM.460
LONGITUDINAL/CROSS FEED MM/MIN 12,5-630
VERTICAL FEED MM/MIN 5,0-262...
TABLE MM.360x1500
AXIS X MM.1150
AXIS Y MM.360
AXIS Z MM.460
LONGITUDINAL/CROSS FEED MM/MIN 12,5-630
VERTICAL FEED MM/MIN 5,0-262...
CENTER SEIKI TOP MOD. MCS 137YL
SEIKI TOP
08419
CNC FANUC Oi-MC
TABLE:
Lenght mm 1450
Widht mm 700
T-slots size mm 18
T-slots number 5
Max table load Kg 1500
STROKES:
Axis X stroke mm 1350
Axis Y...
08419
CNC FANUC Oi-MC
TABLE:
Lenght mm 1450
Widht mm 700
T-slots size mm 18
T-slots number 5
Max table load Kg 1500
STROKES:
Axis X stroke mm 1350
Axis Y...
LATHE TOPPER TONGTAI MOD. TNL-130AL
TONGTAI
08420
CNC FANUC Oi-TC
WORKING CAPACITY:
Max swing diameter mm 620
Max turning diameter mm 410
max turning lenht mm 975
Bar capacity mm 75
STROKE:
Axis X mm...
08420
CNC FANUC Oi-TC
WORKING CAPACITY:
Max swing diameter mm 620
Max turning diameter mm 410
max turning lenht mm 975
Bar capacity mm 75
STROKE:
Axis X mm...
VERTICAL MACHINE CENTER AWEA
AWEA
08040
BM 850
CNC Selca S4040DH
TABLE
Working surface mm 1050x600
Max load Kg 850
TRAVEL
Axis X mm 850
Axis Y mm 600
Axis Z mm 600
Distance spindle...
08040
BM 850
CNC Selca S4040DH
TABLE
Working surface mm 1050x600
Max load Kg 850
TRAVEL
Axis X mm 850
Axis Y mm 600
Axis Z mm 600
Distance spindle...
LATHE CAMPORA BNC 275x1500
CAMPORA BNC
New02159
AUTO- LATHE
- Turning Diam on notch mm.790
- Turning diam over slide mm.310
- Turning diam over bed mm.550
- Max turning lenght mm.1500
- Max...
New02159
AUTO- LATHE
- Turning Diam on notch mm.790
- Turning diam over slide mm.310
- Turning diam over bed mm.550
- Max turning lenght mm.1500
- Max...
CENTER EUMACH MOD. SUMO 1200S
EUMACH
08164
CNC SELCA 4045
Table dimensions mm 1400x630
Max table load Kg 800
T-slots dimensions mm 18/5/125
Axis X stroke mm 1200
Axis Y stroke mm 660
Axis Z...
08164
CNC SELCA 4045
Table dimensions mm 1400x630
Max table load Kg 800
T-slots dimensions mm 18/5/125
Axis X stroke mm 1200
Axis Y stroke mm 660
Axis Z...
CENTER MIKRON VCP 1000 DURO
MIKRON
09641
Heidenhain iTNC 530 CNC
TRAVEL:
X axis 1000 mm
Y axis 650 mm
Z axis 500 mm
TABLE:
Table size: 1300 x 600 mm
Max. Piece weight 1.600 kg
SPINDLE:...
09641
Heidenhain iTNC 530 CNC
TRAVEL:
X axis 1000 mm
Y axis 650 mm
Z axis 500 mm
TABLE:
Table size: 1300 x 600 mm
Max. Piece weight 1.600 kg
SPINDLE:...
.JPG)
CENTERING MACHINE TOVAGLIERI MOD. HYDROCENTR X3
TOVAGLIERI
07423
TRIPLE HEAD: FOR MILLING, FOR CENTERING, FOR BLADE
-Max workpiece length allowed for two simultaneous facing and centerings and with workpiece...
07423
TRIPLE HEAD: FOR MILLING, FOR CENTERING, FOR BLADE
-Max workpiece length allowed for two simultaneous facing and centerings and with workpiece...
HORIZONTAL DRILLING GIANA MOD. TB 1000
GIANA
07381
Height of center mm 510
Diameter on the carriage mm 700
Piece lenght mm 4500
Tool lenght mm 6000
Capacita' foratura dal pieno a distruggere...
07381
Height of center mm 510
Diameter on the carriage mm 700
Piece lenght mm 4500
Tool lenght mm 6000
Capacita' foratura dal pieno a distruggere...
.jpg)
LATHE DOOSAN LYNX 2100LB
DOOSAN
09332
CNC FANUC i PLUS
CAPACITY:
Swing over bed mm 600
Swing over saddle mm 400
Max turning diameter mm 350
Max turning lenght mm 550
Bar working...
09332
CNC FANUC i PLUS
CAPACITY:
Swing over bed mm 600
Swing over saddle mm 400
Max turning diameter mm 350
Max turning lenght mm 550
Bar working...
LATHE FEELER MOD. FTC-50
FEELER
06834
Max swing diameter mm 760
MAx turning diameter mm 640
Max turning lenght mm 808
Bar passaging 117,5 mm
Axis X mm 320+25
Axis Z mm 870
Spindle nose...
06834
Max swing diameter mm 760
MAx turning diameter mm 640
Max turning lenght mm 808
Bar passaging 117,5 mm
Axis X mm 320+25
Axis Z mm 870
Spindle nose...
LATHE SAFOP LEONAR 3000
SAFOP
07314
FOUR GUIDEWAYS
Height of centre mm 1500
Height of centre under head mm 1900
Distance between centre mm 8500
Max working diameter mm 3900
DC...
07314
FOUR GUIDEWAYS
Height of centre mm 1500
Height of centre under head mm 1900
Distance between centre mm 8500
Max working diameter mm 3900
DC...
LATHE SCHIESS
SCHIESS
08432
CNC ECS 1400
Max turning diameter mm 1000
Spidle diameter 3 jaws mm 800
Spindle speed n.8 11,2-355 Rpm
Main motor power 30 Hp
Turret 5 position...
08432
CNC ECS 1400
Max turning diameter mm 1000
Spidle diameter 3 jaws mm 800
Spindle speed n.8 11,2-355 Rpm
Main motor power 30 Hp
Turret 5 position...
MAGNET DIAM. MM 1500
.jpeg)
SAW DANOBAT MOD. CP-650A
DANOBAT
08968
CNC DANOBAT
Round cutting capacity diam. 650 mm
Rectangular cutting capacity mm 650x650
Work table height 800 mm
Flywheels diameter 760 mm
Blade...
08968
CNC DANOBAT
Round cutting capacity diam. 650 mm
Rectangular cutting capacity mm 650x650
Work table height 800 mm
Flywheels diameter 760 mm
Blade...
SURFACE GRINDING CNC FAVRETTO MOD. MC/U 200
FAVRETTO
New05629
WORK CAPACITY
Maximum grinding length mm 1.200
Max width mm 750
Max height mm 650
WHEELHEAD
Grinding head pover kW 15
Wheel dimensions mm 406 x 152.4...
New05629
WORK CAPACITY
Maximum grinding length mm 1.200
Max width mm 750
Max height mm 650
WHEELHEAD
Grinding head pover kW 15
Wheel dimensions mm 406 x 152.4...
VERTICAL MACHINE CENTER MIKRON VCP 600
MIKRON
07961
CNC SELCA S4045 PD (Plus)
Travel:
X mm 600
Y mm 450
Z mm 450
Table dimension mm 850 x 530
Spindle:
Speed 20.000 Rpm
Motor power 12/16 Kw
Spindle...
07961
CNC SELCA S4045 PD (Plus)
Travel:
X mm 600
Y mm 450
Z mm 450
Table dimension mm 850 x 530
Spindle:
Speed 20.000 Rpm
Motor power 12/16 Kw
Spindle...
WIRE EROSION ONA MOD. AX4
ONA
07910
CNC ONA
Axis X 600 mm
Axis Y 400 mm
Axis Z 400 mm
Axis U 240 mm
Axis V 240 mm
Max piece lenght 1000 mm
Max piece width 810 mm
Max piece height 400...
07910
CNC ONA
Axis X 600 mm
Axis Y 400 mm
Axis Z 400 mm
Axis U 240 mm
Axis V 240 mm
Max piece lenght 1000 mm
Max piece width 810 mm
Max piece height 400...
BORING PBR MOD. AF 90
PBR
06786
TABLE:
Rotary table dimensions mm 950x1200
Axis X mm 1520
Axis Y mm 1220
Axis Z mm 1450
SPINDLE:
Boring spindle diameter mm 90
Quill stroke mm...
06786
TABLE:
Rotary table dimensions mm 950x1200
Axis X mm 1520
Axis Y mm 1220
Axis Z mm 1450
SPINDLE:
Boring spindle diameter mm 90
Quill stroke mm...
CENTER YCM MOD. MV106A
YCM
09170
CNC FANUC MXP-100i
TABLE:
Size 1120x600 mm
Max table load Kg 800
Number of T-slots (xSizexPitch) 5xmm18xmm100
STROKES:
Longitudinal axis X 1020...
09170
CNC FANUC MXP-100i
TABLE:
Size 1120x600 mm
Max table load Kg 800
Number of T-slots (xSizexPitch) 5xmm18xmm100
STROKES:
Longitudinal axis X 1020...
LATHE PADOVANI LABOR 275x1500
PADOVANI
08828
Height of centers mm 275
Distance between centers mm 1500
Turning diameter on the gap mm 740
Turning diameter on the cross slide mm 360
Gap lenght mm...
08828
Height of centers mm 275
Distance between centers mm 1500
Turning diameter on the gap mm 740
Turning diameter on the cross slide mm 360
Gap lenght mm...
LATHE PBR TM-25 250x4000
PBR
07398
MOD. TM-25
CAPACITY:
Height center mm 250
Distance between center mm 4000
Max turning diameter on the bed mm 530
Maxturning diametr on the carriage...
07398
MOD. TM-25
CAPACITY:
Height center mm 250
Distance between center mm 4000
Max turning diameter on the bed mm 530
Maxturning diametr on the carriage...
LATHE PPL KRYPTON ROTOPALLET
PPL KRYPTON
05948
CNC VECTOR AB OSAI 8600
Max swing diameter mm.800
Max turning diameter mm.600
Max turning height from chuck mm.490
Axis X mm.460
Axis Z...
05948
CNC VECTOR AB OSAI 8600
Max swing diameter mm.800
Max turning diameter mm.600
Max turning height from chuck mm.490
Axis X mm.460
Axis Z...
PRESS WARCOM FUTURA 200-40
WARCOM
06581
HYDRAULIC 4 AXIS
Max force Ton 200
Bending lenght mm 4200
Distance between frames mm 3550
Throath depth mm 500
Distance between table and upper beam...
06581
HYDRAULIC 4 AXIS
Max force Ton 200
Bending lenght mm 4200
Distance between frames mm 3550
Throath depth mm 500
Distance between table and upper beam...
ERODER WIRE MITSUBISHI BA8
MITSUBISHI
06920
CNC Mitsubishi
X stroke 320 mm
Y stroke 250 mm
Z stroke 220 mm
Thread diameter from 0.10 mm to 0.30 mm
V axis stroke +/- 32 mm
U axis stroke +/- 32...
06920
CNC Mitsubishi
X stroke 320 mm
Y stroke 250 mm
Z stroke 220 mm
Thread diameter from 0.10 mm to 0.30 mm
V axis stroke +/- 32 mm
U axis stroke +/- 32...
GRINDING ACROSS 5000
ACROSS
07413
Height center mm 375
Swing diameter mm 750
Wheel motor power HP 15
Wheel motor speed rpm 1450
Wheel dimensions mm 600x85
Overall dimensions mm...
07413
Height center mm 375
Swing diameter mm 750
Wheel motor power HP 15
Wheel motor speed rpm 1450
Wheel dimensions mm 600x85
Overall dimensions mm...
GRINDING ALPA RTM 3000x600
ALPA
08901
Axis X mm 3000
Axis Y mm 600
Axis Z (vertical) mm 450
Electromagnetic plane mm 3000x550
USED MACHINE
08901
Axis X mm 3000
Axis Y mm 600
Axis Z (vertical) mm 450
Electromagnetic plane mm 3000x550
USED MACHINE
LATHE BIGLIA MOD. B42-S2M
BIGLIA
07801
CNC GE FANUC serie O-TT
SUB-SPINDLE
N.02 TURRET
LIVE TOOLS
TECHNICAL DETAILS:
-Max turning diameter 160 mm
-Max turning lenght 300 mm
MAIN...
07801
CNC GE FANUC serie O-TT
SUB-SPINDLE
N.02 TURRET
LIVE TOOLS
TECHNICAL DETAILS:
-Max turning diameter 160 mm
-Max turning lenght 300 mm
MAIN...
LATHE CMT MOD. URSUS TC 500X1500
CMT
New04801
AUTOLATHE
CNC FAGOR 8055T
-HEIGHT OF CENTER FROM PLAN MM.250
-DISTANCE BETWEEN CENTRE MM.1500
-MAX DIAM OVER PLAN MM.505
-MAX DIAM OVER SLIDE...
New04801
AUTOLATHE
CNC FAGOR 8055T
-HEIGHT OF CENTER FROM PLAN MM.250
-DISTANCE BETWEEN CENTRE MM.1500
-MAX DIAM OVER PLAN MM.505
-MAX DIAM OVER SLIDE...
LATHE DMG CTX 510 ECO
DMG
08261
CNC SIEMENS 810D POWERLINE
Interaxis 1150 mm
Height of center 360 mm
Swing over bed 680 mm
Max turning diameter 465 mm
Axis X stroke 300 mm
Axis Z...
08261
CNC SIEMENS 810D POWERLINE
Interaxis 1150 mm
Height of center 360 mm
Swing over bed 680 mm
Max turning diameter 465 mm
Axis X stroke 300 mm
Axis Z...
TRIMMING BEADING OMERA R1600
OMERA
07577
CNC Siemens S7-300 + VT 170
SPINDLE:
Spindle speed giri/min 3-20
Spindle height from surface mm 125
PRESSATOR:
Max. distance pressator-spindle mm...
07577
CNC Siemens S7-300 + VT 170
SPINDLE:
Spindle speed giri/min 3-20
Spindle height from surface mm 125
PRESSATOR:
Max. distance pressator-spindle mm...
LATHE DAEWOO PUMA 300 LC
DAEWOO
07493
CNC FANUC 18i-T
CAPACITY
Swing over bed mm 570
Swing over saddle mm 370
Max machining dia. mm 400
Max work length mm 1280
Draw tube dia. mm...
07493
CNC FANUC 18i-T
CAPACITY
Swing over bed mm 570
Swing over saddle mm 370
Max machining dia. mm 400
Max work length mm 1280
Draw tube dia. mm...
BENDER PROFILES RINGROLL MOD. HPK 120
RINGROLL
New02225
Machine oleodynamic rotation of 3 rolls, oleodynamic with placing 2 independent lower rollers with digital display device and automatic shutdown,...
New02225
Machine oleodynamic rotation of 3 rolls, oleodynamic with placing 2 independent lower rollers with digital display device and automatic shutdown,...
.jpeg)
CENTER EUMACH MDO. SUMO 800
EUMACH
08750
CNC SELCA S4045PD
Table dimensions mm 1000x450
Max table load Kg 600
T-slots (n. x dimensions) 3x18
Distance between spindle nose/table plane mm...
08750
CNC SELCA S4045PD
Table dimensions mm 1000x450
Max table load Kg 600
T-slots (n. x dimensions) 3x18
Distance between spindle nose/table plane mm...
CENTER MIKRON VCP 710
MIKRON
07608
CNC HEIDENHAIN TNC 426
STROKES:
Axis X (longitudinal) mm 710
Axis Y (cross) mm 500
Axis Z (vertical) mm 500
SPINDLE MOTOR:
Spindle motor speed rpm...
07608
CNC HEIDENHAIN TNC 426
STROKES:
Axis X (longitudinal) mm 710
Axis Y (cross) mm 500
Axis Z (vertical) mm 500
SPINDLE MOTOR:
Spindle motor speed rpm...
CENTER ZPS MOD. MCFV 1060 NM
ZPS
07362
CNC SELCA S3040D
STROKE:
Axis X mm 1016
Axis Y mm 610
Axis Z mm 760
Distance between spindle nose - table surface mm 150:910
Distance between spindle...
07362
CNC SELCA S3040D
STROKE:
Axis X mm 1016
Axis Y mm 610
Axis Z mm 760
Distance between spindle nose - table surface mm 150:910
Distance between spindle...
SAW BAND DANOBAT CP-660 A CN
DANOBAT
08782
CNC DANOBAT
Round cutting capacity diam. 660 mm
Rectangular cutting capacity mm 660x660
Work table height 800 mm
Flywheels diameter 760 mm
Blade...
08782
CNC DANOBAT
Round cutting capacity diam. 660 mm
Rectangular cutting capacity mm 660x660
Work table height 800 mm
Flywheels diameter 760 mm
Blade...
.jpeg)
SAW DANOBAT MOD. CP-650A
DANOBAT
08744
CNC DANOBAT
Round cutting capacity diam. 650 mm
Rectangular cutting capacity mm 650x650
Work table height 800 mm
Flywheels diameter 760 mm
Blade...
08744
CNC DANOBAT
Round cutting capacity diam. 650 mm
Rectangular cutting capacity mm 650x650
Work table height 800 mm
Flywheels diameter 760 mm
Blade...
.jpeg)
WIRE EROSION ONA MOD. AX4
ONA
09414
CNC ONA
Axis X 600 mm
Axis Y 400 mm
Axis Z 400 mm
Axis U 240 mm
Axis V 240 mm
Max piece lenght 1000 mm
Max piece width 810 mm
Max piece height 400...
09414
CNC ONA
Axis X 600 mm
Axis Y 400 mm
Axis Z 400 mm
Axis U 240 mm
Axis V 240 mm
Max piece lenght 1000 mm
Max piece width 810 mm
Max piece height 400...
PRESS CMU EASY CAB MOD.130/30
CMU
New03285
-Bed lenght mm.3100
-Distance between frames mm.2750
-Force Ton. 130
-Throat depth mm.300
-Ram stroke mm.200
-Distance table / piston mm.395...
New03285
-Bed lenght mm.3100
-Distance between frames mm.2750
-Force Ton. 130
-Throat depth mm.300
-Ram stroke mm.200
-Distance table / piston mm.395...
SAW MILL FRIGGI
FRIGGI
06997
MOD. STP 520x700 ACN
AUTOMATIC DOUBLE COLUMN
-Cutting capacity rectangle mm 520x700
-Blade dimensions mm 8670x54x1.6
-Blade rotation speed m/min...
06997
MOD. STP 520x700 ACN
AUTOMATIC DOUBLE COLUMN
-Cutting capacity rectangle mm 520x700
-Blade dimensions mm 8670x54x1.6
-Blade rotation speed m/min...
.jpeg)
5 AXIS FIDIA K165/RT
FIDIA
10183
Numerical control FIDIA C1
X-axis 1000 mm
Y-axis 620 mm
Z-axis 500 mm
Linear axis speed X-Y 40 m/min Z 30 m/min
Spindle taper HSK63E/A
Max. spindle...
10183
Numerical control FIDIA C1
X-axis 1000 mm
Y-axis 620 mm
Z-axis 500 mm
Linear axis speed X-Y 40 m/min Z 30 m/min
Spindle taper HSK63E/A
Max. spindle...
CENTER MAS KOVOSVIT MCV 750
MAS KOVOSVIT
07004
CNC HEIDENHAIN TNC 430
TECHNICAL DATA:
-Table dimensions mm 1000x500
-T-slots n.3
-T-slots width and pitch mm 18/125
-Axis X stroke mm 750
-Axis Y...
07004
CNC HEIDENHAIN TNC 430
TECHNICAL DATA:
-Table dimensions mm 1000x500
-T-slots n.3
-T-slots width and pitch mm 18/125
-Axis X stroke mm 750
-Axis Y...
ERODER WIRE FANUC
FANUC
07012
ROBOCUT
-Max piece dimensions mm 650x450x250
-Max piece weight Kg 500
-Table stroke mm 320x220
-Axis Z stroke mm 255
-Axis U V stroke +/- 60 mm x...
07012
ROBOCUT
-Max piece dimensions mm 650x450x250
-Max piece weight Kg 500
-Table stroke mm 320x220
-Axis Z stroke mm 255
-Axis U V stroke +/- 60 mm x...
GEAR HOBBING BUZZI
GRINDING ROSA LINEA IRON 12.6
ROSA
08155
CN ROSA SYSTEM
Longitudinal stroke mm 1350
Grinding longitudinal mm 1250
Table surface mm 1200x450
Max load in table Kg 1300
Cross stroke mm...
08155
CN ROSA SYSTEM
Longitudinal stroke mm 1350
Grinding longitudinal mm 1250
Table surface mm 1200x450
Max load in table Kg 1300
Cross stroke mm...
LATHE CMZ MOD. TB 67
CMZ
06986
SLANT BED 30°
CNC FANUC 32i-Model A
Diameter over bed mm 640
Max machining diameter mm 340
Max working length mm 400
Max bar diameter mm 66
Strokes...
06986
SLANT BED 30°
CNC FANUC 32i-Model A
Diameter over bed mm 640
Max machining diameter mm 340
Max working length mm 400
Max bar diameter mm 66
Strokes...
LATHE MIND MOD. DART SL 40
MIND
05868
CNC FANUC Oi TC
Machine structure:
-Spheroidal cast iron bed treated for accuracy guarantee during time with slant 30 degrees
-Prismatic guideways...
05868
CNC FANUC Oi TC
Machine structure:
-Spheroidal cast iron bed treated for accuracy guarantee during time with slant 30 degrees
-Prismatic guideways...
LATHE OMG 300x3000
OMG ZANOLETTI
08789
Height of center mm 300
Distance between center mm 3000
Bar passaging mm 90
Spindle taper CAM-LOCK 8''
EQUIPPED WITH:
- 2 axis D.R.O.
- fixed steady...
08789
Height of center mm 300
Distance between center mm 3000
Bar passaging mm 90
Spindle taper CAM-LOCK 8''
EQUIPPED WITH:
- 2 axis D.R.O.
- fixed steady...
LATHE PONTIGGIA 450X3000
PONTIGGIA
08182
MOD. NH 450 LEPONT
Height of center mm 450
Turning diameter on the bed mm 900
Turning diameter on the carriage mm 700
Distance between center mm...
08182
MOD. NH 450 LEPONT
Height of center mm 450
Turning diameter on the bed mm 900
Turning diameter on the carriage mm 700
Distance between center mm...
MILLING MOMAC MOD. FU-2
MOMAC
06968
Table dimensions mm 1400x300
Longitudinal stroke mm 1100
Cross stroke mm 300
Vertical stroke mm 450
Spindle speed 12 v. 40-1800 Rpm
T-slots n.5...
06968
Table dimensions mm 1400x300
Longitudinal stroke mm 1100
Cross stroke mm 300
Vertical stroke mm 450
Spindle speed 12 v. 40-1800 Rpm
T-slots n.5...
MILLING SECMU
SECMU
07619
Axis X mm 2100
Axis Y mm 900
Axis Z mm 1500
Spindle taper ISO 50
Equipped with:
Head
Coolant spindle unit
New spindle motor (2014)
Total retrofit...
07619
Axis X mm 2100
Axis Y mm 900
Axis Z mm 1500
Spindle taper ISO 50
Equipped with:
Head
Coolant spindle unit
New spindle motor (2014)
Total retrofit...
PRESETTER ZOLLER MOD. GENIUS 3
ZOLLER
07071
TRAVEL:
Axis Z mm 600
Axis X mm 175
Axis Y mm 100
MEASURING RANGE:
Longitudinal axis mm 570
Diameter mm 340
TOOL DIMENSIONS:
Diameter snap gauge up...
07071
TRAVEL:
Axis Z mm 600
Axis X mm 175
Axis Y mm 100
MEASURING RANGE:
Longitudinal axis mm 570
Diameter mm 340
TOOL DIMENSIONS:
Diameter snap gauge up...
PRESS WARCOM UNICA 160-30
WARCOM
07795
CNC 4 AXIS ALPHANUMERIC
Max force Ton 160
Bed lenght mm 3200
Distance between frames mm 2800
Throat depth mm 500
Distance table/piston mm 420
Ram...
07795
CNC 4 AXIS ALPHANUMERIC
Max force Ton 160
Bed lenght mm 3200
Distance between frames mm 2800
Throat depth mm 500
Distance table/piston mm 420
Ram...
CENTER MACHINE BUFFALO MOD. VM1000
MICROCUT
08731
CNC FANUC Oi-MC
TABLE:
Table dimensions mm 1200x500
Max load Kg 1200
STROKES:
X axis mm 1000
Y axis mm 500
Z axis mm 570
SPINDLE:
Cone ISO 40
Tool...
08731
CNC FANUC Oi-MC
TABLE:
Table dimensions mm 1200x500
Max load Kg 1200
STROKES:
X axis mm 1000
Y axis mm 500
Z axis mm 570
SPINDLE:
Cone ISO 40
Tool...
LATHE PASQUINO MOD. NDS 450
PASQUINO
07439
Center height on the bed mm 450
Center height on the slide 308 mm
Height of centers on the gap 650 mm
Turning diameter 920 mm
Distance Between center...
07439
Center height on the bed mm 450
Center height on the slide 308 mm
Height of centers on the gap 650 mm
Turning diameter 920 mm
Distance Between center...
PRESS AMADA MOD. HFE 130-3
AMADA
07902
CNC
6 AXIS
Bending lenght mm 3000
Max force Ton 130
Throath depth mm 410
Stroke mm 200
Machine weight Kg 8150
USED MACHINE
YEAR 2007
07902
CNC
6 AXIS
Bending lenght mm 3000
Max force Ton 130
Throath depth mm 410
Stroke mm 200
Machine weight Kg 8150
USED MACHINE
YEAR 2007
BORING LAZZATI HB-115
LAZZATI
07566
With digital read out 3 axis
Table mm 1530x1220
TRAVEL
Axis X mm 1550
Axis Y (trasversal table) mm 1800
Axis Z (vertical) mm 1600
Spindle Diameter...
07566
With digital read out 3 axis
Table mm 1530x1220
TRAVEL
Axis X mm 1550
Axis Y (trasversal table) mm 1800
Axis Z (vertical) mm 1600
Spindle Diameter...
GRINDING SCHAUDT 2000x315
LATHE GRAZIANO SAG 20
GRAZIANO
07292
Height of center mm 254
Distance between center mm 2000
Max diameter swing over carriage mm 325
Max diameter swing over gap mm 708
Spindle speed Rpm...
07292
Height of center mm 254
Distance between center mm 2000
Max diameter swing over carriage mm 325
Max diameter swing over gap mm 708
Spindle speed Rpm...
LATHE NAKAMURA TOME SC 150
NAKAMURA
05803
CNC FANUC 21iTA
SWING DIAMETER OVER GUIDE MM 660
DISTANCE BETWEEN THE CENTER MM 479
MAX TURNING DIAMETER MM 220
MAX TURNING LENGHT MM 305
BAR...
05803
CNC FANUC 21iTA
SWING DIAMETER OVER GUIDE MM 660
DISTANCE BETWEEN THE CENTER MM 479
MAX TURNING DIAMETER MM 220
MAX TURNING LENGHT MM 305
BAR...
LATHE SAMSUNG MOD. PL20 A/500
SAMSUNG
08641
CNC FANUC Oi-TC
Max diameter over the bed mm 450
Max turning diameter mm 240
Distance between center mm 370
Max turning lenght mm 300
X stroke mm...
08641
CNC FANUC Oi-TC
Max diameter over the bed mm 450
Max turning diameter mm 240
Distance between center mm 370
Max turning lenght mm 300
X stroke mm...
LATHE TACCHI FTA 500x7000
TACCHI
06736
Height of center mm 500
Distance between centers mm 7000
Turning diameter over the bed mm 1050
Turning diameter over the carriage mm 800
Turning...
06736
Height of center mm 500
Distance between centers mm 7000
Turning diameter over the bed mm 1050
Turning diameter over the carriage mm 800
Turning...
LATHE TAKISAWA MOD. EX-110
TAKISAWA
08891
CNC FANUC 21i-T
Turning diameter over bed 495 mm
Turning diameter over cross slide 400 mm
Distance between center 845 mm
Max turniing diameter 400...
08891
CNC FANUC 21i-T
Turning diameter over bed 495 mm
Turning diameter over cross slide 400 mm
Distance between center 845 mm
Max turniing diameter 400...
SAW BAND MEGA MOD. KBS-HD 760 SA
MEGA
05917
SEMI-AUTOMATIC HYDRAULIC
CUTTING BY STEP DEGREES
cutting capacity round 0° mm.460
cutting capacity rectangle 0° mm.760x400
blade size...
05917
SEMI-AUTOMATIC HYDRAULIC
CUTTING BY STEP DEGREES
cutting capacity round 0° mm.460
cutting capacity rectangle 0° mm.760x400
blade size...
SHEAR WARCOM MAXIMA 30-10/12
WARCOM
07794
CNC
Cutting lenght mm 3050
Distance between centers mm 3150
Gap depht mm 500
Cutting capacity R=42 Kg/mmq:
-Nominal thickness mm 10
-Max thickness...
07794
CNC
Cutting lenght mm 3050
Distance between centers mm 3150
Gap depht mm 500
Cutting capacity R=42 Kg/mmq:
-Nominal thickness mm 10
-Max thickness...
BENDING ROLL BIKO MOD. B3-3128
BIKO
06965
3 ROLLS
Rolling capacity (cold) mm 15
Prebend capacity (cold) mm 12
With shell ring diameter min. mm 1425
Material (Limite di snervamento) 260...
06965
3 ROLLS
Rolling capacity (cold) mm 15
Prebend capacity (cold) mm 12
With shell ring diameter min. mm 1425
Material (Limite di snervamento) 260...
.JPG)
GRINDING ZOCCA 3000 RU IDRO
ZOCCA
07410
Height of center mm 180
Max diameter mm 360
Distance between centre mm 3000
Wheel size mm 457x76x127
Head rotation +/-45 degrees
Spindle motor...
07410
Height of center mm 180
Max diameter mm 360
Distance between centre mm 3000
Wheel size mm 457x76x127
Head rotation +/-45 degrees
Spindle motor...
LATHE CMT URSUS 300x1500
CMT
09671
Height of centers 300 mm
Distance between centers 1500 mm
Spindle bore 105 mm
Spindle nose CAM-LOCK 8''
Front bearing diameter 140 mm
Max turning...
09671
Height of centers 300 mm
Distance between centers 1500 mm
Spindle bore 105 mm
Spindle nose CAM-LOCK 8''
Front bearing diameter 140 mm
Max turning...
LATHE CNC ROMI MOD. G 30
ROMI
New04392
CNC GE-FANUC 21i-TA
-MAX TURNING DIAMETER UNDER HEAD MM.510
-MAX TURNING DIAMTER MM.320
-MAX TURNING LENGHT MM.1020
-SPINDLE NOSE ASA 2-8
-SPINDLE...
New04392
CNC GE-FANUC 21i-TA
-MAX TURNING DIAMETER UNDER HEAD MM.510
-MAX TURNING DIAMTER MM.320
-MAX TURNING LENGHT MM.1020
-SPINDLE NOSE ASA 2-8
-SPINDLE...
LATHE MORI SEIKI SL 150/500
MORI SEIKI
07865
CNC Mori Seiki MSD-501II
EQUIPPED WITH:
-Load IEMCA 3000
-Tool effort monitoring
-Chip conveyor
USED MACHINE
07865
CNC Mori Seiki MSD-501II
EQUIPPED WITH:
-Load IEMCA 3000
-Tool effort monitoring
-Chip conveyor
USED MACHINE
LATHE YANG MOD. ML-300
YANG
09386
CNC FANUC 0-T
WORKING AREA:
Max rotating diameter on the bench mm 600
Max turning diameter mm 300
Max turning length mm 600
STROKES:
Z-axis strokes...
09386
CNC FANUC 0-T
WORKING AREA:
Max rotating diameter on the bench mm 600
Max turning diameter mm 300
Max turning length mm 600
STROKES:
Z-axis strokes...
MEASURING ZEISS MOD. O-INSPECT 322
ZEISS
09330
MACHINE TECHNICAL DATA
Useful measuring range:
X= 300mm, Y= 200mm, Z=200mm
Maximum Permitted Errors "MPE" (Max Permissible Error, according to...
09330
MACHINE TECHNICAL DATA
Useful measuring range:
X= 300mm, Y= 200mm, Z=200mm
Maximum Permitted Errors "MPE" (Max Permissible Error, according to...
LATHE TAKISAWA MOD. EX-106
TAKISAWA
06651
(Manual guide with tool graphic simulation)
CNC FANUC 21i-TB
WORKING CAPACITY:
-Swing diameter over bed mm 360
-Swing diameter over carriage mm...
06651
(Manual guide with tool graphic simulation)
CNC FANUC 21i-TB
WORKING CAPACITY:
-Swing diameter over bed mm 360
-Swing diameter over carriage mm...
MECHANICAL GUILLOTINE SHEAR
SAY-MAK
10377
SAY-MAK SRGM LT 1560x5
Technical specifications:
Cutting length 1560 mm
Cutting capacity (420 N/mm2) 5 mm
Strokes per minute 31
Main motor power...
10377
SAY-MAK SRGM LT 1560x5
Technical specifications:
Cutting length 1560 mm
Cutting capacity (420 N/mm2) 5 mm
Strokes per minute 31
Main motor power...
SHEAR BARIOLA CT 4000-10
BARIOLA
07778
CNC ESA ELEKTRA 400
Cutting lenght mm 4100
Cutting thickness mm 10
Distance between columns mm 4650
Variable cutting angle mm 0,5-2
Number of cutting...
07778
CNC ESA ELEKTRA 400
Cutting lenght mm 4100
Cutting thickness mm 10
Distance between columns mm 4650
Variable cutting angle mm 0,5-2
Number of cutting...
GRINDING LODI MOD. T 60.35 CN
LODI
08752
Max table longitudinal stroke 700 mm
Max table cross stroke 350 mm
Grinding length mm 600
Grinding width 350 mm
Worktop dimensions mm...
08752
Max table longitudinal stroke 700 mm
Max table cross stroke 350 mm
Grinding length mm 600
Grinding width 350 mm
Worktop dimensions mm...
LATHE BMP 210x1500
BMP
08263
Height of center mm 210
Turning diameter over bed mm 420
Turning diameter over carriage mm 265
Bed width mm 280
Distance between center mm...
08263
Height of center mm 210
Turning diameter over bed mm 420
Turning diameter over carriage mm 265
Bed width mm 280
Distance between center mm...
CENTER SUPERMAX MOD. YCM-VMC-85A
SUPERMAX
08195
CNC MITSUBISHI MELDAS 300
TABLE:
Dimensions mm 950x400
T-slot mm 18x3x125
Max loading capacity Kg 500
STROKES:
Longitudinal stroke axis X mm...
08195
CNC MITSUBISHI MELDAS 300
TABLE:
Dimensions mm 950x400
T-slot mm 18x3x125
Max loading capacity Kg 500
STROKES:
Longitudinal stroke axis X mm...
CNC FRONTAL LATHE PONTIGGIA
PPL PONTIGGIA
New02676
CNC FANUC OT
TURNING DIAMETER MM 750
CHUCK DIAMETER MM 400
BED WIDTH MM 600
AXIS Z MM 410
AXIS X MM 580
CHIP CONVEYOR
TURRET 6 POSITIONS
USED MACHINE
New02676
CNC FANUC OT
TURNING DIAMETER MM 750
CHUCK DIAMETER MM 400
BED WIDTH MM 600
AXIS Z MM 410
AXIS X MM 580
CHIP CONVEYOR
TURRET 6 POSITIONS
USED MACHINE
LATHE CNC GRAZIANO MT 500C
GRAZIANO
08061
CNC Heidenhain
WORKING RANGE:
Max swing mm 550
Max turning diameter mm 400
Max diameter over slide mm 345
Distance centre mm 1000
Longitudinal Z...
08061
CNC Heidenhain
WORKING RANGE:
Max swing mm 550
Max turning diameter mm 400
Max diameter over slide mm 345
Distance centre mm 1000
Longitudinal Z...
LATHE MERLI 410x6000
MERLI CLOVIS
08246
Diametro tornibile sul banco mm 820
Diametro rotante sull'incavo naturale mm 1000
Diametro tornibile sul carrello trasversale mm 600
Distanza punte...
08246
Diametro tornibile sul banco mm 820
Diametro rotante sull'incavo naturale mm 1000
Diametro tornibile sul carrello trasversale mm 600
Distanza punte...
.JPG)
LATHE PASQUINO PFN 350x6000
PASQUINO
07442
Center height mm 360
Turning diameter on the bed 725 mm
Turning diameter on the gap 760 mm
Turning diameter in the gap mm 1000
Turning diameter on...
07442
Center height mm 360
Turning diameter on the bed 725 mm
Turning diameter on the gap 760 mm
Turning diameter in the gap mm 1000
Turning diameter on...
LATHE PONTIGGIA PPL 450
PONTIGGIA
07814
CNC Fanuc 0i-TD
Height of center mm 450
Distance between center mm 3000
Automatic 4 positions tool post
EQUIPPED WITH:
3 Jaws chuck
Chip conveyor...
07814
CNC Fanuc 0i-TD
Height of center mm 450
Distance between center mm 3000
Automatic 4 positions tool post
EQUIPPED WITH:
3 Jaws chuck
Chip conveyor...
LATHE TORGIM 400x5000
TORGIM
TRN.PAG.O564
height of centre from table mm.400
height of centre from carriage mm.280
distance between frames mm.5000
bench width mm.415
notch width mm.450
Max...
TRN.PAG.O564
height of centre from table mm.400
height of centre from carriage mm.280
distance between frames mm.5000
bench width mm.415
notch width mm.450
Max...
MILLING SACHMAN ARAKOS 521
SACHMAN
08856
Table dimensions mm 2000x700
Axis X stroke mm 1800
Axis Y stroke mm 900
Axis Z stroke mm 1000
Spindle speed rpm 40-2000
Spindle taper ISO 50
Motor...
08856
Table dimensions mm 2000x700
Axis X stroke mm 1800
Axis Y stroke mm 900
Axis Z stroke mm 1000
Spindle speed rpm 40-2000
Spindle taper ISO 50
Motor...
PROFILE BENDER MG MOD. AR 110
MG
09708
HYDRAULIC 3 ROLLER
Shaft diameter 110 mm
Roller diameter 380 mm
Power kW 7.5/HP 10
Approx. machine weight 2950 kg
USED MACHINE
09708
HYDRAULIC 3 ROLLER
Shaft diameter 110 mm
Roller diameter 380 mm
Power kW 7.5/HP 10
Approx. machine weight 2950 kg
USED MACHINE
SANDING MACHINE SIRSI
SIRSI METALLISATOR
07830
EUROSIMPLA AL-P-2000 STR
02 turbine power 15 HP each
max dimension H mm 2000 diam 1800 mm
USED MACHINE
07830
EUROSIMPLA AL-P-2000 STR
02 turbine power 15 HP each
max dimension H mm 2000 diam 1800 mm
USED MACHINE
SHEAR GUILLOTINE VIMERCATI MOD. 4050x10
VIMERCATI
06113
Max cutting capacity mm 10
Max cutting lenght mm 4050
Distance between columns mm 4200
Cutting angle adjustment da 30' a 2°
Max register stroke mm...
06113
Max cutting capacity mm 10
Max cutting lenght mm 4050
Distance between columns mm 4200
Cutting angle adjustment da 30' a 2°
Max register stroke mm...
VERTICAL LATHE SEDIN 1512
SEDIN
08096
Max workpiece diameter mm 1200
Max workpiece weight mm 1000
Faceplate diameter mm 1100
Vertical crossrail travel mm 900
Turret 5 positions automatic...
08096
Max workpiece diameter mm 1200
Max workpiece weight mm 1000
Faceplate diameter mm 1100
Vertical crossrail travel mm 900
Turret 5 positions automatic...
GRINDING FREEPORT SGS2040AHD
FREEPORT
09213
Table surface 1016x508 mm
Longitudinal stroke 1116 mm
Cross stroke 560 mm
Wheel dimensions mm 406x75x127
Allowed weight Kg 1000
Machine weight Kg...
09213
Table surface 1016x508 mm
Longitudinal stroke 1116 mm
Cross stroke 560 mm
Wheel dimensions mm 406x75x127
Allowed weight Kg 1000
Machine weight Kg...
LATHE COMEV MOD. CM 260
COMEV
09212
WITH D.R.O.
Height of center mm 260
Distance between center mm 2000
Spindle bore mm 110
Motor power HP 10
USED MACHINE
09212
WITH D.R.O.
Height of center mm 260
Distance between center mm 2000
Spindle bore mm 110
Motor power HP 10
USED MACHINE
MILLING ELI MOD. 250 B-EL
ELI
09210
tABLE:
Work surface 1520x330 mm
Strokes (X-Y-Z) mm 1050x410x500
VERTICAL SPINDLE:
Spindle taper ISO 40 diam. 110 mm
Vertical spindle taper...
09210
tABLE:
Work surface 1520x330 mm
Strokes (X-Y-Z) mm 1050x410x500
VERTICAL SPINDLE:
Spindle taper ISO 40 diam. 110 mm
Vertical spindle taper...
SAW BAND BTM MOD. 420 CNC
BTM
08269
AUTOMATIC CNC
CUTTING CAPACITY:
-Round mm 410
-Square mm 410
-Rectangle mm 420x410
Blade dimensions mm 5300x34x1,1
Worktop height mm 830
Blade...
08269
AUTOMATIC CNC
CUTTING CAPACITY:
-Round mm 410
-Square mm 410
-Rectangle mm 420x410
Blade dimensions mm 5300x34x1,1
Worktop height mm 830
Blade...
SHEAR CMU SWING BEAM 6/32
CMU
09248
TILTING BLADE
Cutting thickness mm 6
Cutting lenght mm 3200
Cutting angle 1° 30'
Corsa registro mm 800
Motor power kw 7,5
Machine weight Kg 7200...
09248
TILTING BLADE
Cutting thickness mm 6
Cutting lenght mm 3200
Cutting angle 1° 30'
Corsa registro mm 800
Motor power kw 7,5
Machine weight Kg 7200...
SURFACE GRINDING ALPA MOD. RT 1100
ALPA
New02973
Lenght mm 1100
Max grinding lenght mm 1100
Max longitudinal stroke mm 1300
Table lenght mm 400
Max grinding width mm 550
Traslation speed of...
New02973
Lenght mm 1100
Max grinding lenght mm 1100
Max longitudinal stroke mm 1300
Table lenght mm 400
Max grinding width mm 550
Traslation speed of...
GRINDING TACCHELLA M 1018 UA
TACCHELLA
06368
FOR EXTERNAL / INTERNAL
DISTANCE BETWEEN CENTRES 1000 mm
CENTRE HEIGHT 180 mm
GRINDING WHEEL DIMENSIONS 450x20x127 mm
GRINDING WHEEL SPEED 1450...
06368
FOR EXTERNAL / INTERNAL
DISTANCE BETWEEN CENTRES 1000 mm
CENTRE HEIGHT 180 mm
GRINDING WHEEL DIMENSIONS 450x20x127 mm
GRINDING WHEEL SPEED 1450...
LATHE OMG ZANOLETTI 225x1500
OMG ZANOLETTI
09163
MOD. TP 225x1500
Turning diameter over bed 450 mm
Swing diameter overthe gap 630 mm
Turning diameter on the carriage 280 mm
Length of the carriage...
09163
MOD. TP 225x1500
Turning diameter over bed 450 mm
Swing diameter overthe gap 630 mm
Turning diameter on the carriage 280 mm
Length of the carriage...
LATHE PADOVANI 230x1500
PADOVANI
07858
Height of center mm 230
Distance between center mm 1500
Turning diameter over gap mm 690
Turning diameter over slide mm 278
Gap lenght mm 300
Bed...
07858
Height of center mm 230
Distance between center mm 1500
Turning diameter over gap mm 690
Turning diameter over slide mm 278
Gap lenght mm 300
Bed...
PIECE WASHING MAIN SOLUTION RU-2AC
MAGAZINE MODULA SYSTEM MOD. MX50D
MODULA
08181
VERTICAL, AUTOMATIC
MODULA CONTROLLER:
Microprocessor GEODE 300 Mhz
MODULA CONSOLLE:
10,4'' TFT schermo a colori Touch Screen
FEATURES:
Modula...
08181
VERTICAL, AUTOMATIC
MODULA CONTROLLER:
Microprocessor GEODE 300 Mhz
MODULA CONSOLLE:
10,4'' TFT schermo a colori Touch Screen
FEATURES:
Modula...
SPARK ERODER ONA TECNO H-400
ONA
09652
3-axis controlled
AXIS TRAVELS:
X mm 600
Y mm 400
Z mm 400
Tank size mm 1200x800x400
Table mm 800x600
Maximum load capacity 1.500 kg
C axis 360...
09652
3-axis controlled
AXIS TRAVELS:
X mm 600
Y mm 400
Z mm 400
Tank size mm 1200x800x400
Table mm 800x600
Maximum load capacity 1.500 kg
C axis 360...
USED INDUSTRIAL OVEN
SERMAC
09981
Electric Fan Oven mod. CDTM 2000 - AMS 2750 E
Max temperature 300°C
Working temperatures From 60°C up to 240°C
Max temperature deviation in the...
09981
Electric Fan Oven mod. CDTM 2000 - AMS 2750 E
Max temperature 300°C
Working temperatures From 60°C up to 240°C
Max temperature deviation in the...
SLOTTING MACHINE EGITAL MOD. S 200
EGITAL
New01672
- Tool travel mm.0-200
- Stroke 20:70
- Distance table/head mm.390
- Swivel angle of head +/- 45.
- Worktable mm.600x300
- Ram adjustment mm.250...
New01672
- Tool travel mm.0-200
- Stroke 20:70
- Distance table/head mm.390
- Swivel angle of head +/- 45.
- Worktable mm.600x300
- Ram adjustment mm.250...
EXTERNAL GRINDING MACHINE ZOCCA RU 1500/3
ZOCCA
07443
Height of center mm 230
Grinding diameter mm 460
Grinding lenght mm 1500
Wheel dimensions mm 450x100x254
Spindle power Kw 7
Weight of machine 5800...
07443
Height of center mm 230
Grinding diameter mm 460
Grinding lenght mm 1500
Wheel dimensions mm 450x100x254
Spindle power Kw 7
Weight of machine 5800...
GRINDING DELTA MOD. TP 900/60
DELTA
07513
Table surface 1250x500 mm
Max grinding lenght 900 mm
Max grinding width 600 mm
Max distance spindle axis/table plane 600 mm
Spindle speed 1450...
07513
Table surface 1250x500 mm
Max grinding lenght 900 mm
Max grinding width 600 mm
Max distance spindle axis/table plane 600 mm
Spindle speed 1450...
.jpeg)
GRINDING RIBON UTG 1000
RIBON
08830
Distance between centers mm 1.000
Center height 150 mm
Equipped with:
-Marposs internal external
-Self-centering
-Various wheels for internal and...
08830
Distance between centers mm 1.000
Center height 150 mm
Equipped with:
-Marposs internal external
-Self-centering
-Various wheels for internal and...
.jpg)
LATHE CASTOR 2555 VSX2000
BULCOM
09717
Height center 255 mm
Distance between centers 2100 mm
Turning diameter on the bed 510 mm
Turning diameter on the cross carriage 330 mm
Turning...
09717
Height center 255 mm
Distance between centers 2100 mm
Turning diameter on the bed 510 mm
Turning diameter on the cross carriage 330 mm
Turning...
.jpeg)
LATHE EGITAL MOD.29P/103x2000
EGITAL
09313
Height of center mm 290
Distance between centers mm 2000
Bed width mm 450
Turning diameter on the bed mm 580
Turning diameter on the carriage mm...
09313
Height of center mm 290
Distance between centers mm 2000
Bed width mm 450
Turning diameter on the bed mm 580
Turning diameter on the carriage mm...
LATHE OMG 250x1500
OMG ZANOLETTI
06959
Height of center mm 250
Max diameter swing over bed mm 500
Max diameter swing over cross carriage mm 320
Max diameter swing over gap mm 700
Gap...
06959
Height of center mm 250
Max diameter swing over bed mm 500
Max diameter swing over cross carriage mm 320
Max diameter swing over gap mm 700
Gap...
LATHE OMG ZANOLETTI 290x3000
OMG ZANOLETTI
09011
Height of center mm 290
Distance between centers mm 3000
Spindle bore mm 105
EQUIPPED WITH:
-DRO 3 axis
-Turret type C
USED MACHINE
09011
Height of center mm 290
Distance between centers mm 3000
Spindle bore mm 105
EQUIPPED WITH:
-DRO 3 axis
-Turret type C
USED MACHINE
LATHE VERTCAL MORANDO MOD. VK09
MORANDO
New04675
-SPINDLE DIAM MM.900
-SWING DIAM MM.1100
-SWING HEIGHT MM.900
EQUIPED WITH ACCESSORIES
USED MACHINE
New04675
-SPINDLE DIAM MM.900
-SWING DIAM MM.1100
-SWING HEIGHT MM.900
EQUIPED WITH ACCESSORIES
USED MACHINE
MEASURING MACHINE OGP HOMMEL
OPG HOMMEL
09228
QVI SMARTSCOPE SPRINT MVP300
The SprintMVP automatic measuring systems are built on a solid granite base and are equipped with a high definition...
09228
QVI SMARTSCOPE SPRINT MVP300
The SprintMVP automatic measuring systems are built on a solid granite base and are equipped with a high definition...
MILLING MOMAC MOD. FU 2
MOMAC
06458
-Table dimensions mm 1400x300
-Longitudinal stroke mm 1100
-Cross stroke mm 360
-Vertical stroke mm 500
Equiped with:
-Digital redaout system for 3...
06458
-Table dimensions mm 1400x300
-Longitudinal stroke mm 1100
-Cross stroke mm 360
-Vertical stroke mm 500
Equiped with:
-Digital redaout system for 3...
PRESS BRAKE HACO MOD. PPM 30100
HACO
07634
Bed lenght 3000 mm
Force 100 Ton
Gap 250 mm
Equipped with:
Cnc kvara 2 axis Y - X
Photocells and protection
USED MACHINE
07634
Bed lenght 3000 mm
Force 100 Ton
Gap 250 mm
Equipped with:
Cnc kvara 2 axis Y - X
Photocells and protection
USED MACHINE
PUNCHING MACHINE IMAC HP 750 CNP
IMAC
07339
Punching force ton. 40
Axis X mm 1000
Axis Y mm 750
Max punching thickness mm 10
Strokes number (1 mm) 150
Max punching diameter mm 105
Max punching...
07339
Punching force ton. 40
Axis X mm 1000
Axis Y mm 750
Max punching thickness mm 10
Strokes number (1 mm) 150
Max punching diameter mm 105
Max punching...
.jpeg)
SANDING MACHINE GECAM G-6 RR
GECAM
09738
Working groups 2
Roller motor kW 5.5
Brush motor kW 3
Compressed air bar 6
Belt length 1900 mm
Working width 670 mm
Belt width 670 mm
Min thikness mm...
09738
Working groups 2
Roller motor kW 5.5
Brush motor kW 3
Compressed air bar 6
Belt length 1900 mm
Working width 670 mm
Belt width 670 mm
Min thikness mm...
SATINING MACHINE COSTA MOD. M A CCS 1150
COSTA
06562
-Working lenght mm 1150
-Width longitudinal abrasive belt mm 1180
-Lenght long. abrasive belt mm 2620
-Working thickness min/ max mm 0,8 -...
06562
-Working lenght mm 1150
-Width longitudinal abrasive belt mm 1180
-Lenght long. abrasive belt mm 2620
-Working thickness min/ max mm 0,8 -...
SAW BAND FORTE MOD. SBA 421/S
FORTE
06115
AUTOMATIC, DOUBLE COLUMN
Height working table mm 900
Blade size mm 6050 x 41 x 1,3
Blade guide - synchronous to the morse
Blade pulley diameter mm...
06115
AUTOMATIC, DOUBLE COLUMN
Height working table mm 900
Blade size mm 6050 x 41 x 1,3
Blade guide - synchronous to the morse
Blade pulley diameter mm...
SLOTTING PERINI CMO 250 CNC
PERINI
06955
Tool stroke adjustable from mm 50 a 250
Distance between column and toolholder mm 450
Distance between table and head mm 460
Distance between rotary...
06955
Tool stroke adjustable from mm 50 a 250
Distance between column and toolholder mm 450
Distance between table and head mm 460
Distance between rotary...
VERTICAL SLOTTING MACHINE
08248
Cross stroke mm 600
Vertical tool stroke mm 480
Max working piece height mm 500
Table dimensions diam. mm 850
Max rpm 340
Motor power kW 2,5
Machine...
Cross stroke mm 600
Vertical tool stroke mm 480
Max working piece height mm 500
Table dimensions diam. mm 850
Max rpm 340
Motor power kW 2,5
Machine...
DRILLING BERGONZI
BERGONZI
09038
MOD. HYDROBLOC TR40-1250H
Drilling capacity mm 40
Arm lenght mm 1250
Weight Kg 1850
EQUIPPED WITH:
-Tilting cube
USED MACHINE
09038
MOD. HYDROBLOC TR40-1250H
Drilling capacity mm 40
Arm lenght mm 1250
Weight Kg 1850
EQUIPPED WITH:
-Tilting cube
USED MACHINE
DRILLING BERGONZI SERIES 3
BERGONZI
09657
TM 50/1600
Hydraulic clamping
Maximum drilling capacity ø 50 on Fe, ø 65 mm on cast iron
Maximum tapping capacity 50 mm
Arm length 1600 mm
Column...
09657
TM 50/1600
Hydraulic clamping
Maximum drilling capacity ø 50 on Fe, ø 65 mm on cast iron
Maximum tapping capacity 50 mm
Arm length 1600 mm
Column...
DRILLING BERGONZI TR40/1250H
BERGONZI
06864
Max drilling on cast iron mm 40
Max drilling on steel mm 50
Arm straddle mm 1250
Arm travel mm 600
Head travel mm 1000
Max distance between spindle...
06864
Max drilling on cast iron mm 40
Max drilling on steel mm 50
Arm straddle mm 1250
Arm travel mm 600
Head travel mm 1000
Max distance between spindle...
.jpg)
GRINDING MAJEVICA BM 510/B
MAJEVICA
08354
TABLE SIZE 1200x450 mm
MAX GRINDING LENGTH 1130 mm
MAX GRINDING WIDTH 600 mm
LONGITUDINAL TRAVEL 1130 mm
CROSS TRAVEL 500 mm
VERTICAL TRAVEL 600...
08354
TABLE SIZE 1200x450 mm
MAX GRINDING LENGTH 1130 mm
MAX GRINDING WIDTH 600 mm
LONGITUDINAL TRAVEL 1130 mm
CROSS TRAVEL 500 mm
VERTICAL TRAVEL 600...
GRINDING RUSSIAN MM.3000
New04960
-GRINDING LENGTH MM.3000
-HEIGHT OF CENTRE MM.300
USED MACHINE
-GRINDING LENGTH MM.3000
-HEIGHT OF CENTRE MM.300
USED MACHINE
LATHE MOMAC MOD. SV 230x1000
MOMAC
08156
MAIN FEATURES:
Height od center mm 230
Distance between center mm 1000
Max turning diameter on bed mm 450
Max turning diameter on gap mm 640
Max...
08156
MAIN FEATURES:
Height od center mm 230
Distance between center mm 1000
Max turning diameter on bed mm 450
Max turning diameter on gap mm 640
Max...
.jpeg)
LATHE OMG ZANOLETTI 210x1500
OMG ZANOLETTI
09527
Height center mm 210
Turning diameter over bed mm 420
Turning diameter over carriage mm 260
Distance between centers mm 1500
Bench width mm 350...
09527
Height center mm 210
Turning diameter over bed mm 420
Turning diameter over carriage mm 260
Distance between centers mm 1500
Bench width mm 350...
MILLING ITAMA MOD. FV 20 VS
ITAMA
09557
QUICK HEAD
TABLE:
Dimensions 1270x254 mm
T-slots n.03 - 16x63 mm
Max table load 150 kg
AXES:
X axis longitudinal strokel 780 mm
Y axis transversal...
09557
QUICK HEAD
TABLE:
Dimensions 1270x254 mm
T-slots n.03 - 16x63 mm
Max table load 150 kg
AXES:
X axis longitudinal strokel 780 mm
Y axis transversal...
MILLING MEXIM MOD. FU 36
MEXIM
08259
Table dimensions mm 1600x360
Axis X stroke mm 1100
Axis Y stroke mm 300
Axis Z stroke mm 420
Spindle speed n.12 / rpm 56-1800
Spindle motor power kW...
08259
Table dimensions mm 1600x360
Axis X stroke mm 1100
Axis Y stroke mm 300
Axis Z stroke mm 420
Spindle speed n.12 / rpm 56-1800
Spindle motor power kW...
SAW BAND KASTO MOD. 450 SFA
SURFACE GRINDER PROTH 3060
PROTH
07955
Max travel (trasversalxlongitudinal) mm 340x700
grinding surface mm 300x600
Distanzce center height from table mm 500
Wheel dimesions mm...
07955
Max travel (trasversalxlongitudinal) mm 340x700
grinding surface mm 300x600
Distanzce center height from table mm 500
Wheel dimesions mm...
SHEAR STEEL CUTTING OMERA
OMERA
06967
MOD. OM 90 HY
PUNCHING:
Max hole of 35 mm on a thickness of mm 20
IPN i-beams in flange on profiles with size between mm 240 and 500
UPN channels in...
06967
MOD. OM 90 HY
PUNCHING:
Max hole of 35 mm on a thickness of mm 20
IPN i-beams in flange on profiles with size between mm 240 and 500
UPN channels in...
CHAMFERING MACHINE SCHIESS
DRILLING MAS VRM 50 A
MAS
07296
Drilling capacity steel 50 mm
Max distance between spindle and column 2070 mm
Vertical travel 1250 mm
Max angle rotation 360 degree
Spindle...
07296
Drilling capacity steel 50 mm
Max distance between spindle and column 2070 mm
Vertical travel 1250 mm
Max angle rotation 360 degree
Spindle...
LATHE PADOVANI LABOR 275x1500
PADOVANI
09554
Height of centers mm 275
Distance between centers mm 1500
Bar passaging mm 105
Double guide chuck mm 270
EQUIPPED WITH:
-2 axis D.R.O.
USED MACHINE
09554
Height of centers mm 275
Distance between centers mm 1500
Bar passaging mm 105
Double guide chuck mm 270
EQUIPPED WITH:
-2 axis D.R.O.
USED MACHINE
LATHE ZMM 15x3000
ZMM
10190
MOD. CU 630/3000
WORKING RANGE:
Height of centers mm 315
Distance between centers mm 3000
Turning diameter over guides mm 630
Turning diameter over...
10190
MOD. CU 630/3000
WORKING RANGE:
Height of centers mm 315
Distance between centers mm 3000
Turning diameter over guides mm 630
Turning diameter over...
MEASURING ARM FARO CAM2
08116
PLATINUM ARM
2,4 mt and 6 axis
Repeatability test
EQUIPED WITH:
- Measuring arm
- Bluetooth
- Probes (1x3 mm) (1x6 mm)
- Plate for assembly
-...
PLATINUM ARM
2,4 mt and 6 axis
Repeatability test
EQUIPED WITH:
- Measuring arm
- Bluetooth
- Probes (1x3 mm) (1x6 mm)
- Plate for assembly
-...
SANDING MACHINE COSTA M70 CCS 1150
COSTA
07919
Working width mm 1350
Min/max working thickness 0,8-160 mm
Min/max work plane height mm 740-900
Abrasive belt motor power HP 16-20
Brush motor power...
07919
Working width mm 1350
Min/max working thickness 0,8-160 mm
Min/max work plane height mm 740-900
Abrasive belt motor power HP 16-20
Brush motor power...
TRIMMING BEADING OMERA R3/7
OMERA
07575
SPINDLE:
Spindle speed giri/min 8-434
Spindle height from platform mm 125
PRESSOR:
Max. pressor/ spindle mm 825
Min. distance pressor/ spindle mm 0...
07575
SPINDLE:
Spindle speed giri/min 8-434
Spindle height from platform mm 125
PRESSOR:
Max. pressor/ spindle mm 825
Min. distance pressor/ spindle mm 0...
UNIVERSAL MILLING INDUMA
INDUMA
07821
VISUALIZED
STROKES:
Axis X mm 1100
Axis Y mm 500
Axis Z mm 400
Spindle taper ISO 40
Spindle speed n. 18 / Rpm 31,5-1600
EQUIPPED WITH:
Universal...
07821
VISUALIZED
STROKES:
Axis X mm 1100
Axis Y mm 500
Axis Z mm 400
Spindle taper ISO 40
Spindle speed n. 18 / Rpm 31,5-1600
EQUIPPED WITH:
Universal...
.jpeg)
DRILLING BERGONZI MOD. TR40/1250
BERGONZI
09215
Max drilling on cast iron 50 mm
Max drilling on steel 40 mm
Thread capacity 40 mm
Fine thread capacity 50 mm
Arm mm 1250
Arm stroke 600 mm
Head...
09215
Max drilling on cast iron 50 mm
Max drilling on steel 40 mm
Thread capacity 40 mm
Fine thread capacity 50 mm
Arm mm 1250
Arm stroke 600 mm
Head...
DRILLING COMETRA 50x1600
DRILLING INVEMA MOD. FR40-1300
INVEMA
08204
Drilling capacity on steel mm 40
Drilling capacity on cast iron mm 50
Max arm mm 1300
Horizontal head stroke mm 1015
Vertical arm stroke mm...
08204
Drilling capacity on steel mm 40
Drilling capacity on cast iron mm 50
Max arm mm 1300
Horizontal head stroke mm 1015
Vertical arm stroke mm...
LATHE GRAZIANO SAG 210
GRAZIANO
08074
Height of centre mm 210
Max turning diameter over bed mm 420
Max turning diameter over slide mm 270
Ma turning diameter in gap mm 600
Distance...
08074
Height of centre mm 210
Max turning diameter over bed mm 420
Max turning diameter over slide mm 270
Ma turning diameter in gap mm 600
Distance...
LATHE MOMAC MOD. SV230
MOMAC
06866
Height of center 230 mm
Disance between centers 1500 mm
Max turning diameter over bed 450 mm
Max turning diameter over gap 640 mm
Max turning...
06866
Height of center 230 mm
Disance between centers 1500 mm
Max turning diameter over bed 450 mm
Max turning diameter over gap 640 mm
Max turning...
MILLING DEBER MOD. FU180M
DEBER
07367
TABLE
Working surface mm 1800x380
Longitudinal stroke mm 1200
Cross stroke mm 400
Vertical stroke mm 550
SPINDLE
Cone ISO 50
Speed rpm...
07367
TABLE
Working surface mm 1800x380
Longitudinal stroke mm 1200
Cross stroke mm 400
Vertical stroke mm 550
SPINDLE
Cone ISO 50
Speed rpm...
MILLING RAPID HEAD FULL MARK
FULL MARK
07165
MOD. FM 20 VS
Dimensions table mm 1370x300
Axis X stroke mm 860
Axis Y stroke mm 400
Axis Z stroke mm 400
Distance spindle - table mm 520
Head...
07165
MOD. FM 20 VS
Dimensions table mm 1370x300
Axis X stroke mm 860
Axis Y stroke mm 400
Axis Z stroke mm 400
Distance spindle - table mm 520
Head...
PUNCHING/SHEAR FICEP MOD. 1105N
FICEP
08786
Punching force kN 1100
Max diameter 32 mm
Max thickness 26 mm
Round bar cutter mm 50
Square bar cutter mm 50x50
Angular cutter 90 degrees mm...
08786
Punching force kN 1100
Max diameter 32 mm
Max thickness 26 mm
Round bar cutter mm 50
Square bar cutter mm 50x50
Angular cutter 90 degrees mm...
RAPID HEAD MILLING SUPERMAX YCM-2VAS
SUPERMAXX
07856
RAPID HEAD
TABLE AND STROKES:
Dimensions mm 1300x280
Longitudinal stroke mm 1000
Cross stroke mm 315
Vertical stroke mm 450
SPINDLE:
Spindle speed...
07856
RAPID HEAD
TABLE AND STROKES:
Dimensions mm 1300x280
Longitudinal stroke mm 1000
Cross stroke mm 315
Vertical stroke mm 450
SPINDLE:
Spindle speed...
SAW BAND FRIGGI 2/MF/520
FRIGGI
07825
AUTOMATIC
Fly-wheel diameter mm 620
Cutting capacity mm 520
Blade lenght mm 7260
Blade speed 20-85 m/min
Power installed KW 8,18
USED MACHINE
07825
AUTOMATIC
Fly-wheel diameter mm 620
Cutting capacity mm 520
Blade lenght mm 7260
Blade speed 20-85 m/min
Power installed KW 8,18
USED MACHINE
SAW BAND KASTO MOD. HBA 420 AU
KASTO
08105
Cutting capacity in the round mm 420
Cutting capacity in the flat mm 420x420
Band dimensions mm 6300x38x1,3
USED MACHINE
08105
Cutting capacity in the round mm 420
Cutting capacity in the flat mm 420x420
Band dimensions mm 6300x38x1,3
USED MACHINE
SHEAR PUNCHING OMERA MOD. OM/120/HY
OMERA
08146
SHEAR:
Max plate size mm 600x15
Blade width mm 610
Working height mm 700
SLOTTING:
Size in one stroke (width x depth x thickness) per R=40 Kg/mm2 ...
08146
SHEAR:
Max plate size mm 600x15
Blade width mm 610
Working height mm 700
SLOTTING:
Size in one stroke (width x depth x thickness) per R=40 Kg/mm2 ...
SLOTTING PERINI MOD. SM 250
PERINI
06964
-Tool travel mm 0-250
-Tool to column distance mm 380-410
-Ram adjustment mm 250
-Worktable mm 300x600
-Diameter of dividing table mm 300
-Head to...
06964
-Tool travel mm 0-250
-Tool to column distance mm 380-410
-Ram adjustment mm 250
-Worktable mm 300x600
-Diameter of dividing table mm 300
-Head to...
DRILLING BERGONZI TM50 SERIES 3
BERGONZI
09656
50x1250
DRILLING CAPACITY ON CAST IRON: 65 MM
DRILLING CAPACITY ON STEEL: 50 MM
THREADING: 50-65 MM
USEFUL REACH FROM COLUMN GAUGE: 1250 MM
ARM...
09656
50x1250
DRILLING CAPACITY ON CAST IRON: 65 MM
DRILLING CAPACITY ON STEEL: 50 MM
THREADING: 50-65 MM
USEFUL REACH FROM COLUMN GAUGE: 1250 MM
ARM...
SAW BAND BIANCO 71.51 SA 90°
BIANCO
08270
SEMI-AUTOMATIC
CUTTING CAPACITY 90 DEGREES:
-Round mm 510
-square mm 510
-Rectangle mm 710x510
Blade dimensions (LxWxH) mm 5800xx41x1.3
Worktop...
08270
SEMI-AUTOMATIC
CUTTING CAPACITY 90 DEGREES:
-Round mm 510
-square mm 510
-Rectangle mm 710x510
Blade dimensions (LxWxH) mm 5800xx41x1.3
Worktop...
BAR LOADER IEMCA BOSS 552-HD
IEMCA
07926
Type 32 L
Capacity:
Round Bars mm 5-51
Exagonal Bars mm 5-43
Square Bars mm 5-36
YEAR 2013
USED MACHINE
07926
Type 32 L
Capacity:
Round Bars mm 5-51
Exagonal Bars mm 5-43
Square Bars mm 5-36
YEAR 2013
USED MACHINE
DRILLING SERRMAC TCS
SERRMAC
09659
WITH PRISMATIC GUIDES
Drilling capacity on steel diameter mm 40
Drilling capacity on cast iron diameter mm 50
Spindle attachment CM 4
Spindle stroke...
09659
WITH PRISMATIC GUIDES
Drilling capacity on steel diameter mm 40
Drilling capacity on cast iron diameter mm 50
Spindle attachment CM 4
Spindle stroke...
GEAR HOBBING PFAUTER RS 9 KS
PFAUTER
07395
HORIZONTAL
Max piece lenght mm 800
Max piece diameter 320 mm
MODULE 10
EQUIPED WITH:
Chuck Pinto 310 3+3
USED MACHINE
07395
HORIZONTAL
Max piece lenght mm 800
Max piece diameter 320 mm
MODULE 10
EQUIPED WITH:
Chuck Pinto 310 3+3
USED MACHINE
GRINDING BERGAMINI
BERGAMINI
08777
MOD. BERMI 500 MATIC
Useful table surface 500x180 mm
Max longitudinal stroke manual and automatic 505 mm
Cross stroke manual and automatic 200...
08777
MOD. BERMI 500 MATIC
Useful table surface 500x180 mm
Max longitudinal stroke manual and automatic 505 mm
Cross stroke manual and automatic 200...
LATHE CASTOR 200x1000
BULCOM
09669
MOD. 205VSX1000
Distance between tips mm 1000
Tips height mm 205
Rotating diameter on the table mm 410
Spindle bore mm 55
EQUIPPED WITH:
-3-jaw chuck...
09669
MOD. 205VSX1000
Distance between tips mm 1000
Tips height mm 205
Rotating diameter on the table mm 410
Spindle bore mm 55
EQUIPPED WITH:
-3-jaw chuck...
LATHE ZMM MOD. SU 582
ZBS
09892
Height of centers mm 285
Distance between centers mm 2000
Swing diameter on the bed mm 580
Swing diameter on the cross slide mm 380
Bed width mm...
09892
Height of centers mm 285
Distance between centers mm 2000
Swing diameter on the bed mm 580
Swing diameter on the cross slide mm 380
Bed width mm...
PRESS BRAKE WARCOM MOD. PI 20-60
WARCOM
New05637
Max pressure Ton.60
Bending lenght mm.2050
Passage between columns mm.1550
Depth gap between columns mm.500
Ram stroke mm.125
Maximun open height...
New05637
Max pressure Ton.60
Bending lenght mm.2050
Passage between columns mm.1550
Depth gap between columns mm.500
Ram stroke mm.125
Maximun open height...
PRESS FARINA PFO 4050x80 TON
07779
Bed lenght mm 4050
Max force Ton 80
USED MACHINE
Bed lenght mm 4050
Max force Ton 80
USED MACHINE
RADIAL DRILLING WMW 40X1200
WMW
New05100
RADIUS MM.1200
DRILLING CAPACITY MM.40
QUILL STROKE MM.350
EQUIPED WITH CUBE
USED MACHINE
New05100
RADIUS MM.1200
DRILLING CAPACITY MM.40
QUILL STROKE MM.350
EQUIPED WITH CUBE
USED MACHINE
SAW MILL SCORTEGAGNA RUSCH
SCORTEGAGNA
07662
MOD. 275A
AUTOMATIC
Rectangular cutting capacity mm 275x275
Round cutting capacity mm 275
Square cutting capacity mm 275
Blade size mm...
07662
MOD. 275A
AUTOMATIC
Rectangular cutting capacity mm 275x275
Round cutting capacity mm 275
Square cutting capacity mm 275
Blade size mm...
SHEAR PUNCHING FICEP MOD. 805N
FICEP
08463
Punch stroke length from 0 up to 40 mm
Shear stroke length from 0 to max 53 mm
Number of punch strokes at 20 mm of free travel n / min 34
Number of...
08463
Punch stroke length from 0 up to 40 mm
Shear stroke length from 0 to max 53 mm
Number of punch strokes at 20 mm of free travel n / min 34
Number of...
SURFACE GRINDING ROSA RTRC 600
ROSA
07234
Tangential wheel and rectangular table
Longitudinal travel 700 mm
Cross travel 300 mm
Distance between table and spindle mm 300
Grinding diameter mm...
07234
Tangential wheel and rectangular table
Longitudinal travel 700 mm
Cross travel 300 mm
Distance between table and spindle mm 300
Grinding diameter mm...
SAW BAND MEP SHARK 332NC-EVO
MEP
09269
AUTOMATIC
CUTTING CAPACITY:
-0° Round 300 mm, square 260 mm, rectangle 330x260 mm
-45° left Round 260 mm, square 250 mm, rectangle 270x200 mm
-60°...
09269
AUTOMATIC
CUTTING CAPACITY:
-0° Round 300 mm, square 260 mm, rectangle 330x260 mm
-45° left Round 260 mm, square 250 mm, rectangle 270x200 mm
-60°...
LATHE COVEMA MOD. MAJOR 2060
COVEMA
07734
Height of center mm 250
Diameter over the bed mm 500
Diameter over the carriage mm 360
Distace between center mm 1500
Bed widht mm 350
Chuck diam. mm...
07734
Height of center mm 250
Diameter over the bed mm 500
Diameter over the carriage mm 360
Distace between center mm 1500
Bed widht mm 350
Chuck diam. mm...
LATHE GRAZIANO 210x1500
GRAZIANO
08072
MOD. SAG 210N
Height of center mm 210
Max swing diameter over cross slide mm 270
Max swing diameter over gap mm 600
Distance between centre mm...
08072
MOD. SAG 210N
Height of center mm 210
Max swing diameter over cross slide mm 270
Max swing diameter over gap mm 600
Distance between centre mm...
LATHE GRAZIOLI DANIA 300x2000
GRAZIOLI
08788
Height of center mm 300
Distance between center mm 2000
Spindle bore mm 105
Spindle taper CAM-LOCK 11''
EQUIPPED WITH:
- 1 axis D.R.O.
USED MACHINE
08788
Height of center mm 300
Distance between center mm 2000
Spindle bore mm 105
Spindle taper CAM-LOCK 11''
EQUIPPED WITH:
- 1 axis D.R.O.
USED MACHINE
SLOTTING PERINI MOD. SM 200
PERINI
08203
Tool travel da 0 a 200 mm
Strokes per minute 20-80
Worktable 300 x 600 mm
Automatic tool stop
Tilting head +/- 45 degrees
EQUIPPED WITH:
-Chuck...
08203
Tool travel da 0 a 200 mm
Strokes per minute 20-80
Worktable 300 x 600 mm
Automatic tool stop
Tilting head +/- 45 degrees
EQUIPPED WITH:
-Chuck...
LATHE ITAMA MOD. 250/15
ITAMA
08214
CAPACITY:
Turning diameter over the bed mm 465
Swing diameter on the cross carriage mm 290
Turning diameter in the gap mm 700
Distance between...
08214
CAPACITY:
Turning diameter over the bed mm 465
Swing diameter on the cross carriage mm 290
Turning diameter in the gap mm 700
Distance between...
SAW MILL SCORTEGAGNA RUSCH
RUSCH
06091
MOD. 275A
AUTOMATIC
Rectangular cutting capacity mm 275x275
Round cutting capacity mm 275
Square cutting capacity mm 275
Blade size mm...
06091
MOD. 275A
AUTOMATIC
Rectangular cutting capacity mm 275x275
Round cutting capacity mm 275
Square cutting capacity mm 275
Blade size mm...
LATHE KNUTH MOD. HRD60 PF
KNUTH
07625
WORKING DIMENSIONS
Max dimension round workpiece mm 60
Max dimension exagonal workpiece mm 51
Max dimension square workpiece mm 41
Revolver stroke...
07625
WORKING DIMENSIONS
Max dimension round workpiece mm 60
Max dimension exagonal workpiece mm 51
Max dimension square workpiece mm 41
Revolver stroke...
LATHE KNUTH MOD. HRD60 PF
KNUTH
07624
REVOLVER
Workpiece round max mm 60
Workpiece hexagonal max mm 51
Workpiece square max mm 41
Travel axial slide mm 90
Travel cross slide mm 100
Travel...
07624
REVOLVER
Workpiece round max mm 60
Workpiece hexagonal max mm 51
Workpiece square max mm 41
Travel axial slide mm 90
Travel cross slide mm 100
Travel...
SHEAR PUNCHING IMS MOD. HY75
IMS
07639
Punching diameter 28x20 mm
Slotting 90x52x12 mm
Angular cutting 90 degrees, 130x130x13 mm
Bars cutting diameter 45 mm
Shear 450x15 mm/300x20 mm
USED...
07639
Punching diameter 28x20 mm
Slotting 90x52x12 mm
Angular cutting 90 degrees, 130x130x13 mm
Bars cutting diameter 45 mm
Shear 450x15 mm/300x20 mm
USED...
SLOTTING MACHINE CAMS 200
CAMS
08800
Adjustable tool stroke from 0 to 200 mm
Distance between column and tool holder mm 350
Distance between rotary table and head 360 mm
Vertical...
08800
Adjustable tool stroke from 0 to 200 mm
Distance between column and tool holder mm 350
Distance between rotary table and head 360 mm
Vertical...
SLOTTING MACHINE MAJEVICA DM200
MAJEVICA
08328
Adjustable tool travel mm 0-200
Distance between column and tool holder 350 mm
Distance between table and head 370 mm
Distance between rotary table...
08328
Adjustable tool travel mm 0-200
Distance between column and tool holder 350 mm
Distance between table and head 370 mm
Distance between rotary table...
SAW BAND MEP SHARK 332 NC EVO
SHARK
09667
AUTOMATIC
MAX RECTANGULAR SECTION 330x260 mm
MAX SQUARED SECTION 260x260 mm
MAX CIRCULAR SECTION 300 mm
CUTTING ANGLE 0-60 degrees
TAPE DIMENSIONS...
09667
AUTOMATIC
MAX RECTANGULAR SECTION 330x260 mm
MAX SQUARED SECTION 260x260 mm
MAX CIRCULAR SECTION 300 mm
CUTTING ANGLE 0-60 degrees
TAPE DIMENSIONS...
CAR ELEVATOR KG 2500
FURNACE FM-77
09226
FOR HEAT TREATMENTS
Max temperature 1100 ° C
Chamber dimensions (LxHxP) mm 250x190x500
Overall dimensions (LxHxP) mm 800x580x900
Weight Kg 90
Power...
FOR HEAT TREATMENTS
Max temperature 1100 ° C
Chamber dimensions (LxHxP) mm 250x190x500
Overall dimensions (LxHxP) mm 800x580x900
Weight Kg 90
Power...
.jpeg)
LATHE ALPIN 180x1000
ALPIN
09828
WORKING CAPACITY:
Center height 180 mm
Turning diameter on the bed 360 mm
Distance between centers 1000 mm
SPINDLE:
Spindle nose CAMLOCK 6
Spindle...
09828
WORKING CAPACITY:
Center height 180 mm
Turning diameter on the bed 360 mm
Distance between centers 1000 mm
SPINDLE:
Spindle nose CAMLOCK 6
Spindle...
.jpg)
LATHE GORNATI 200x1000
GORNATI
10330
Center height 200 mm
Center distance 1000 mm
Bar passage 68 mm
COMPLETE WITH:
-Self-centering chuck diam. 220 mm
-ELBO dimension display
USED MACHINE
10330
Center height 200 mm
Center distance 1000 mm
Bar passage 68 mm
COMPLETE WITH:
-Self-centering chuck diam. 220 mm
-ELBO dimension display
USED MACHINE
LATHE GRAZIANO 260x1500
GRAZIANO
08753
MOD. SAG 20
Height centeroverbed mm 260
heoght centerover carriage mm 170
Distance between centers mm 1500
Bed width mm 360
Bar passaging mm...
08753
MOD. SAG 20
Height centeroverbed mm 260
heoght centerover carriage mm 170
Distance between centers mm 1500
Bed width mm 360
Bar passaging mm...
.jpeg)
LATHE GRAZIANO MOD. SAG 14
GRAZIANO
09407
Height of center (on the bed) mm 190
Height of center (on the gap) mm 250
Height of center (on the carriage) mm 120
Distance between mm 1000
Bar...
09407
Height of center (on the bed) mm 190
Height of center (on the gap) mm 250
Height of center (on the carriage) mm 120
Distance between mm 1000
Bar...
LATHE GRAZIOLI DANIA 180x1500
GRAZIOLI
09317
Center height 180 mm
Distance between centers mm 1500
Bed width 300 mm
Max turning diameter on the bed mm 1360
Max turning diameter on the carriage...
09317
Center height 180 mm
Distance between centers mm 1500
Bed width 300 mm
Max turning diameter on the bed mm 1360
Max turning diameter on the carriage...
LATHE MORANDO MOD. PA 30
MORANDO
08640
EQUIPPED WITH:
-N.2 rests
-Self-centering chuck
-Plateau
-Turret with toolholders
USED MACHINE
08640
EQUIPPED WITH:
-N.2 rests
-Self-centering chuck
-Plateau
-Turret with toolholders
USED MACHINE
LATHE PADOVANI LABOR 200
PADOVANI
07617
Distance between center mm 1000
Height of center mm 200
Diameter over bed mm 400
Diameter over carriage mm 250
Bar passaging mm 52
Spindle speed n.12...
07617
Distance between center mm 1000
Height of center mm 200
Diameter over bed mm 400
Diameter over carriage mm 250
Bar passaging mm 52
Spindle speed n.12...
MEASURING MACHINE POLI SKY 3
POLI
08093
MEASURING RANGE:
-X mm 650
-Y mm 500
-Z mm 400
Incremental digital red-out
Measuring system linear scales
Air-bearings sliding
Counterweight Z axis...
08093
MEASURING RANGE:
-X mm 650
-Y mm 500
-Z mm 400
Incremental digital red-out
Measuring system linear scales
Air-bearings sliding
Counterweight Z axis...
MILLING ARNO MOD. F20
ARNO
07626
Table dimensions mm 1250x270
Longitudinal mm 900
Cross mm 290
Vertical mm 400
Spindle taper ISO 40
Spindle speed n.12 - rpm 40-1750
Quill diameter...
07626
Table dimensions mm 1250x270
Longitudinal mm 900
Cross mm 290
Vertical mm 400
Spindle taper ISO 40
Spindle speed n.12 - rpm 40-1750
Quill diameter...
MILLING RIGIVA
RIGIVA
08710
Table dimensions mm 1100x270
Axis X stroke mm 900
Axis Y stroke mm 300
Axis Z stroke mm 500
Spindle speed ISO 40
Horizontal spindle speed n.12 - rpm...
08710
Table dimensions mm 1100x270
Axis X stroke mm 900
Axis Y stroke mm 300
Axis Z stroke mm 500
Spindle speed ISO 40
Horizontal spindle speed n.12 - rpm...
SANDING MWM M9 2RR
MWM
08101
GECAM MWM M9 2RR
Power input Kw 20
Band width mm 940
Dimesion belt mm 940 x1900
Weight Kg 1500
EQUIPPED WITH
Spare band
USED MACHINE
08101
GECAM MWM M9 2RR
Power input Kw 20
Band width mm 940
Dimesion belt mm 940 x1900
Weight Kg 1500
EQUIPPED WITH
Spare band
USED MACHINE
SLOTTING CABE MOD. 300 ST
CABE
09182
Tool stroke 300 mm
Gap mm 380
Rotary table diameter mm 480
Longitudinal table travel 350 mm
Cross travel 350 mm
Table rotation 360 degree
Strokes...
09182
Tool stroke 300 mm
Gap mm 380
Rotary table diameter mm 480
Longitudinal table travel 350 mm
Cross travel 350 mm
Table rotation 360 degree
Strokes...
TABLE CNC SCOTTI MOD. TEC 600
SCOTTI
New04061
Diameter table mm 600
Maximum rpm 20
Wormscrew-ring gear ratio 1/120
Motor/table faceplate ratio 1/120
Drive motor-nominal torque Nm 7/12
Angular...
New04061
Diameter table mm 600
Maximum rpm 20
Wormscrew-ring gear ratio 1/120
Motor/table faceplate ratio 1/120
Drive motor-nominal torque Nm 7/12
Angular...
LATHE BREDA MOD. BRL 250/2000
BREDA
07986
TECHNICAL FEATURES:
Height of center mm 255
Distance between center mm 2000
Swing over bed mm 515
Swing in gap mm 715
Swing over carriage mm 315
Bed...
07986
TECHNICAL FEATURES:
Height of center mm 255
Distance between center mm 2000
Swing over bed mm 515
Swing in gap mm 715
Swing over carriage mm 315
Bed...
LATHE COVEMA CHAMPION CP 1540
COVEMA
07786
Height center mm 190
Distance between center mm 1250
Swing over bed mm 390
Swing over cross slide mm 240
Swing in gap mm 610
Spindle bore mm...
07786
Height center mm 190
Distance between center mm 1250
Swing over bed mm 390
Swing over cross slide mm 240
Swing in gap mm 610
Spindle bore mm...
NOTCHING SIMASV SV 226/B
SIMASV
06962
VARIABLE ANGLE
Motor power Hp 4
Strokes per minute n.60
Tank capacity Lt 40
Table dimensions mm 790x950
Blade lenght mm 220
Approx. weight Kg...
06962
VARIABLE ANGLE
Motor power Hp 4
Strokes per minute n.60
Tank capacity Lt 40
Table dimensions mm 790x950
Blade lenght mm 220
Approx. weight Kg...
PROFILE BENDER TAURING DS 60
TAURING
09682
MOD. DS 60 HV PLUS
3 DRIVE ROLLERS
Roller shaft diameter 50 mm
Useful shaft length 115 mm
Upper multipurpose roller diameter 174 mm
Lower...
09682
MOD. DS 60 HV PLUS
3 DRIVE ROLLERS
Roller shaft diameter 50 mm
Useful shaft length 115 mm
Upper multipurpose roller diameter 174 mm
Lower...
SAW BAND MEP SHARK 320 CNC-FE
SHARK
07251
AUTOMATIC
-0 degrees round mm 260, square mm 250, rectangle mm 320x200
-45 degrees sx round mm 230, square mm 210, rectangle mm 240x200
Blade...
07251
AUTOMATIC
-0 degrees round mm 260, square mm 250, rectangle mm 320x200
-45 degrees sx round mm 230, square mm 210, rectangle mm 240x200
Blade...
SAW MEP COBRA 350 AX
MEP
09276
AUTOMATIC
DISC BLADE:
External disc diameter mm 350
Diameter internal bore mm 32
Blade thickness mm 3,4
CUTTING CAPACITY:
0° round mm 120, square mm...
09276
AUTOMATIC
DISC BLADE:
External disc diameter mm 350
Diameter internal bore mm 32
Blade thickness mm 3,4
CUTTING CAPACITY:
0° round mm 120, square mm...
LATHE ALPIN 200x1000
ALPIN
08775
Height of center mm 200
Distance between center mm 1000
Turning diameter on the carriage mm 240
Turning diameter on the gap mm mm 420
Bar passaging...
08775
Height of center mm 200
Distance between center mm 1000
Turning diameter on the carriage mm 240
Turning diameter on the gap mm mm 420
Bar passaging...
LATHE ITAMA MOD. 165/10
ITAMA
09510
Turning diameter over the bed mm 330
Turning diameter in the gap mm 476
Height of centers mm 166
Distance between centers mm 1000
Bed width mm...
09510
Turning diameter over the bed mm 330
Turning diameter in the gap mm 476
Height of centers mm 166
Distance between centers mm 1000
Bed width mm...
MEP SAW SHARK 330CNC FE
MEP
08421
AUTOMATIC CNC
-0 degrees round mm 260, square mm 230, rectangle mm 330x230
Blade dimensions mm 3150x25,4x0,9
Cutting speed mt/min 40/80
Motor power...
08421
AUTOMATIC CNC
-0 degrees round mm 260, square mm 230, rectangle mm 330x230
Blade dimensions mm 3150x25,4x0,9
Cutting speed mt/min 40/80
Motor power...
SANDING MACHINE CM MOD. L65
07822
tumble type
bocca size mm 660x730 - depth mm 670
Max height mm 3900
Diameter tamburo mm 520
Lenght tamburo mm 650
Max weight Kg 130
Max volume 52...
tumble type
bocca size mm 660x730 - depth mm 670
Max height mm 3900
Diameter tamburo mm 520
Lenght tamburo mm 650
Max weight Kg 130
Max volume 52...
SAW BAND IMET BS 350/60 AFI-E
IMET
08847
AUTOMATI CNC
CUTTING CAPACITY:
-0 degrees round mm 305, square mm 250, ractangle mm 350x200
-45 degrees round mm 250, square mm 230, rectangle mm...
08847
AUTOMATI CNC
CUTTING CAPACITY:
-0 degrees round mm 305, square mm 250, ractangle mm 350x200
-45 degrees round mm 250, square mm 230, rectangle mm...
SLOTTING EASTAR MOD.TS-350K
EASTAR
09791
Max stroke 350 mm
Table diameter 560 mm
Longitudinal table stroke 500 mm
Cross table stroke 520 mm
Beating piston speed 28,50,80,105 strokes per...
09791
Max stroke 350 mm
Table diameter 560 mm
Longitudinal table stroke 500 mm
Cross table stroke 520 mm
Beating piston speed 28,50,80,105 strokes per...
SLOTTING SACHMAN MOD. SYNCHRON 200
SACHMAN
07545
Tool stroke mm 0-225
Distance table surface and column lower end mm 350
Tool projection mm 400
Slide vertical movement mm 240
Swivel table diameter...
07545
Tool stroke mm 0-225
Distance table surface and column lower end mm 350
Tool projection mm 400
Slide vertical movement mm 240
Swivel table diameter...
SAW BAND MEP MOD. SHARK 320 AX
MEP
08241
AUTOMATIC
CUTTING CAPACITY:
- 0 degrees round mm 260, square mm 250, rectangle mm 320x200
- 45 degrees sx round mm 230, square mm 210, rectangle mm...
08241
AUTOMATIC
CUTTING CAPACITY:
- 0 degrees round mm 260, square mm 250, rectangle mm 320x200
- 45 degrees sx round mm 230, square mm 210, rectangle mm...
LATHE ANSELMI MONO FAP 225E
ANSELMI
08517
Distance between center mm 1500
Height of center mm 225
Max swing diameter over the gap mm 600
Max turning diameter over the bed mm 470
Max turning...
08517
Distance between center mm 1500
Height of center mm 225
Max swing diameter over the gap mm 600
Max turning diameter over the bed mm 470
Max turning...
SAW BAND MEP SHARK 281 NC EVO
MEP
07936
AUOTMATIC CNC
CUTTING CAPACITY:
-0° round mm 250, square mm 230, rectangle mm 280x200
-45° sx round mm 190, square mm 180, rectangle mm...
07936
AUOTMATIC CNC
CUTTING CAPACITY:
-0° round mm 250, square mm 230, rectangle mm 280x200
-45° sx round mm 190, square mm 180, rectangle mm...
.jpeg)
BREDA BRP 300 LATHE 300 x 3000
BREDA
10087
Distance between centers 3.000 mm
Height of centre mm 305
Turning diameter over carriage 400 mm
Swing over bed 600 mm
Spindle bore 80 mm
Equipped...
10087
Distance between centers 3.000 mm
Height of centre mm 305
Turning diameter over carriage 400 mm
Swing over bed 600 mm
Spindle bore 80 mm
Equipped...
.jpeg)
LATHE 300 X 3000 ARIS SN 601 R
ARIS
10088
Distance between centers: 3.000 mm
Heigh of center: 317,5 mm
Turning diameter over cross slide: 380 mm
Turning diameter over bed: 630 mm
Spindle...
10088
Distance between centers: 3.000 mm
Heigh of center: 317,5 mm
Turning diameter over cross slide: 380 mm
Turning diameter over bed: 630 mm
Spindle...
LATHE GRAZIANO SAG 20x2000
GRAZIANO
08264
Height center mm 254
Distance between center mm 2000
Width bed mm 360
Spindle bore mm 57
Spindle speed n.12 / rpm 26-1300
Spindle taper CAM-LOCK...
08264
Height center mm 254
Distance between center mm 2000
Width bed mm 360
Spindle bore mm 57
Spindle speed n.12 / rpm 26-1300
Spindle taper CAM-LOCK...
LATHE MCM TC 225x1500
MCM
09083
Center height 225 mm
Distance between centers mm 1500
EQUIPPED WITH:
-Chuck diameter 250 mm 3+3
-DRO
-Tool holder turret
-Steady rest
-Follow...
09083
Center height 225 mm
Distance between centers mm 1500
EQUIPPED WITH:
-Chuck diameter 250 mm 3+3
-DRO
-Tool holder turret
-Steady rest
-Follow...
LATHE PBR 250x1500
PBR
07765
MOD. TM-250P
Height of center mm 250
Distance between center mm 1500
EQUIPPED WITH:
-Self-centering chuck Pinto DG diam. mm 315
USED MACHINE
07765
MOD. TM-250P
Height of center mm 250
Distance between center mm 1500
EQUIPPED WITH:
-Self-centering chuck Pinto DG diam. mm 315
USED MACHINE
LATHE PONTIGGIA 175x1000
PONTIGGIA
08709
Height of center mm 175
Distance between center mm 1000
Bar capacity diameter mm 60
EQUIPPED WITH:
-Chuck diameter mm 200
-Toolholder turret
-N.6...
08709
Height of center mm 175
Distance between center mm 1000
Bar capacity diameter mm 60
EQUIPPED WITH:
-Chuck diameter mm 200
-Toolholder turret
-N.6...
MILLING RAMBAUDI MOD. M2
RAMBAUDI
08242
Axis X stroke mm 950
Axis Y stroke mm 300
Axis Z stroke mm 400
Ram stroke 400
Spindle taper ISO 40
Spindle speed n.16 / rpm 65-4750
EQUIPPED...
08242
Axis X stroke mm 950
Axis Y stroke mm 300
Axis Z stroke mm 400
Ram stroke 400
Spindle taper ISO 40
Spindle speed n.16 / rpm 65-4750
EQUIPPED...
SAW BAND BIANCO 350 CNC AF
BIANCO
07855
AUTOMATIC FIXED 90°
Cutting capacity 90°:
-round mm 260
-square mm 220
-rectangle mm 315x220
Blade dimensions mm 3010x27x0.9
Working surface height...
07855
AUTOMATIC FIXED 90°
Cutting capacity 90°:
-round mm 260
-square mm 220
-rectangle mm 315x220
Blade dimensions mm 3010x27x0.9
Working surface height...
SAW BAND MEP SHARK 320 AXI
MEP
08334
AUTOMATIC
CUTTING CAPACITY:
- 0° round mm 260, square mm 250, rectangle mm 320x200
- 45°sx round mm 230, square mm 210, rectangle mm 210x240
-...
08334
AUTOMATIC
CUTTING CAPACITY:
- 0° round mm 260, square mm 250, rectangle mm 320x200
- 45°sx round mm 230, square mm 210, rectangle mm 210x240
-...
SAW BAND THOMAS SAR 460 SA G
THOMAS
09700
CUTTING CAPACITY:
-90° round 460 mm, square 450 mm, rectangle 760x380 mm
-30° round 450 mm, square 440 mm, rectangle 600x400 mm
-45° round 400 mm,...
09700
CUTTING CAPACITY:
-90° round 460 mm, square 450 mm, rectangle 760x380 mm
-30° round 450 mm, square 440 mm, rectangle 600x400 mm
-45° round 400 mm,...
SLOTTING PERINI MOD. SM 200
PERINI
08351
TOOL TRAVEL 0-200 mm
DISTANCE BETWEEN TOOL AND COLUMN 380 mm
TABLE SIZE 300x600 mm
LONGITUDINAL TRAVEL 250 mm
TRANSVERSAL TRAVEL 280 mm
TOOL TRAVEL...
08351
TOOL TRAVEL 0-200 mm
DISTANCE BETWEEN TOOL AND COLUMN 380 mm
TABLE SIZE 300x600 mm
LONGITUDINAL TRAVEL 250 mm
TRANSVERSAL TRAVEL 280 mm
TOOL TRAVEL...
LATHE CAZENUVE MOD. 360 HB X
LATHE SWING 165x1000
SWING
07859
Height of center mm 165
Distanza between center mm 1000
Bar passaging diam. mm 42
EQUIPPED WITH:
-Double guide chuck diam. mm 200 3+3+3
-Follow rest...
07859
Height of center mm 165
Distanza between center mm 1000
Bar passaging diam. mm 42
EQUIPPED WITH:
-Double guide chuck diam. mm 200 3+3+3
-Follow rest...
LATHE PASQUINO MOD. P250
PASQUINO
07918
Hegith of center mm 250
Distance between center mm 1500
Turning diameter mm 315
Gap diameter mm 800 x L 160 mm
Spindle speed rpm 1400
EQUIPPED...
07918
Hegith of center mm 250
Distance between center mm 1500
Turning diameter mm 315
Gap diameter mm 800 x L 160 mm
Spindle speed rpm 1400
EQUIPPED...
PRESETTING ELBO CONTROLLI E238
ELBO CONTROLLI
09231
TECHNICAL FEATURES: MECHANICS
·Measuring range:
X axis 140 mm (0 280 mm)
Z axis 380 mm
· Mobile column system
· Base and column in rectified...
09231
TECHNICAL FEATURES: MECHANICS
·Measuring range:
X axis 140 mm (0 280 mm)
Z axis 380 mm
· Mobile column system
· Base and column in rectified...
WELDING TELWIN MOD. DIGITAL SUPERMIG 560 R.A.
TELWIN
New04898
WATER COOL VERSION
Mains frequency Hz 50 - 60
3ph mains voltage V230/400
Max absorbed power kW 27
Absorbed power at 60% kW 16,6
Power factory cosphi...
New04898
WATER COOL VERSION
Mains frequency Hz 50 - 60
3ph mains voltage V230/400
Max absorbed power kW 27
Absorbed power at 60% kW 16,6
Power factory cosphi...
LATHE BREDA 250x1500
BREDA
08143
MOD. BRN/F 250
Height of center mm 250
Turning diameter over the bed mm 500
Turning diameter over the carriage mm 320
Distance between center mm...
08143
MOD. BRN/F 250
Height of center mm 250
Turning diameter over the bed mm 500
Turning diameter over the carriage mm 320
Distance between center mm...
LATHE GRAZIOLI DANIA 315x1500
GRAZIOLI
08892
Height of center mm 315
Distance between center mm 1500
Spindle bore mm 105
USED MACHINE
08892
Height of center mm 315
Distance between center mm 1500
Spindle bore mm 105
USED MACHINE
PRESS SICMI 70 T PSS NC
SICMI
08028
Max load 70
Max pressure Bar 350
Approach speed mm/sec 20
Working speed mm/sec 2
Stroke cylinder mm 350
Power supply Volt 380
Total weight Kg...
08028
Max load 70
Max pressure Bar 350
Approach speed mm/sec 20
Working speed mm/sec 2
Stroke cylinder mm 350
Power supply Volt 380
Total weight Kg...
PROJECTOR MITUTOYO PH-A14
MITUTOYO
07872
With horizontal optical system and screen diam. mm 356
Measurement of workpieces with weigth to Kg 45
Plan XY mm 203x102
EQUIPPED WITH:
-DRO 2-axis...
07872
With horizontal optical system and screen diam. mm 356
Measurement of workpieces with weigth to Kg 45
Plan XY mm 203x102
EQUIPPED WITH:
-DRO 2-axis...
SAW BAND BIANCO MOD. 370 A 60
BIANCO
08826
AUTOMATIC
CUTTING CAPACITY:
-90 degrees round 280 mm, square 240 mm, rectangle 330x240 mm
-45 degrees round 220 mm, square 210 mm, rectangle 200x120...
08826
AUTOMATIC
CUTTING CAPACITY:
-90 degrees round 280 mm, square 240 mm, rectangle 330x240 mm
-45 degrees round 220 mm, square 210 mm, rectangle 200x120...
SAW BAND FMB MOD. 240 AV
SAW BAND FMB PEGASUS+G+VHZ
FMB
09714
MANUAL / GRAVITY FEEDING SYSTEM
INVERTER BLADE ROTATION
CUTTING CAPACITY:
-0 degrees round 330 mm, square 330 mm, rectangle 330x510 mm
-45 degrees...
09714
MANUAL / GRAVITY FEEDING SYSTEM
INVERTER BLADE ROTATION
CUTTING CAPACITY:
-0 degrees round 330 mm, square 330 mm, rectangle 330x510 mm
-45 degrees...
SLOTTING BACRI 160
TURNTABLE POSITIONER MECOME TRP5
CENTRE HEIGHT 160 mm
RIBON
08360
DISTANCE BETWEEN CENTRES 500 mm
WHEEL SIZE 400x40x127 mm
ACCESSORIES:
-DRESSING TOOL
-INTERNAL EQUIPMENT
USED MACHINE
08360
DISTANCE BETWEEN CENTRES 500 mm
WHEEL SIZE 400x40x127 mm
ACCESSORIES:
-DRESSING TOOL
-INTERNAL EQUIPMENT
USED MACHINE
LATHE ZMM CU 582 290x1500
ZMM
09415
Center height mm 290
Swing diameter on the bed mm 580
Swing diameter on the carriage mm 380
Bed width mm 400
Distance between centers mm 1500
Spindle...
09415
Center height mm 290
Swing diameter on the bed mm 580
Swing diameter on the carriage mm 380
Bed width mm 400
Distance between centers mm 1500
Spindle...
MILLING GAMBIN 3M
GAMBIN
09390
Table size mm 1520x385
Longitudinal stroke axis X mm 1000
Cross stroke axis Y mm 420
Vertical stroke axis Z mm 710
Max height workpiece mm 513...
09390
Table size mm 1520x385
Longitudinal stroke axis X mm 1000
Cross stroke axis Y mm 420
Vertical stroke axis Z mm 710
Max height workpiece mm 513...
MILLING INDUMA MOD. 3U
INDUMA
08893
TABLE:
Table surface mm 1524x310
Number and dimensions T-slots 3x18
Distance between T-slots mm 60
Rotation in both directions 45...
08893
TABLE:
Table surface mm 1524x310
Number and dimensions T-slots 3x18
Distance between T-slots mm 60
Rotation in both directions 45...
SAW BAND IMET
IMET
08104
CUTTING CAPACITY:
-0° round mm 305, square mm 260, rectangle mm 350x200
-45° right/left round mm 250, square mm 230, rectangle mm 230x200
-60°...
08104
CUTTING CAPACITY:
-0° round mm 305, square mm 260, rectangle mm 350x200
-45° right/left round mm 250, square mm 230, rectangle mm 230x200
-60°...
SAW SAWMILL 470
WELDING POSITIONER AUTOMA SPS150
BLASTING MACHINE CB
CB SABBIATRICI
07964
MOD. PAL 3-L
Cabinet internal dimensions :
-Height mm 780
-Width mm 1180
-Depth mm 800
Total overall dimensions mm 1180x800x1850H
USED MACHINE
07964
MOD. PAL 3-L
Cabinet internal dimensions :
-Height mm 780
-Width mm 1180
-Depth mm 800
Total overall dimensions mm 1180x800x1850H
USED MACHINE
CALETTATRICE HAIMER
HAIMER
08767
MOD. POWER CLAMP NEW GENERATION
Single chuck version
Tools: Solid carbide and HSS from Ø 3 – 32 mm
Power: 13 kW
EQUIPMENT:
-Standard coil V2008...
08767
MOD. POWER CLAMP NEW GENERATION
Single chuck version
Tools: Solid carbide and HSS from Ø 3 – 32 mm
Power: 13 kW
EQUIPMENT:
-Standard coil V2008...
HYDRAULIC PRESS SICMO PSS.S 70 TON
SICMI
10394
Ton max 70
Opening mm 900
Stroke mm 500
Pressure max 350
Speed mm/sec 20
kW-Volt 1.5-380
USED MACHINE
10394
Ton max 70
Opening mm 900
Stroke mm 500
Pressure max 350
Speed mm/sec 20
kW-Volt 1.5-380
USED MACHINE
PRESETTING ELBO CONTROLLI E238
ELBO CONTROLLI
09232
TECHNICAL FEATURES: MECHANICS
·Measuring range:
X axis 140 mm (diam. 280 mm)
Z axis 380 mm
· Mobile column system
· Base and column in rectified...
09232
TECHNICAL FEATURES: MECHANICS
·Measuring range:
X axis 140 mm (diam. 280 mm)
Z axis 380 mm
· Mobile column system
· Base and column in rectified...
SAW BAND MEP SHARK 280 SXI
MEP
09221
SEMIAUTOMATIC
Cutting capacity at 0 degrees:
-round 250 mm
-square mm 230
-rectangle 280x200 mm
Cutting capacity at 45 degrees left:
-round 190...
09221
SEMIAUTOMATIC
Cutting capacity at 0 degrees:
-round 250 mm
-square mm 230
-rectangle 280x200 mm
Cutting capacity at 45 degrees left:
-round 190...
SAW MILL FENDO 350 SA
FENDO
07850
SEMI-AUTOMATIC
CUTTING CAPACITY 90 DEGREES:
Cutting capacity round mm 350
Cutting capacity square mm 320x320
Cutting capacity rectangle mm...
07850
SEMI-AUTOMATIC
CUTTING CAPACITY 90 DEGREES:
Cutting capacity round mm 350
Cutting capacity square mm 320x320
Cutting capacity rectangle mm...
NOTCHING IMASV AF 226/B
SIMASV
07636
FIXED ANGLE
Max lenght 220x220 mm
Max thickness 6 mm
Motor 3 kw
Working plane 650x650 mm with squares with T-slots
USED MACHINE
07636
FIXED ANGLE
Max lenght 220x220 mm
Max thickness 6 mm
Motor 3 kw
Working plane 650x650 mm with squares with T-slots
USED MACHINE
SANDING LAMPUGNANI T 71 B 2
LAMPUGNANI
08100
Useful dimensions 1100 x 850 x 750 H
Overall dimensions mm1170 x 1350 x 1770 H
Rotary table mm 700
Weight kg 200
Electric fan Cyclon Hp 0,75
USED...
08100
Useful dimensions 1100 x 850 x 750 H
Overall dimensions mm1170 x 1350 x 1770 H
Rotary table mm 700
Weight kg 200
Electric fan Cyclon Hp 0,75
USED...
SAW BAND IMET MOD. GBS 242 GH
IMET
09256
Cutting capacity at 0°:
-Round 250 mm
-Square 210 mm
-Rectangle 290x210 mm
Cutting capacity at 45° left:
-Round 220 mm
-Square 200 mm...
09256
Cutting capacity at 0°:
-Round 250 mm
-Square 210 mm
-Rectangle 290x210 mm
Cutting capacity at 45° left:
-Round 220 mm
-Square 200 mm...
.jpeg)
WELDING POSITIONER PASSERINI P005
SAW BAND FMB OMEGA
07250
SEMI-AUTOMATIC
Cutting capacity:
-90 degrees round 230, square 230, rectangle 230x230 280x200 310x200
-60 degrees Dx-R round 100, square 100,...
SEMI-AUTOMATIC
Cutting capacity:
-90 degrees round 230, square 230, rectangle 230x230 280x200 310x200
-60 degrees Dx-R round 100, square 100,...
GRINDING SURFACE DELTA
09856
MOD. LB300
Distance between column axis and grinding wheel 300 mm
Max distance between plane and grinding wheel 280 mm
Max grinding surface mm...
MOD. LB300
Distance between column axis and grinding wheel 300 mm
Max distance between plane and grinding wheel 280 mm
Max grinding surface mm...
COMPRESSOR DGM CS 75 TEP
DEVIDING HEAD
08132
Height of center mm 260
Diameter mm 400
EQUIPPED WITH:
-Sel centering chuck diam 310 double guide
-Tailstock
USED MACHINE
Height of center mm 260
Diameter mm 400
EQUIPPED WITH:
-Sel centering chuck diam 310 double guide
-Tailstock
USED MACHINE
ELECTRIC MARKING MACHINE PRYOR
SAW PEDRAZZOLI D.320
SAW BAND BIANCO 280 M 60
BIANCO
07667
CUTTING CAPACITY
- Round 90 degree mm 220
- square 90 degree mm 220
- Rectangle 90 degree mm 260X140
- Round 45 degree mm 160
- Square 45 degree mm...
07667
CUTTING CAPACITY
- Round 90 degree mm 220
- square 90 degree mm 220
- Rectangle 90 degree mm 260X140
- Round 45 degree mm 160
- Square 45 degree mm...
SAW BAND BIANCO MOD. 270
BIANCO
07975
MANUAL
Cutting capacity:
-90 degrees Round mm 220, Square mm 220, Rectangle mm 260x140
-45 degrees Round mm 160, Square mm 160, Rectangle mm...
07975
MANUAL
Cutting capacity:
-90 degrees Round mm 220, Square mm 220, Rectangle mm 260x140
-45 degrees Round mm 160, Square mm 160, Rectangle mm...
SAW BAND BIANCO MOD. 270 M 60
BIANCO
07666
MANUAL
CUTTING CAPACITY:
-90 degrees Round mm 215, square mm 215, rectangle mm 250x150
-45 degrees Round mm 155, square mm 145, rectangle mm...
07666
MANUAL
CUTTING CAPACITY:
-90 degrees Round mm 215, square mm 215, rectangle mm 250x150
-45 degrees Round mm 155, square mm 145, rectangle mm...
SAW BAND MEP MOD. SHARK 260
MEP
07348
CUTTING CAPACITY:
-0 degrees Round mm 210, Square mm 200, Rectangle mm 270x200
-45 degrees Sx Round mm 180, Square mm 180, Rectangle mm 180x190
-60...
07348
CUTTING CAPACITY:
-0 degrees Round mm 210, Square mm 200, Rectangle mm 270x200
-45 degrees Sx Round mm 180, Square mm 180, Rectangle mm 180x190
-60...
ROUGHNESS MITUTOYO
MITUTOYO
07873
MOD. SURFTEST SJ-210
EQUIPPED WITH:
-GRANITE SUPPORT
-ADAPTER FOR GRANITE SUPPORT
USED MACHINE
07873
MOD. SURFTEST SJ-210
EQUIPPED WITH:
-GRANITE SUPPORT
-ADAPTER FOR GRANITE SUPPORT
USED MACHINE
.jpg)
BAND SAW FMB PHOENIX
FMB
09046
MANUAL
Blade dimensions mm 2450x27x0,9
Cutting capacity 90 degrees:
-round mm 220
-square mm 200 x 200
-rectangle mm 200x220 o 250x110
Cutting...
09046
MANUAL
Blade dimensions mm 2450x27x0,9
Cutting capacity 90 degrees:
-round mm 220
-square mm 200 x 200
-rectangle mm 200x220 o 250x110
Cutting...
BAND SAW MEP MOD. PH 261-1 HB
MEP
08961
MANUAL
CUTTING CAPACITY:
0 ° round 225 mm, square 200 mm, rectangle 240x160 mm
+ 45 ° round 160 mm, square 140 mm, rectangle 155x115 mm
+ 60 °...
08961
MANUAL
CUTTING CAPACITY:
0 ° round 225 mm, square 200 mm, rectangle 240x160 mm
+ 45 ° round 160 mm, square 140 mm, rectangle 155x115 mm
+ 60 °...
D'ANDREA HEAD TA 120
MILLING ARNO
ARNO
08355
TABLE DIMENSIONS 1100x250 mm
LONGITUDINAL STROKE 750 mm
CROSS TRAVEL 200 mm
ACCESSORIES:
-2-STEPS GEAR BOX
USED MACHINE
08355
TABLE DIMENSIONS 1100x250 mm
LONGITUDINAL STROKE 750 mm
CROSS TRAVEL 200 mm
ACCESSORIES:
-2-STEPS GEAR BOX
USED MACHINE
PRESETTING ELBO CONTROLLI
ELBO CONTROLLI
08778
MOD. E238 ARA
Axis X mm 140 (diam 280 mm)
Axis Z mm 380
Rotary spindleholder interchangeable
Base and column in grounded granite
Special prismatic...
08778
MOD. E238 ARA
Axis X mm 140 (diam 280 mm)
Axis Z mm 380
Rotary spindleholder interchangeable
Base and column in grounded granite
Special prismatic...
SAW BAND IMET MOD. GBS 218
IMET
09898
MANUAL
Area angular cut degrees 90 +30
Cutting capacity:
- 90 degrees round mm 220
- 90 degrees square mm 210
- 90 degrees rectangular mm...
09898
MANUAL
Area angular cut degrees 90 +30
Cutting capacity:
- 90 degrees round mm 220
- 90 degrees square mm 210
- 90 degrees rectangular mm...
SAW BAND MEP SHARK 200
MEP
08103
-0 degrees round mm 160, square mm 2160, rectangle mm 200x100
-45 degrees left round mm 130, square mm 120, rectangle mm 140x60
-60 degrees left...
08103
-0 degrees round mm 160, square mm 2160, rectangle mm 200x100
-45 degrees left round mm 130, square mm 120, rectangle mm 140x60
-60 degrees left...
SAW BAND THOMAS MOD. ZIP30
THOMAS
09755
MANUAL BELT
Cut from 0 to 60 degrees to the right
Cutting capacity:
-Round 0 degrees 225 mm / 45 degrees 140 mm / 60 degrees 60 mm
-Square 0 degrees...
09755
MANUAL BELT
Cut from 0 to 60 degrees to the right
Cutting capacity:
-Round 0 degrees 225 mm / 45 degrees 140 mm / 60 degrees 60 mm
-Square 0 degrees...
SURFACE GRINDING ALPA MOD. MS 102
ALPA
08362
TABLE SIZE 390x175 mm
WHEEL SIZE 180 mm
MOTOR POWER 1.84 kW
WEIGHT 500 Kg
OVERALL DIMENSIONS 1000x1200x1800 mm
EQUIPPED WITH:
-MAGNETIC CHUCK 160X280...
08362
TABLE SIZE 390x175 mm
WHEEL SIZE 180 mm
MOTOR POWER 1.84 kW
WEIGHT 500 Kg
OVERALL DIMENSIONS 1000x1200x1800 mm
EQUIPPED WITH:
-MAGNETIC CHUCK 160X280...
MAGNETIC TABLE
09499
Magnetic table for grinding
Dimensions 800 x 300 mm
USED MACHINE
Magnetic table for grinding
Dimensions 800 x 300 mm
USED MACHINE
SAW BAND PEDRAZZOLI BROWN
PEDRAZZOLI
09843
SN 270 SA-PN
SEMI-AUTOMATIC
Cutting capacity:
90° round 230 mm, square 200 mm, rectangular 250x150 mm
45° round 170 mm, square 120 mm, rectangular...
09843
SN 270 SA-PN
SEMI-AUTOMATIC
Cutting capacity:
90° round 230 mm, square 200 mm, rectangular 250x150 mm
45° round 170 mm, square 120 mm, rectangular...
SAW FMB MOD. TRITON
FMB
08756
MANUAL
Cutting capacity:
-0 degrees round 230 mm, square 230x230 mm, rectangle 280x170 mm
-45 degrees round 175 mm, square 165x165 mm, rectangle...
08756
MANUAL
Cutting capacity:
-0 degrees round 230 mm, square 230x230 mm, rectangle 280x170 mm
-45 degrees round 175 mm, square 165x165 mm, rectangle...
WIRE WELDING TELWIN MASTERMIG 400
TELWIN
07593
Absorbed power 60%/max 10/20 kw
Voltage (50/60 Hz) 230-400V 3ph
Adjusting range 50:400A
Output current 400A@25% / 240A@60%
WITH:
Coolant unit CEBORA...
07593
Absorbed power 60%/max 10/20 kw
Voltage (50/60 Hz) 230-400V 3ph
Adjusting range 50:400A
Output current 400A@25% / 240A@60%
WITH:
Coolant unit CEBORA...
SAW BAND MIVA SP 280 M
MIVA
08336
MANUAL
MAX RECTANGULAR SECTION 155x250 mm
MAX SQUARE SECTION 215x215 mm
MAX CIRCULAR SECTION 220 mm
OVERALL DIMENSIONS 875x1570x1745 mm
USED MACHINE
08336
MANUAL
MAX RECTANGULAR SECTION 155x250 mm
MAX SQUARE SECTION 215x215 mm
MAX CIRCULAR SECTION 220 mm
OVERALL DIMENSIONS 875x1570x1745 mm
USED MACHINE
CHAMFERING MACHINE ACETI
SAW CYRCULAR THOMAS 315
THOMAS
07162
Disc size 315 mm
Cutting capacity 90 degree
Round 95 mm
Square 80 mm
Rectangle 100x70 mm
Motor power 1,3-1,9 Kw
Weight 135 Kg
USED MACHINE
07162
Disc size 315 mm
Cutting capacity 90 degree
Round 95 mm
Square 80 mm
Rectangle 100x70 mm
Motor power 1,3-1,9 Kw
Weight 135 Kg
USED MACHINE
WELDING WEMI W500FX
WEMI
09757
Input voltage 230/400V - 50/60Hz
Duty Cycle 86.7/50.2 A at 60%
Duty Cycle 67.5/39.1 A at 100%
Power 60% 32.9 KVA
Power 100% 25.6 KVA
Wire diameter...
09757
Input voltage 230/400V - 50/60Hz
Duty Cycle 86.7/50.2 A at 60%
Duty Cycle 67.5/39.1 A at 100%
Power 60% 32.9 KVA
Power 100% 25.6 KVA
Wire diameter...
Current range A 30:300
CEA
07352
Max power KVA 13
Power factor cos 0,97
Secondary no load voltage V 17:41
Current at 100% A 150
Current at 60% A 200
Max rated current at 30% A...
07352
Max power KVA 13
Power factor cos 0,97
Secondary no load voltage V 17:41
Current at 100% A 150
Current at 60% A 200
Max rated current at 30% A...
WELDING WELDTRONIC MOD. SYNTH 315
WELDTRONIC
07355
Absorbed current r.i. 100% V230 20
Absorbed current r.i. 100% V400 11,5
Absorbed power r.i. 100% KVA 7,5
COS-PHI 0,9
Cover fuse A (400 V) 15
feed...
07355
Absorbed current r.i. 100% V230 20
Absorbed current r.i. 100% V400 11,5
Absorbed power r.i. 100% KVA 7,5
COS-PHI 0,9
Cover fuse A (400 V) 15
feed...
WELDING WELDTRONIC MOD. SYNTH 315
WELDTRONIC
07354
Absorbed current r.i. 100% V230 20
Absorbed current r.i. 100% V400 11,5
Absorbed power r.i. 100% KVA 7,5
COS-PHI 0,9
Cover fuse A (400 V) 15
Feed...
07354
Absorbed current r.i. 100% V230 20
Absorbed current r.i. 100% V400 11,5
Absorbed power r.i. 100% KVA 7,5
COS-PHI 0,9
Cover fuse A (400 V) 15
Feed...
WIRE WELDING WEMI MOD. W356C
WEMI
07594
with wheels
Voltage 3-phase V 230-400
Frequency Hz 50
Current at 60% A 39,7-22,8
Max current 100% A 25,8-14,8
Power at 60% KVA 15,8
Power at 100%...
07594
with wheels
Voltage 3-phase V 230-400
Frequency Hz 50
Current at 60% A 39,7-22,8
Max current 100% A 25,8-14,8
Power at 60% KVA 15,8
Power at 100%...
.jpg)
SANDING MACHINE LM1
08401
BELT SIZE 1500x120 mm
OVERALL DIMENSIONS 700x300x400 mm
USED MACHINE
BELT SIZE 1500x120 mm
OVERALL DIMENSIONS 700x300x400 mm
USED MACHINE
BORING PAMA ACC 127/280
PAMA
07119
CNC SIEMENS 840D
-N.2 tables mm 2000x2000
Height mm 900/950
Load 30 Ton
Table stroke mm 2500
-Longitudinal stroke mm 14000
-Vertical stroke mm...
07119
CNC SIEMENS 840D
-N.2 tables mm 2000x2000
Height mm 900/950
Load 30 Ton
Table stroke mm 2500
-Longitudinal stroke mm 14000
-Vertical stroke mm...
BORING TRAVEL COLUMN SKODA WD 160
06563
Diameter of working spindle: 160 mm
Taper in spindle: 100 metric
Height of bed: 480 mm
Width bed: 1600 mm
Cross travel stand on the bed X: 3150...
Diameter of working spindle: 160 mm
Taper in spindle: 100 metric
Height of bed: 480 mm
Width bed: 1600 mm
Cross travel stand on the bed X: 3150...
CENTER SECMU FAS MOD. SISTEMA 5
SECMU
05912
CNC FAS
Axis X mm.1000
Axis Y mm.630
Axis Z mm.630
Rapid speed axis X mm/min 15000
Rapid speed axis Y mm/min 15000
Rapid speed axis Z mm/min...
05912
CNC FAS
Axis X mm.1000
Axis Y mm.630
Axis Z mm.630
Rapid speed axis X mm/min 15000
Rapid speed axis Y mm/min 15000
Rapid speed axis Z mm/min...
.jpg)
PORTAL MILLING ZAYER FMU 14.000
MAGAZZINO
06540
TECHNICAL SPECIFICATIONS:
-CNC HEIDENHAIN 530 (NEW)
-Table Surface 14.000 X 2.500 mm
-Longitudinal Traverse (axis X) with joint tables 14.000...
06540
TECHNICAL SPECIFICATIONS:
-CNC HEIDENHAIN 530 (NEW)
-Table Surface 14.000 X 2.500 mm
-Longitudinal Traverse (axis X) with joint tables 14.000...
Vertical Lathe BERTHIEZ TVR 100
06780
CNC Siemens 840 D
Faceplate diameter mm 1.000
Max machining diameter mm 1.250
Max workpiece height mm 850
Max workpiece weight kg 1.500
Faceplate...
CNC Siemens 840 D
Faceplate diameter mm 1.000
Max machining diameter mm 1.250
Max workpiece height mm 850
Max workpiece weight kg 1.500
Faceplate...
VERTICAL LATHE CARNAGHI MOD. AC24- TT2
06571
CNC SINUMERIK 840 D
Faceplate diameter mm 2200
Turning diameter mm 2400
Max height mm 900
Crossrail travel mm 700
Max vertical travel Z axis mm...
CNC SINUMERIK 840 D
Faceplate diameter mm 2200
Turning diameter mm 2400
Max height mm 900
Crossrail travel mm 700
Max vertical travel Z axis mm...
